Overclock.net › Forums › Cooling › Air Cooling › [Guide] Budget, Mid range and High end Heatsink choice Price/Performance
New Posts  All Forums:Forum Nav:

[Guide] Budget, Mid range and High end Heatsink choice Price/Performance - Page 10

post #91 of 133
Quote:
Originally Posted by incog View Post

Oh, you mean that you bought the 4670k but you haven't imported it yet? You would like to import the 4670k and the new CPU cooler you're getting at the same time, to reduce shipping costs? Correct?

I've never overclocked Haswell (or anything other than a GPU for that matter), so take what I say with a grain of salt; I'm just repeating what other, more experienced users, have often said in the past. The 212+ won't allow you to get as much out of a 4670k as it's possible. I know that often I've heard often seen the Thermalright Macho Rev. A being recommended though. I believe it's a strong mid range cooler. It also seems to be the least expensive item on that list.

Yes, that's the idea, I'll try to save money (just in case I need to buy a new one), between the Prolimatech Megahalems Blue and Noctua NH-U14S, which is better??

Both cost about the same, are in the order of $70, but aesthetically I prefer the Megahalems...
Edited by jazh23 - 3/4/14 at 6:26am
post #92 of 133
Quote:
Originally Posted by jazh23 View Post

Quote:
Originally Posted by incog View Post

Oh, you mean that you bought the 4670k but you haven't imported it yet? You would like to import the 4670k and the new CPU cooler you're getting at the same time, to reduce shipping costs? Correct?

I've never overclocked Haswell (or anything other than a GPU for that matter), so take what I say with a grain of salt; I'm just repeating what other, more experienced users, have often said in the past. The 212+ won't allow you to get as much out of a 4670k as it's possible. I know that often I've heard often seen the Thermalright Macho Rev. A being recommended though. I believe it's a strong mid range cooler. It also seems to be the least expensive item on that list.

Yes, that's the idea, I'll try to save money (just in case I need to buy a new one), between the Prolimatech Megahalems Blue and Noctua NH-U14S, which is better??

Both cost about the same, are in the order of $70, but aesthetically I prefer the Megahalems...

Unfortunately I can't say. I'd check out some reviews.
post #93 of 133
Understand now.

NH-U14S is better
post #94 of 133
Quote:
Originally Posted by doyll View Post

Understand now.

NH-U14S is better

Thanks, I was hoping they had a similar performance, because the Noctua is very ugly compared to the Megahalems...
post #95 of 133
They are within a couple degrees of each other. Either one will do what you need done.
post #96 of 133
Thread Starter 
Quote:
Originally Posted by Jaydev16 View Post

Hey manwhat do you think of the Deepcool GAMAXX S40?I only found this guide after I bought it but your views are valuable nontheless.

Based on these results
http://www.tweaktown.com/reviews/5514/deepcool-gammax-s40-cpu-cooler-review/index7.html

http://www.pureoverclock.com/Review-detail/deep-cool-gammax-s40-cpu-cooler/5/

that heatsink is 2 to 3 degrees better than the hyper 212plus, so you got a nice heatsink.
Edited by PontiacGTX - 3/4/14 at 6:06pm
post #97 of 133
Thread Starter 
Quote:
Originally Posted by jazh23 View Post

I bought on amazon a 4670K, I would like to do a OC between 4.2 and 4.4GHz, currently I have the Hyper 212+, but I do not know if it is sufficient to cool this processor?

On amazon I still have $56, there is a CPU cooler better than the Hyper 212+ for that price ?

my options are:

1. Thermalright Macho Rev. A (HR-02) = $ 49.90
2. Thermaltake NIC C5 = $ 54.99
3. Enermax ETS-T40-BK = $ 49.98

My question is: there is any improvement with some of them or is waste of money?

Try Delidding your cpu, because it has a bit bad TIM under the DIE and it has a spacing between the TIM and the IHS which doesnt make a good transfer of the heat.

if you dont want to delid, just dont OC too far or get a better cooling like an used corsair h100
Edited by PontiacGTX - 3/4/14 at 6:04pm
post #98 of 133
Thread Starter 
Warning:Offtopic! (Click to show)
Quote:
Originally Posted by DaveLT View Post

His views = valuable? *cough* I think it's a good heatsink if you can get it cheap. Oh and being made with sintered copper heatsinks ensures it is a good performer
Quote:
Originally Posted by doyll View Post

Agree with Dave. tongue.gif
I Appreciate you guys,contrariode to you I dont believe than I am beter than anyone, or that I know more than anyone, just Help when someone need it, if you feel uncomfortable with me then dont be a hater with offtpic comments when someone who wants help,but nonetheless I wish sometime you can feel me as a friend, not as a rival or an anemy as now you do thumb.gif

Edited by PontiacGTX - 3/4/14 at 6:10pm
post #99 of 133
Quote:
Originally Posted by DaveLT View Post

Quote:
Originally Posted by Jaydev16 View Post

Hey manwhat do you think of the Deepcool GAMAXX S40?I only found this guide after I bought it but your views are valuable nontheless.
His views = valuable? *cough*
I think it's a good heatsink if you can get it cheap. Oh and being made with sintered copper heatsinks ensures it is a good performer
Quote:
Originally Posted by doyll View Post

Agree with Dave. tongue.gif

Quote:
Originally Posted by PontiacGTX View Post

Warning:Offtopic! (Click to show)
Quote:
Originally Posted by DaveLT View Post

His views = valuable? *cough* I think it's a good heatsink if you can get it cheap. Oh and being made with sintered copper heatsinks ensures it is a good performer
Quote:
Originally Posted by doyll View Post

Agree with Dave. tongue.gif
I Appreciate you guys,contrariode to you I dont believe than I am beter than anyone, or that I know more than anyone, just Help when someone need it, if you feel uncomfortable with me then dont be a hater with offtpic comments when someone who wants help,but nonetheless I wish sometime you can feel me as a friend, not as a rival or an anemy as now you do thumb.gif
You are quoting out of context . rolleyes.gif
post #100 of 133
Thread Starter 
Quote:
Originally Posted by doyll View Post



You are quoting out of context . rolleyes.gif
excuse me and forgive me if that was the case.Because you didnt say on what you agree
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Air Cooling
Overclock.net › Forums › Cooling › Air Cooling › [Guide] Budget, Mid range and High end Heatsink choice Price/Performance