Originally Posted by taafe
Originally Posted by Xinoxide
I cant really find any kind of info where someone has shared their findings with this kit.
I suggest you start bumping the clockspeed until it crashes, and then trying to add voltage and see what you come up with on your own.
Just turn up the memory multiplier in bios and stress with prime95 and 90~% memory usage after every bump to see if its working okay.
The current voltage is set to 1.5v what's the maximum I should go? How do I keep an eye on ram temp etc
tbh, I have never seen memory limited much by heat.
I would say just to keep the memory voltage under 1.65 to keep them safe. A little over probably wont hurt them.
My sticks are 1.35 stock and I have taken them as high as 1.9 just for giggles.
go as high as you can without going over 1.65, if you get the hang of the process you can take it further to see what you can get.
Until you are comfortable I would stick to 1.65 max.
That doesn't mean go set 1.65 and start trying multipliers, that's backwards.