Originally Posted by Ropey
It seems that you still have them in single channel mode and in Slot 1 and 2 rather than Slot 1 and 3. Regarding overclocking your memory higher. You might need to apply +1v to your MCH and your Vdimm to 2.2v to go higher. Set your timing to 5 - 5 - 5 - 15 to test for higher speeds.
1. Yes those pictures were before swapping the dimm from slot 2 to slot 3, so yes you are correct; sorry about the confusion.
2. The voltage can be changed in ther bios where I changed memory and cpu FSB and freq, but I don't know how to set the timings, how do I do that?
Thank you so much for the help!
Ps. Here is picture of the memory tab with the memoryt listed as dual now.