Overclock.net › Forums › Graphics Cards › AMD/ATI › Eyefinity not workin
New Posts  All Forums:Forum Nav:

Eyefinity not workin

post #1 of 15
Thread Starter 
Heres the card and adapter i got. My screens only take VGA. I have one screen from DVI to VGA another on HDMI and the last one on DP to VGA.

When I create eyefinity it shuts of the two side screens and leaves the hdmi one on. There all set on the same reso and set to landscape.

http://www.newegg.com/Product/Product.aspx?Item=N82E16882203129



http://www.newegg.com/Product/Product.aspx?Item=N82E16814202024
post #2 of 15
Are they all the same monitors? I know 2 different monitors non-eyefinity work fine, not sure about 3x1 eyefinity mode though.
post #3 of 15
Thread Starter 
Yup all 3 are the same.
post #4 of 15
Have you set it up using this tool in CCC?


If so, have you selected a primary display and aranged eyefinity diplay group?

Also check to make sure your monitors didnt go into sleep mode.
post #5 of 15
Thread Starter 
Yes I have done that. How do I select primary display?

Im using 3 of the same tvs. When I make it all one screen the screens go black saying not supported.
post #6 of 15
Thread Starter 
I hooked one up to the other display port and now it send all 3 not to supported black screens
post #7 of 15
I suspect those adapters may not actually be active adapters. If they were, the configuration you've done at the GPU end is correct: DP+DVI+HDMI is a perfectly functional Eyefinity config.
post #8 of 15
need to be active adpaters...
    
CPUMotherboardGraphicsGraphics
i7 920 Evga X58 Classified LE Edition. Sapphire HD 7950 OC Edition Sapphire HD 7950 OC Edition 
RAMHard DriveHard DriveOptical Drive
G skill Ripjaws 12 gb Samsung ssd 120 gb sata III WD Velociraptop 300 gb x 2 LG Blu ray drive 
CoolingCoolingCoolingCooling
EK-FC7950 with EK-7950 Backplate FC8 30 watt per channel Bitspower fittings Feser 360 rad (Push Pull) 
CoolingCoolingCoolingCooling
XSPC 240 rad (Push Pull) Corsair SP 120 mm static x10 Corsair AF 120 mm  Bitspower 250 reservoir 
CoolingCoolingCoolingCooling
Heat killer 3.0 Koolance chipset water block EK-FC7950 with EK-7950 Backplate MCP35X2 with stand 
OSMonitorKeyboardPower
Windows 7 Ultimate Acer 27" x 3 (eyefinity) Logitech G510/CM Storm Mechanical Keyboard Seasonic 1250 watt X series with moddyi Cable set. 
CaseMouseMouse PadAudio
CaseLabs SM8 white ZowieAM Rocketfish Gamecon 780 
Audio
Bose 2.1 
  hide details  
Reply
    
CPUMotherboardGraphicsGraphics
i7 920 Evga X58 Classified LE Edition. Sapphire HD 7950 OC Edition Sapphire HD 7950 OC Edition 
RAMHard DriveHard DriveOptical Drive
G skill Ripjaws 12 gb Samsung ssd 120 gb sata III WD Velociraptop 300 gb x 2 LG Blu ray drive 
CoolingCoolingCoolingCooling
EK-FC7950 with EK-7950 Backplate FC8 30 watt per channel Bitspower fittings Feser 360 rad (Push Pull) 
CoolingCoolingCoolingCooling
XSPC 240 rad (Push Pull) Corsair SP 120 mm static x10 Corsair AF 120 mm  Bitspower 250 reservoir 
CoolingCoolingCoolingCooling
Heat killer 3.0 Koolance chipset water block EK-FC7950 with EK-7950 Backplate MCP35X2 with stand 
OSMonitorKeyboardPower
Windows 7 Ultimate Acer 27" x 3 (eyefinity) Logitech G510/CM Storm Mechanical Keyboard Seasonic 1250 watt X series with moddyi Cable set. 
CaseMouseMouse PadAudio
CaseLabs SM8 white ZowieAM Rocketfish Gamecon 780 
Audio
Bose 2.1 
  hide details  
Reply
post #9 of 15
Thread Starter 
That adpater does say active?
post #10 of 15
It does, yes, but I've seen many adapters mislabeled. It's the only thing I can think of short of a bad adapter or faulty GPU.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD/ATI
Overclock.net › Forums › Graphics Cards › AMD/ATI › Eyefinity not workin