It's a box
And inside the box...
Clear plexi! ^^ I ordered two sheets of 3mm thick, but somewhere something went a bit wrong I guess. Not that I mind, I can still use some thicker plexi very well.
White XSPC tubing! 7/16 5/8
Cooling thingies for the graphics card.
Bitspower Q-adapter (rotary) to make a drainpoint after the pump.
And some U-channel for the window.
There were also some leds and extensions.
So I started sleeving the 'heatshrinkless' way
It's not easy to get it right at the start. But in the end you get this 'feel' for it ^^
Sleeve goes up to here somewhere. In between the pins and the cable.
A piece of heatshrink at the edge:
Burn the edge with the heatshrink on. Cut heatshrink off and there you go:
Thanks to Luto0 for his amazing guides on sleeving! ^^