Overclock.net › Forums › Components › Hard Drives & Storage › Dropped hard drive seems to be working but I'm not sure
New Posts  All Forums:Forum Nav:

Dropped hard drive seems to be working but I'm not sure

post #1 of 5
Thread Starter 
I accidentally dropped my old 1TB Seagate drive from about 60cm high when I was putting it in the HDD caddy, obviously it wasn't on. Plugged it in the mobo and it corrupted my bios, it took a cmos clearing and several power cycles to get my rig up and running again, but the disk gets recognized by everything, it passed badblocks and fsck in linux and chkdsk in windows, all of them without any errors, smart report looks good also. It is currently running a burn-in script, it reads-writes-reads the whole disk and compares smart table before and after. If it passes that I'm pretty sure it's fine but I'm worried about the bios corruption, anyone with some advice if I should trust the disk and if it has anything to do with my bios corrupting?

ps. it will be running in a parity protected array in a nas so it's not like it will hold mission critical data
Footrest
(17 items)
 
server
(17 items)
 
HTPC
(12 items)
 
CPUMotherboardGraphicsRAM
2 x Xeon L5520 Supermicro X8DTL-i HD4550 Samsung 6x4GB ECC 
Hard DriveHard DriveCoolingOS
3 x 2TB WD Green 160GB WD Blue Hyper 212+ and EVO ESXi 
OSOSOSPower
unRaid pfSense Ubuntu CX430v2 
CaseOtherOther
CM Elite 331 TP-Link TG-3269 Sil3512 Sata controller 
CPUMotherboardRAMHard Drive
i3-2100T Asus P8H61-I Geil Black Dragon 1333 2x2GB PXE Network boot 
Optical DriveCoolingOSMonitor
OEM Slim DVD Burner Scythe Big-Shuriken OpenElec Panasonic TX-P42G30E 42" HDTV 
KeyboardCase
Lenovo n5901a Silverstone SG-05 
  hide details  
Reply
Footrest
(17 items)
 
server
(17 items)
 
HTPC
(12 items)
 
CPUMotherboardGraphicsRAM
2 x Xeon L5520 Supermicro X8DTL-i HD4550 Samsung 6x4GB ECC 
Hard DriveHard DriveCoolingOS
3 x 2TB WD Green 160GB WD Blue Hyper 212+ and EVO ESXi 
OSOSOSPower
unRaid pfSense Ubuntu CX430v2 
CaseOtherOther
CM Elite 331 TP-Link TG-3269 Sil3512 Sata controller 
CPUMotherboardRAMHard Drive
i3-2100T Asus P8H61-I Geil Black Dragon 1333 2x2GB PXE Network boot 
Optical DriveCoolingOSMonitor
OEM Slim DVD Burner Scythe Big-Shuriken OpenElec Panasonic TX-P42G30E 42" HDTV 
KeyboardCase
Lenovo n5901a Silverstone SG-05 
  hide details  
Reply
post #2 of 5
ok? should be fine
WSV2
(15 items)
 
Home Server
(16 items)
 
Acer S7
(5 items)
 
CPUMotherboardGraphicsGraphics
3930K X79S-UP5 Zotac 770  K2000 
RAMHard DriveCoolingOS
G Skill Ripjaws Z  Twin Samsung 840 Pro Rasa Block  Windows 8.1 Professional  
OSMonitorKeyboardPower
Mountain Lion 10.8 (3) AOC IPS 23 Corsair K90 XFX PRO 850 
CaseMouse
800 D G700 
CPUMotherboardGraphicsRAM
Intel I3 2120 Asus Sabertooth Gigabyte GT220 Hyper X 8gb 
Hard DriveHard DriveOptical DriveCooling
(2) Seagate 1tb (3) Seagate 500gb None Stock Intel  
OSOSMonitorKeyboard
WHS 2011 Lion 10.7.3 Asus 24inch Logitech 
PowerCaseMouseAudio
Thermaltake 600w Cheapie Mircrosoft  On board  
CPUGraphicsRAMOptical Drive
I7 4500U Intel 4400 8GB PCI 256gb 
OS
Windows 8.1 
  hide details  
Reply
WSV2
(15 items)
 
Home Server
(16 items)
 
Acer S7
(5 items)
 
CPUMotherboardGraphicsGraphics
3930K X79S-UP5 Zotac 770  K2000 
RAMHard DriveCoolingOS
G Skill Ripjaws Z  Twin Samsung 840 Pro Rasa Block  Windows 8.1 Professional  
OSMonitorKeyboardPower
Mountain Lion 10.8 (3) AOC IPS 23 Corsair K90 XFX PRO 850 
CaseMouse
800 D G700 
CPUMotherboardGraphicsRAM
Intel I3 2120 Asus Sabertooth Gigabyte GT220 Hyper X 8gb 
Hard DriveHard DriveOptical DriveCooling
(2) Seagate 1tb (3) Seagate 500gb None Stock Intel  
OSOSMonitorKeyboard
WHS 2011 Lion 10.7.3 Asus 24inch Logitech 
PowerCaseMouseAudio
Thermaltake 600w Cheapie Mircrosoft  On board  
CPUGraphicsRAMOptical Drive
I7 4500U Intel 4400 8GB PCI 256gb 
OS
Windows 8.1 
  hide details  
Reply
post #3 of 5
why would you worry about BIOS corruption when you dropped the HDD?

The HDD my be fine at the moment, just check on it continually every now and then.
post #4 of 5
Thread Starter 
It might be coincidence but it just happened at the same time. I've shut down my system, pulled out the HDD, dropped it, put it back in the system to check it and it failed booting and complained about the bios being corrupted, it might not have anything to do with the HDD but it just seems unlikely to me.

Also is the read error count anything meaningful in the smart table?
Footrest
(17 items)
 
server
(17 items)
 
HTPC
(12 items)
 
CPUMotherboardGraphicsRAM
2 x Xeon L5520 Supermicro X8DTL-i HD4550 Samsung 6x4GB ECC 
Hard DriveHard DriveCoolingOS
3 x 2TB WD Green 160GB WD Blue Hyper 212+ and EVO ESXi 
OSOSOSPower
unRaid pfSense Ubuntu CX430v2 
CaseOtherOther
CM Elite 331 TP-Link TG-3269 Sil3512 Sata controller 
CPUMotherboardRAMHard Drive
i3-2100T Asus P8H61-I Geil Black Dragon 1333 2x2GB PXE Network boot 
Optical DriveCoolingOSMonitor
OEM Slim DVD Burner Scythe Big-Shuriken OpenElec Panasonic TX-P42G30E 42" HDTV 
KeyboardCase
Lenovo n5901a Silverstone SG-05 
  hide details  
Reply
Footrest
(17 items)
 
server
(17 items)
 
HTPC
(12 items)
 
CPUMotherboardGraphicsRAM
2 x Xeon L5520 Supermicro X8DTL-i HD4550 Samsung 6x4GB ECC 
Hard DriveHard DriveCoolingOS
3 x 2TB WD Green 160GB WD Blue Hyper 212+ and EVO ESXi 
OSOSOSPower
unRaid pfSense Ubuntu CX430v2 
CaseOtherOther
CM Elite 331 TP-Link TG-3269 Sil3512 Sata controller 
CPUMotherboardRAMHard Drive
i3-2100T Asus P8H61-I Geil Black Dragon 1333 2x2GB PXE Network boot 
Optical DriveCoolingOSMonitor
OEM Slim DVD Burner Scythe Big-Shuriken OpenElec Panasonic TX-P42G30E 42" HDTV 
KeyboardCase
Lenovo n5901a Silverstone SG-05 
  hide details  
Reply
post #5 of 5
Thread Starter 
The interesting stuff I see in smart are the following:
Code:
ATTRIBUTE    NEW_VAL    OLD_VAL    FAILURE_THRESHOLD    STATUS    RAW_VALUE
Raw_Read_Error_Rate =    114    109    6    ok    82110514
Spin_Retry_Count =    100    100    97    near_thresh    0
End-to-End_Error =    100    100    99    near_thresh    0
Reallocated_Sector_Count =    100    100    36    ok    0

Also here is the full smart report of the disk, I'm quite unfamiliar with smart data so if you could shed some light if everything looks to be in order or not would be really appreciated. SMART Report (Click to show)
Code:
smartctl 5.40 2010-10-16 r3189 [i486-slackware-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Barracuda 7200.12 family
Device Model:     ST31000528AS
Serial Number:    9VP3NN1C
Firmware Version: CC38
User Capacity:    1,000,204,886,016 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 4
Local Time is:    Sun Apr  7 15:14:32 2013 PDT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever 
                                        been run.
Total time to complete Offline 
data collection:                 ( 592) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine 
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        ( 169) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x103f) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   114   099   006    Pre-fail  Always       -       82110514
  3 Spin_Up_Time            0x0003   094   092   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   096   096   020    Old_age   Always       -       4780
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000f   084   060   030    Pre-fail  Always       -       264761930
  9 Power_On_Hours          0x0032   086   086   000    Old_age   Always       -       12359
 10 Spin_Retry_Count        0x0013   100   100   097    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   098   098   020    Old_age   Always       -       2335
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0032   100   100   099    Old_age   Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
188 Command_Timeout         0x0032   100   096   000    Old_age   Always       -       73017983634
189 High_Fly_Writes         0x003a   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   068   051   045    Old_age   Always       -       32 (Min/Max 31/32)
194 Temperature_Celsius     0x0022   032   049   000    Old_age   Always       -       32 (0 16 0 0)
195 Hardware_ECC_Recovered  0x001a   044   024   000    Old_age   Always       -       82110514
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
240 Head_Flying_Hours       0x0000   100   253   000    Old_age   Offline      -       11768210409306
241 Total_LBAs_Written      0x0000   100   253   000    Old_age   Offline      -       345071104
242 Total_LBAs_Read         0x0000   100   253   000    Old_age   Offline      -       3012990695

General Purpose Logging (GPL) feature set supported
General Purpose Log Directory Version 1
SMART           Log Directory Version 1 [multi-sector log support]
GP/S  Log at address 0x00 has    1 sectors [Log Directory]
GP/S  Log at address 0x01 has    1 sectors [Summary SMART error log]
GP/S  Log at address 0x02 has    5 sectors [Comprehensive SMART error log]
GP    Log at address 0x03 has    5 sectors [Ext. Comprehensive SMART error log]
GP/S  Log at address 0x06 has    1 sectors [SMART self-test log]
GP    Log at address 0x07 has    1 sectors [Extended self-test log]
GP/S  Log at address 0x09 has    1 sectors [Selective self-test log]
GP    Log at address 0x10 has    1 sectors [NCQ Command Error]
GP    Log at address 0x11 has    1 sectors [SATA Phy Event Counters]
GP    Log at address 0x21 has    1 sectors [Write stream error log]
GP    Log at address 0x22 has    1 sectors [Read stream error log]
GP/S  Log at address 0x80 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x81 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x82 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x83 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x84 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x85 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x86 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x87 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x88 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x89 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8a has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8b has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8c has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8d has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8e has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x8f has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x90 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x91 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x92 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x93 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x94 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x95 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x96 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x97 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x98 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x99 has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9a has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9b has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9c has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9d has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9e has   16 sectors [Host vendor specific log]
GP/S  Log at address 0x9f has   16 sectors [Host vendor specific log]
GP/S  Log at address 0xa1 has   20 sectors [Device vendor specific log]
GP    Log at address 0xa2 has 2248 sectors [Device vendor specific log]
GP/S  Log at address 0xa8 has  129 sectors [Device vendor specific log]
GP/S  Log at address 0xa9 has    1 sectors [Device vendor specific log]
GP    Log at address 0xb0 has 2928 sectors [Device vendor specific log]
GP    Log at address 0xbd has  252 sectors [Device vendor specific log]
GP    Log at address 0xbe has 65535 sectors [Device vendor specific log]
GP    Log at address 0xbf has 65535 sectors [Device vendor specific log]
GP/S  Log at address 0xc0 has    1 sectors [Device vendor specific log]
GP/S  Log at address 0xe0 has    1 sectors [SCT Command/Status]
GP/S  Log at address 0xe1 has    1 sectors [SCT Data Transfer]

SMART Extended Comprehensive Error Log Version: 1 (5 sectors)
No Errors Logged

SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

SCT Status Version:                  3
SCT Version (vendor specific):       522 (0x020a)
SCT Support Level:                   1
Device State:                        Active (0)
Current Temperature:                    32 Celsius
Power Cycle Min/Max Temperature:     31/32 Celsius
Lifetime    Min/Max Temperature:     16/49 Celsius
Under/Over Temperature Limit Count:   0/0
SCT Temperature History Version:     2
Temperature Sampling Period:         1 minute
Temperature Logging Interval:        59 minutes
Min/Max recommended Temperature:     14/55 Celsius
Min/Max Temperature Limit:           10/60 Celsius
Temperature History Size (Index):    128 (127)

Index    Estimated Time   Temperature Celsius
   0    2013-04-02 09:49    35  ****************
   1    2013-04-02 10:48    35  ****************
   2    2013-04-02 11:47    36  *****************
   3    2013-04-02 12:46    35  ****************
 ...    ..(  2 skipped).    ..  ****************
   6    2013-04-02 15:43    35  ****************
   7    2013-04-02 16:42    34  ***************
 ...    ..(  4 skipped).    ..  ***************
  12    2013-04-02 21:37    34  ***************
  13    2013-04-02 22:36    35  ****************
  14    2013-04-02 23:35    36  *****************
  15    2013-04-03 00:34    36  *****************
  16    2013-04-03 01:33    35  ****************
  17    2013-04-03 02:32    36  *****************
  18    2013-04-03 03:31    34  ***************
  19    2013-04-03 04:30    34  ***************
  20    2013-04-03 05:29    33  **************
  21    2013-04-03 06:28    34  ***************
  22    2013-04-03 07:27    37  ******************
  23    2013-04-03 08:26    38  *******************
  24    2013-04-03 09:25    34  ***************
  25    2013-04-03 10:24    33  **************
  26    2013-04-03 11:23    34  ***************
  27    2013-04-03 12:22    35  ****************
  28    2013-04-03 13:21    36  *****************
  29    2013-04-03 14:20    36  *****************
  30    2013-04-03 15:19    36  *****************
  31    2013-04-03 16:18     ?  -
  32    2013-04-03 17:17    22  ***
  33    2013-04-03 18:16    22  ***
  34    2013-04-03 19:15     ?  -
  35    2013-04-03 20:14    22  ***
  36    2013-04-03 21:13    22  ***
  37    2013-04-03 22:12    34  ***************
  38    2013-04-03 23:11    34  ***************
  39    2013-04-04 00:10    36  *****************
  40    2013-04-04 01:09    37  ******************
  41    2013-04-04 02:08     ?  -
  42    2013-04-04 03:07    23  ****
  43    2013-04-04 04:06    23  ****
  44    2013-04-04 05:05    34  ***************
  45    2013-04-04 06:04    35  ****************
  46    2013-04-04 07:03    35  ****************
  47    2013-04-04 08:02    35  ****************
  48    2013-04-04 09:01    36  *****************
  49    2013-04-04 10:00    35  ****************
  50    2013-04-04 10:59    34  ***************
  51    2013-04-04 11:58    33  **************
  52    2013-04-04 12:57     ?  -
  53    2013-04-04 13:56    24  *****
  54    2013-04-04 14:55     ?  -
  55    2013-04-04 15:54    25  ******
  56    2013-04-04 16:53     ?  -
  57    2013-04-04 17:52    30  ***********
  58    2013-04-04 18:51     ?  -
  59    2013-04-04 19:50    30  ***********
  60    2013-04-04 20:49     ?  -
  61    2013-04-04 21:48    31  ************
  62    2013-04-04 22:47     ?  -
  63    2013-04-04 23:46    31  ************
  64    2013-04-05 00:45     ?  -
  65    2013-04-05 01:44    32  *************
  66    2013-04-05 02:43    32  *************
  67    2013-04-05 03:42    34  ***************
  68    2013-04-05 04:41    34  ***************
  69    2013-04-05 05:40     ?  -
  70    2013-04-05 06:39    32  *************
  71    2013-04-05 07:38    32  *************
  72    2013-04-05 08:37    33  **************
  73    2013-04-05 09:36    32  *************
  74    2013-04-05 10:35    32  *************
  75    2013-04-05 11:34    33  **************
  76    2013-04-05 12:33    33  **************
  77    2013-04-05 13:32    34  ***************
  78    2013-04-05 14:31    34  ***************
  79    2013-04-05 15:30    32  *************
  80    2013-04-05 16:29    33  **************
  81    2013-04-05 17:28    33  **************
  82    2013-04-05 18:27    32  *************
  83    2013-04-05 19:26    32  *************
  84    2013-04-05 20:25    33  **************
  85    2013-04-05 21:24    34  ***************
  86    2013-04-05 22:23    33  **************
  87    2013-04-05 23:22    32  *************
  88    2013-04-06 00:21    32  *************
  89    2013-04-06 01:20    33  **************
  90    2013-04-06 02:19    34  ***************
 ...    ..(  2 skipped).    ..  ***************
  93    2013-04-06 05:16    34  ***************
  94    2013-04-06 06:15    33  **************
  95    2013-04-06 07:14    33  **************
  96    2013-04-06 08:13    32  *************
  97    2013-04-06 09:12    31  ************
  98    2013-04-06 10:11    31  ************
  99    2013-04-06 11:10    30  ***********
 100    2013-04-06 12:09    31  ************
 101    2013-04-06 13:08    32  *************
 102    2013-04-06 14:07    32  *************
 103    2013-04-06 15:06    33  **************
 104    2013-04-06 16:05    34  ***************
 105    2013-04-06 17:04    32  *************
 ...    ..(  2 skipped).    ..  *************
 108    2013-04-06 20:01    32  *************
 109    2013-04-06 21:00    34  ***************
 110    2013-04-06 21:59    35  ****************
 111    2013-04-06 22:58    36  *****************
 112    2013-04-06 23:57    37  ******************
 113    2013-04-07 00:56    36  *****************
 114    2013-04-07 01:55    36  *****************
 115    2013-04-07 02:54    36  *****************
 116    2013-04-07 03:53    37  ******************
 117    2013-04-07 04:52    36  *****************
 118    2013-04-07 05:51    34  ***************
 119    2013-04-07 06:50    36  *****************
 120    2013-04-07 07:49    38  *******************
 121    2013-04-07 08:48    35  ****************
 122    2013-04-07 09:47    35  ****************
 123    2013-04-07 10:46    34  ***************
 124    2013-04-07 11:45    34  ***************
 125    2013-04-07 12:44     ?  -
 126    2013-04-07 13:43    31  ************
 127    2013-04-07 14:42    31  ************

SCT Error Recovery Control:
           Read: Disabled
          Write: Disabled

SATA Phy Event Counters (GP Log 0x11)
ID      Size     Value  Description
0x000a  2            5  Device-to-host register FISes sent due to a COMRESET
0x0001  2            0  Command failed due to ICRC error
0x0003  2            0  R_ERR response for device-to-host data FIS
0x0004  2            0  R_ERR response for host-to-device data FIS
0x0006  2            0  R_ERR response for device-to-host non-data FIS
0x0007  2            0  R_ERR response for host-to-device non-data FIS


Also the disk survived 5 cycles of reading the whole disk then filling the whole disk with 0s then reading it again, so I'm quite confident it's okay.
Footrest
(17 items)
 
server
(17 items)
 
HTPC
(12 items)
 
CPUMotherboardGraphicsRAM
2 x Xeon L5520 Supermicro X8DTL-i HD4550 Samsung 6x4GB ECC 
Hard DriveHard DriveCoolingOS
3 x 2TB WD Green 160GB WD Blue Hyper 212+ and EVO ESXi 
OSOSOSPower
unRaid pfSense Ubuntu CX430v2 
CaseOtherOther
CM Elite 331 TP-Link TG-3269 Sil3512 Sata controller 
CPUMotherboardRAMHard Drive
i3-2100T Asus P8H61-I Geil Black Dragon 1333 2x2GB PXE Network boot 
Optical DriveCoolingOSMonitor
OEM Slim DVD Burner Scythe Big-Shuriken OpenElec Panasonic TX-P42G30E 42" HDTV 
KeyboardCase
Lenovo n5901a Silverstone SG-05 
  hide details  
Reply
Footrest
(17 items)
 
server
(17 items)
 
HTPC
(12 items)
 
CPUMotherboardGraphicsRAM
2 x Xeon L5520 Supermicro X8DTL-i HD4550 Samsung 6x4GB ECC 
Hard DriveHard DriveCoolingOS
3 x 2TB WD Green 160GB WD Blue Hyper 212+ and EVO ESXi 
OSOSOSPower
unRaid pfSense Ubuntu CX430v2 
CaseOtherOther
CM Elite 331 TP-Link TG-3269 Sil3512 Sata controller 
CPUMotherboardRAMHard Drive
i3-2100T Asus P8H61-I Geil Black Dragon 1333 2x2GB PXE Network boot 
Optical DriveCoolingOSMonitor
OEM Slim DVD Burner Scythe Big-Shuriken OpenElec Panasonic TX-P42G30E 42" HDTV 
KeyboardCase
Lenovo n5901a Silverstone SG-05 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Hard Drives & Storage
Overclock.net › Forums › Components › Hard Drives & Storage › Dropped hard drive seems to be working but I'm not sure