Originally Posted by Sader0
thanks for advise - thought hdmi - dvi-d was not possible in our case.
Can you point to the adapter used & working with QX2710 ?
turns out theres no active adapters that can do this resolution unless they are for DP
this thread will help you alot
heres a good example of TN vs IPS/PLS side-by-side. both are at an angle so you can see viewing angles
the left monitor is a alienware (dell) aw2310 TN 120hz 3d panel. horrible color accuracy, horrible BL glow, dim, thick AG coating but super fast!
right monitor qnix qx2710 IPS set to 96hz , color accurate, bl glow just a tad, no AG coating, super smooth!
my panel developed a small amount of BL bleed at the top from settling on my desk. So I did an old trick that i learned on the AVS forums for my tv.
take a terry cloth towel, dampen it just a bit. with the screen off applying light pressure to the screen wipe vertically while supporting the back of the case with your other hand. turn on the monitor and check to see if it helped. at this point my bl bleed was almost gone. so with the monitor on i did the same thing very carefully as to not disturb the liquid too much and was able to massage out all of my BL bleed as seen above Edited by robb41488 - 3/27/15 at 5:44am