I wanted the bent plexi as MetallicAcid says, it looks better in there
A slide panel you mean? That's an interesting idea but I wouldn't know how to do that it'll be a fixed psu cover I'm afraid. But there'll be a handy dandy drain point, so taking it apart won't be a mess
(Yes, it will be sat straight )
Now for these. A pass through for the tubing from pump to GPU and an SSD.
This pass through thingy is too narrow to put over the plexi, and I don't want to put it over the aluminium cover.
So I made it like this. A hole just big enough for the thing to fit in without it moving around.
For the SSD, holes have to be cut out for the power and data cable.
Painting the data cable's white connector black first
And the front piece of aluminium has gotten its final coat of blackness. That dust is too bad I guess (luckily only the right side part will be visible, and that's with the side panel off, so...)