Originally Posted by Gilgam3sh
I just took a picture when I used a black screensaver to see how the backlight bleed looks like after the tape mod, I used 2 layer tape (maybe should have used more) but do you think its ok or should I open it up again and put on some more tape??
If tape isn't doing the trick, it might be the case of something pressing on the panel. Try the screensaver again but with the front bezel off, and use your nails or something to lift the metal frame away from the panel. If the bleed goes away, you gotta find a way to loosen the metal clips clamping the frame to the panel.
On my own monitor, I had to bend the frame a bit on certain spots along with bending the metal clips so they aren't so tight. Anything to stop the frame from pressing down on the panel once its put back on.
In other news, my Second Qnix arrived. This one turned out much better than the first having no bleed, but I have to raise the panel a tiny bit. I couldn't beat the pixel gods though, finding 2 stuck/dead pixels again. This time they're light blue and can only be seen on black backgrounds. I tried those pixel fixing videos but no luck Edited by Cwinston - 5/18/13 at 5:29pm