Warning!! This post is not mobile browser friendly. Optimal viewing of the information contained via "desktop" browsing
NEW MEMBERS:
PLEASE READ THE FAQ!!
Many of your questions can be answered here, rather than being asked about again and again in the thread only to be referred back to here, the Original Post (OP).
10/27/14: Updated info on OCing True10 monitors. Added info on how to OC monitor on Mac OSx
10/19/14: Added design request on OP, also added first-time buyers tips. Added new header graphic!
8/19/14: Added info on Nvidia 780ti overclock patching. Thanks BGKris for letting me know.
7/14/14: General updating
7/12/14: Added info about the 10-bit panel models to FAQ.
5/21/14: Dusting off cobwebs. Updated Nvidia OC instructions. Added "color sustainer" to color profiles.
- - - - Added warning that multi-input monitors dont game well.
2/8/2014: Added some ICC profiles
12/26/13: Updated manufacturer websites. Updated FAQ.
9/12/13: Added data sheet for internal Samsung screen in "Relevant discussion and information links"
9/9/13: OP back to normal and added to vesa stand section
8/26/13: Updated verifying monitor OCs. Updated Tape Mod section.
8/19/13: Updated monitor OC procedure.
7/28/13: Added to FAQ.
7/22/13: Added Tek-Syndicate review.
7/12/13: Added a (futile) attempt to get new members to actually read the OP.
7/3/13: Added info to the "Tape Mod" section. Updated FAQ and OP layout.
6/28/13: Added vesa mounting de-bezeled monitor section
6/25/13: Finished verifying all members. All legit!
6/6/13: Added members list photo verification
5/28/13: Added "Official" status, mod De-Zant approved.
5/31/13: Added to reviews section. Added members list analysis section.
5/26-27/13: Added to FAQ section
5/15/13: Added to 'Reviews' section
5/8/13: Added color calibration profiles for monitors with same PLS screen (Asus, Samsung, and Viewsonic).
5/4/13: Added change log. Added Tape Mod in help section. Added some FAQ points.
5/3/13: Added additional color calibration profiles.
4/27/13: Added FAQ section.
4/22/2013: Club founded, thread started. Compiled information into OP.
10/19/14: Added design request on OP, also added first-time buyers tips. Added new header graphic!
8/19/14: Added info on Nvidia 780ti overclock patching. Thanks BGKris for letting me know.
7/14/14: General updating
7/12/14: Added info about the 10-bit panel models to FAQ.
5/21/14: Dusting off cobwebs. Updated Nvidia OC instructions. Added "color sustainer" to color profiles.
- - - - Added warning that multi-input monitors dont game well.
2/8/2014: Added some ICC profiles
12/26/13: Updated manufacturer websites. Updated FAQ.
9/12/13: Added data sheet for internal Samsung screen in "Relevant discussion and information links"
9/9/13: OP back to normal and added to vesa stand section
8/26/13: Updated verifying monitor OCs. Updated Tape Mod section.
8/19/13: Updated monitor OC procedure.
7/28/13: Added to FAQ.
7/22/13: Added Tek-Syndicate review.
7/12/13: Added a (futile) attempt to get new members to actually read the OP.
7/3/13: Added info to the "Tape Mod" section. Updated FAQ and OP layout.
6/28/13: Added vesa mounting de-bezeled monitor section
6/25/13: Finished verifying all members. All legit!
6/6/13: Added members list photo verification
5/28/13: Added "Official" status, mod De-Zant approved.
5/31/13: Added to reviews section. Added members list analysis section.
5/26-27/13: Added to FAQ section
5/15/13: Added to 'Reviews' section
5/8/13: Added color calibration profiles for monitors with same PLS screen (Asus, Samsung, and Viewsonic).
5/4/13: Added change log. Added Tape Mod in help section. Added some FAQ points.
5/3/13: Added additional color calibration profiles.
4/27/13: Added FAQ section.
4/22/2013: Club founded, thread started. Compiled information into OP.
Monitor Information
ALL Multi-input / True10 models WON'T OVERCLOCK
Added on 10-27-14: Some have reported that the newer True10 monitors can OC to roughly 85 Hz. YMMV
PLEASE check out this post [CLICK] for some solid suggestions on what to look out for and avoid if buying a PLS monitor. This dedicated PLS Club Member tries to do periodic updates as to what is good, what is bad.
Added on 10-27-14: Some have reported that the newer True10 monitors can OC to roughly 85 Hz. YMMV
PLEASE check out this post [CLICK] for some solid suggestions on what to look out for and avoid if buying a PLS monitor. This dedicated PLS Club Member tries to do periodic updates as to what is good, what is bad.
Q: Why Korean PLS monitors? What is different about them?
A: Here is some back story: IPS Korean monitors have been around for awhile now, but with increasing popularity their prices have risen. Overclocking variants cost even more.
Out of this comes new Korean variants using the Samsung PLS screen, specifically the Qnix and the X-star, which offer the same (if not better) image quality of the popular IPS and have a very good chance of overclocking to 120 Hz.
Q: Is it worth it to buy a pixel perfect monitor?
A: No. All evidence as of now suggests that probability of receiving a monitor with no or little dead pixels is random, even if purchasing a 'pixel perfect' monitor. It seems that it is a marketing ploy for them to get more money.
Q: Does the single-input version of these monitors overclock?
A: Yes. To see the various overclocks (OCs) reported, look to the expandable section below titled "Members List Form Submission Trends, Analysis" and look for the pie graph of reported OCs.
Q: Does the multi-input model of these monitors overclock?
A: No. Even connecting the multi-input monitor via dual-link DVI will not result in it being able to overclock.
Q: Is the multi-input model of these monitors good for gaming?
A: No. They have "two frames of input lag" and thus are very bad for gaming.
Q: Does the TRUE10 model (10-bit panel) overclock? How is the input-lag?
A: No it does not overclock (regardless of what they try and tell you, for the time being). Added on 10-27-14: Some have reported that the newer True10 monitors can OC to roughly 85 Hz. YMMV
Input lag is worse than on the 8-bit panel version. DO NOT get this if you are trying to game. These are graphic design specific panels, and you probably need a 10-bit specific graphics card to even make use of the 10-bit color depth.
Q: If you can overclock in the computer to 120 Hz, does the monitor truly run at 120 Hz?
A: Yes. Proof: http://www.overclock.net/t/1374065/korean-qnix-qx2710-evolution-ll-27-2560x1440-matte-samsung-pls-panel/530#post_19788281
Q: Can I buy a monitor that will OC to 120 Hz, guaranteed?
A: No, not as far as I know. There are theories that monitors sold by certain sellers have a better chance to OC higher, but it is considered to be random.
Q: Does the DVI cable used have an effect on OC ability?
A: Some have reported better and worse OCs from using a different cable than that included. Some have also reported varrying OCs with switching their GPU. YMMV
Q: Do any issues come from overclocking, i.e. does it affect reliability?
A: Unknown at this time. However, other korean monitors have been overclocked for years with no issues.
Q: Should I buy an X-star or a Qnix (Any differences? Which one will overclock better?)
A: Short answer: Choose whichever one you want.
Long answer: They have the same screen, (both samsung PLS), and look almost identical other than their logo. Neither one has been proven to be clearly better, at this time. The general consensus is believed that they have the same random OC-ability.
Q: Should I buy a matte or glossy monitor?
A: Glossy is superior for image clarity (clarity = sharpness of image. not 'quality' or 'color' of image). The Matte coating on these monitors is semi-Glossy, not a thick Matte coating so it isn't as obtrusive as traditional matte coating. So, choosing Matte or Glossy comes down to if you will be bothered by reflections. If there is a potential for daylight or electrical light reflection, do not get Glossy.
Q: Can i remove the stock stand (base and stem) and mount the monitor?
A: Yes. Both the qnix and x-star have 100mm vesa mount pattern, so mounting is possible. Removing the base is easy (unscrew the thumb screw on the bottom), but removing the clear stem requires opening the monitor casing and unscrewing it. There are multiple videos and pictures below in the "Monitor fixes, support, help" area describing how to open the monitor casing. Once the monitor casing is opened, it is easy to see how to unscrew the screws holding in the base stem.
Q: Will I be able to notice the response time and/or input lag (especially in gaming)?
A: Many users, myself included, have noticed motion blur during FPS gaming (such as planetside 2). It would be even more noticeable in 'twitch' gaming. It is fine for regular use (Leauge of Legends, Guildwars 2, etc.), but gaming professionals should look elsewhere.
Q: Is the panel 6 or 8 bit?
A: Panel is 8 bit.
Q: Differences between IPS and PLS? (why is one better than the other, if that?)
A: IPS is made by LG and PLS is made by Samsung. They are both pretty much the same thing, but technically PLS is better.
Q: I don't live in the U.S.. How much will I have to pay in additional shipping fees, VAT, taxes, etc.?
A: Look at the expandable section below titled "VAT, Fees, Taxes by Country"
Q: Does my monitor have any dead pixels or back light bleed?
A: Here is a good website to check. Choose a color and make it full screen to check dead/stuck pixels. For checking back light bleed, choose the black and make it full screen. Make your surroundings as dark as possible with no lights or daylight.
Q: Oh noe, I received a monitor and it has back light bleed (BLB)!! How will I know if it is worthy of getting a return over?
A: Some ebay sellers straight up say that BLB is not something they take returns over. There have been exceptions, however. So take pictures of the monitor in the best standardized way to show BLB. Refer to the "Monitor Fixes, Support, Help" section below for the subsection titled "How to properly take pictures of your backlight bleed" to learn how to take pictures of the BLB, and post them here on this forum.
Q: Is there a way to fix back light bleed (BLB)?
A: Possibly, to some degree. Look below in the expandable section titled "Tape mod to fix Back Light Bleed"
Q: What GPU should I have to support the resolution of this monitor?
A: For non-gaming, anything is fine as long as it has the DVI-D port. For gaming, a card with 2GB GDDR5 is recommended and anything above that is great. Below 2GB will work, just not the best for modern games.
A: Here is some back story: IPS Korean monitors have been around for awhile now, but with increasing popularity their prices have risen. Overclocking variants cost even more.
Out of this comes new Korean variants using the Samsung PLS screen, specifically the Qnix and the X-star, which offer the same (if not better) image quality of the popular IPS and have a very good chance of overclocking to 120 Hz.
Q: Is it worth it to buy a pixel perfect monitor?
A: No. All evidence as of now suggests that probability of receiving a monitor with no or little dead pixels is random, even if purchasing a 'pixel perfect' monitor. It seems that it is a marketing ploy for them to get more money.
Q: Does the single-input version of these monitors overclock?
A: Yes. To see the various overclocks (OCs) reported, look to the expandable section below titled "Members List Form Submission Trends, Analysis" and look for the pie graph of reported OCs.
Q: Does the multi-input model of these monitors overclock?
A: No. Even connecting the multi-input monitor via dual-link DVI will not result in it being able to overclock.
Q: Is the multi-input model of these monitors good for gaming?
A: No. They have "two frames of input lag" and thus are very bad for gaming.
Q: Does the TRUE10 model (10-bit panel) overclock? How is the input-lag?
A: No it does not overclock (regardless of what they try and tell you, for the time being). Added on 10-27-14: Some have reported that the newer True10 monitors can OC to roughly 85 Hz. YMMV
Input lag is worse than on the 8-bit panel version. DO NOT get this if you are trying to game. These are graphic design specific panels, and you probably need a 10-bit specific graphics card to even make use of the 10-bit color depth.
Q: If you can overclock in the computer to 120 Hz, does the monitor truly run at 120 Hz?
A: Yes. Proof: http://www.overclock.net/t/1374065/korean-qnix-qx2710-evolution-ll-27-2560x1440-matte-samsung-pls-panel/530#post_19788281
Q: Can I buy a monitor that will OC to 120 Hz, guaranteed?
A: No, not as far as I know. There are theories that monitors sold by certain sellers have a better chance to OC higher, but it is considered to be random.
Q: Does the DVI cable used have an effect on OC ability?
A: Some have reported better and worse OCs from using a different cable than that included. Some have also reported varrying OCs with switching their GPU. YMMV
Q: Do any issues come from overclocking, i.e. does it affect reliability?
A: Unknown at this time. However, other korean monitors have been overclocked for years with no issues.
Q: Should I buy an X-star or a Qnix (Any differences? Which one will overclock better?)
A: Short answer: Choose whichever one you want.
Long answer: They have the same screen, (both samsung PLS), and look almost identical other than their logo. Neither one has been proven to be clearly better, at this time. The general consensus is believed that they have the same random OC-ability.
Q: Should I buy a matte or glossy monitor?
A: Glossy is superior for image clarity (clarity = sharpness of image. not 'quality' or 'color' of image). The Matte coating on these monitors is semi-Glossy, not a thick Matte coating so it isn't as obtrusive as traditional matte coating. So, choosing Matte or Glossy comes down to if you will be bothered by reflections. If there is a potential for daylight or electrical light reflection, do not get Glossy.
Q: Can i remove the stock stand (base and stem) and mount the monitor?
A: Yes. Both the qnix and x-star have 100mm vesa mount pattern, so mounting is possible. Removing the base is easy (unscrew the thumb screw on the bottom), but removing the clear stem requires opening the monitor casing and unscrewing it. There are multiple videos and pictures below in the "Monitor fixes, support, help" area describing how to open the monitor casing. Once the monitor casing is opened, it is easy to see how to unscrew the screws holding in the base stem.
Q: Will I be able to notice the response time and/or input lag (especially in gaming)?
A: Many users, myself included, have noticed motion blur during FPS gaming (such as planetside 2). It would be even more noticeable in 'twitch' gaming. It is fine for regular use (Leauge of Legends, Guildwars 2, etc.), but gaming professionals should look elsewhere.
Q: Is the panel 6 or 8 bit?
A: Panel is 8 bit.
Q: Differences between IPS and PLS? (why is one better than the other, if that?)
A: IPS is made by LG and PLS is made by Samsung. They are both pretty much the same thing, but technically PLS is better.
Q: I don't live in the U.S.. How much will I have to pay in additional shipping fees, VAT, taxes, etc.?
A: Look at the expandable section below titled "VAT, Fees, Taxes by Country"
Q: Does my monitor have any dead pixels or back light bleed?
A: Here is a good website to check. Choose a color and make it full screen to check dead/stuck pixels. For checking back light bleed, choose the black and make it full screen. Make your surroundings as dark as possible with no lights or daylight.
Q: Oh noe, I received a monitor and it has back light bleed (BLB)!! How will I know if it is worthy of getting a return over?
A: Some ebay sellers straight up say that BLB is not something they take returns over. There have been exceptions, however. So take pictures of the monitor in the best standardized way to show BLB. Refer to the "Monitor Fixes, Support, Help" section below for the subsection titled "How to properly take pictures of your backlight bleed" to learn how to take pictures of the BLB, and post them here on this forum.
Q: Is there a way to fix back light bleed (BLB)?
A: Possibly, to some degree. Look below in the expandable section titled "Tape mod to fix Back Light Bleed"
Q: What GPU should I have to support the resolution of this monitor?
A: For non-gaming, anything is fine as long as it has the DVI-D port. For gaming, a card with 2GB GDDR5 is recommended and anything above that is great. Below 2GB will work, just not the best for modern games.
Quote:
http://minus.com/lhBLUNzitIRnG
They included a USA adapter.
http://minus.com/luEymcdwGGEdq
Comes come with a DVI-DL cable. It's not very long. Also comes with plug, so find an old PC PSU cable.
http://minus.com/lhBLUNzitIRnG
They included a USA adapter.
http://minus.com/luEymcdwGGEdq
Quote:
"NCX" at wecravegamestoo.com Qnix QX2710 full review
Not entirely accurate throughout the video, but they still recommend it over the ACHIEVA Shimian.
Overclockers.ru Review (in Russian ---> translate)
"mspamed's" impressions on the X-star DP2710
"MrGreenankle's" X-star DP2710 impressions/URL]
"rune3400's" Qnix QX2700 impressions
"HyperMatrix" (at 120Hz.net) impressions
Review of a similar monitor, but with an IPS screen. It contains good pictures of the monitor, and inside the monitor.
Not entirely accurate throughout the video, but they still recommend it over the ACHIEVA Shimian.
Overclockers.ru Review (in Russian ---> translate)
"mspamed's" impressions on the X-star DP2710
"MrGreenankle's" X-star DP2710 impressions/URL]
"rune3400's" Qnix QX2700 impressions
"HyperMatrix" (at 120Hz.net) impressions
Review of a similar monitor, but with an IPS screen. It contains good pictures of the monitor, and inside the monitor.
Monitor Fixes, Support, Help
Some analysis on the members list submissions, done by yours truly
These should not be a persons ONLY source in buying advice. If unsure, ask us about a seller or specific listing.
This is simply to show trends in what members here have purchased thus far. Enjoy
These should not be a persons ONLY source in buying advice. If unsure, ask us about a seller or specific listing.
This is simply to show trends in what members here have purchased thus far. Enjoy
My QNIX from hulustar had this play within the monitor case, once I knew about it I had to fix it. Also, my screen sat too low in the monitor case and cut off the image a little.
Quote:
I followed the post above and its image to open up the monitor case.
After following this, you will see that the front portion of the monitor casing (the bezel) comes off. From this point, the screen isn't removable since it is attached to the metal frames on each side with 2 screws per side. Unscrew those 2 screws and the screen is now able to move around, with the monitor connections still connected. Be careful!
Found this inside. A Samsung PLS panel, that confirms that.
The metal frame that holds the monitor in place rests inside the bottom of the monitor case, as circled in red. To solve my image being cut off on the bottom, I wanted to add something here as a spacer.
Another view of where the metal frame rests on. This is the bottom of the monitor case.
Decided to use electrical tape as a spacer. Added 3 layers of electrical tape on the 4 raised circle areas that go up each side of the monitor case edge where the metal frame rests on. You can slightly still see the raised circular areas underneath the tape. This solves the 'play' that the monitor screen has within the monitor case, and also pushes the screen closer towards the bezel and closes that ugly gap.
A close up of the above image. The bottom-most red circle on this image is where the metal screen frame rests on. This is where I also added some pieces of electrical tape so the screen would sit higher in the monitor casing. Now, my screen image doesn't getting cut off anymore.
The results. Perfectly centered image and no screen panel rocking back and forth internally
Comprehensive video playlist showing how to do the dismantle the monitor and do the Tape Mod . This starts on video 1 of 17. To streamline the process, it is suggested to watch videos 1-5, skip 6-10, watch 11-13. Assembly is in the reverse order.
Quote:
Quote:
*Current club signup form crashed due to so many signups!*
Club signature code
Code:
Code:
[CENTER]:clock: [B][URL=http://www.overclock.net/t/1384767/the-korean-2560x1440-pls-monitor-club] The Korean PLS Monitor Club[/URL][/B] :clock:[/CENTER]