Overclock.net › Forums › Intel › Intel Motherboards › Offset Overclocking Help Please
New Posts  All Forums:Forum Nav:

Offset Overclocking Help Please

post #1 of 2
Thread Starter 
I tried today to ditch my fixed OC in favor of an offset. However, I ran into some issues...

With a fixed VCore of 1.270, CPU PLL of 1.550, I can run 4.5ghz and record high temps around 80-81 in P95.

However, when I tried the offset method with a zero offset, the VCore goes all the way up to 1.390 at times and temps soar to the low to mid 90's. This despite my VID reading in the 1.250 range. I tried lowering the offset, but even a -0.005 offset causes idle problems with apps crashing, BSOD, etc.

Am I missing something about setting up an offset overclock? Sure, I'd like to have it set up to let the voltage drop when at idle, but not at the expense of that VCore under load and those temps.

Full specs are in my sig...

Thanks in advance for any help!
post #2 of 2
Its weird because with a 1.25VID and 0,000v offset, the vcore should not get up to 1.39v.


Have you checked this guide to see if you are not missing something?

CPU Core Voltage Offset Mode Overclocking

And this one

http://www.overclock.net/t/1219588/updated-part-ii-offset-mode-overclocking-starter-guide-and-thread/0_30

How do you set your Load Line calibration?
Edited by KaRLiToS - 4/1/13 at 10:48pm
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
Quad Damage
(24 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 4930k @ 4.6Ghz Asus Rampage IV Extreme (Koolance Full WB) 2 x GTX 1080ti FE in SLI (EK WATERBLOCK) Corsair Dominator GT 2133 MHz (16GB) 
Hard DriveHard DriveHard DriveHard Drive
3 TB Seagate OCZ Vertex 4 256GB Crucial M4 128GB ADATA SX900 128GB 
CoolingCoolingCoolingCooling
RIVE Koolance Waterblock (VRM and PCH) Feser X-Changer 360 Feser X-Changer 240 Feser X-Changer 480 
CoolingCoolingCoolingOS
WaterCool MoRA3 Pro with Gentle Typhoon 3 x MCP 655 pumps (With EK top...all serial) 2 x EK FC 1080ti Blocks Windows 7 Ultimate x64 
MonitorMonitorKeyboardPower
Asus ROG Swift PG348Q (3440x1440 @100hz) CrossOver 27Q Led-P Logitech G15 EVGA SuperNova 1600T2 (Titanium) 
CaseMouseMouse PadAudio
Corsair Obsidian Heavily Modded Logitech G700 RocketFish Speed/Control M-audio AV-40 (Logitech G-35) 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel Motherboards
Overclock.net › Forums › Intel › Intel Motherboards › Offset Overclocking Help Please