Overclock.net › Forums › Cooling › Water Cooling › Acrylic pipebending 101
New Posts  All Forums:Forum Nav:

Acrylic pipebending 101 - Page 375

post #3741 of 4322
Quote:
Originally Posted by p5ych00n5 View Post

I'm a little confuzzled. I always thought that the outlet from the reservoir had to go into the centre of the pump/pumptop (where your tubing goes to the gpu)

Yes, it does.

This is how you should do it ...



http://www.overclock.net/t/1306241/build-log-the-switched-switch-a-reverse-atx-switch-810/


Quote:
Originally Posted by DarthBaggins View Post

Oh ok, was trying to go by the arrows on the top, lol. Luckily it's easy to swap ports thumb.gif and I haven't filled the loop yet. This is my first time using a D5 pump so all the tips I can get the better. So technically if I've plumbed to both inlets then all I need to move is the line running to the GPU?

Or just rotate your pump top and D5 pump 90 degrees. You MIGHT get lucky and won't have to redo any of the tubing.
Edited by 47 Knucklehead - 5/21/15 at 12:44pm
post #3742 of 4322
Quote:
Originally Posted by Jakusonfire View Post


Has anyone used these yet? I'm wondering if they are easier to work with for 12mm OD acrylic then the Monsoon Mandrel kit. The only place I see them for sale is ModDiy and I haven't had good luck with them.
post #3743 of 4322
With these or the Monsoon kit? mellowsmiley.gif

~Ceadder smil3dbd4e4c2e742.gif
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
post #3744 of 4322
Quote:
Originally Posted by Ceadderman View Post

With these or the Monsoon kit? mellowsmiley.gif

~Ceadder smil3dbd4e4c2e742.gif

I'm wondering if the Barrow kit will work better than the Monsoon Mandrel Kit? The Monsoon will fit the 12mm but it is imperial measurements and leaves some space for a 12mm OD tube to move around. Maybe it would be easier with the Barrow kit as I keep getting indents on some of my tubes from the ends of the Monsoon Mandrels.
post #3745 of 4322
Try not applying pressure at the ends. It'd happen with the ModDYI mandrels as well if you're applying pressure at the wrong points.

~Ceadder smil3dbd4e4c2e742.gif
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
post #3746 of 4322
Quote:
Originally Posted by Ceadderman View Post

Try not applying pressure at the ends. It'd happen with the ModDYI mandrels as well if you're applying pressure at the wrong points.

~Ceadder smil3dbd4e4c2e742.gif

I'm actually getting better, it's just hit and miss with me, I'll get 5 great bends and ruin the sixth. I tried walking the tube around the mandrel and pulling the tube around the top and to the right if that makes sense. tiredsmiley.gif I just thought since these were made especially for the 12mm OD they may improve my luck. thumb.gif
post #3747 of 4322
Quote:
Originally Posted by Ceadderman View Post

Naaawp, think he's right. GPU to CPU looks fine. Center of Supremacy/EVO blocks is sposed to be Intake. Exhaust on the outside. Looks right.

Or maybe I have my wires crossed. Haven't my 1st cuppa joe yet. tiredsmiley.gif

~Ceadder smil3dbd4e4c2e742.gif

Quote:
Originally Posted by guitarhero23 View Post

One of us hasn't. We are talking about the res feeding into the pumptop. Shouldn't it go to the center?

Although I don't know what top he's using so it might be different.

EDIT:(Checked, he's using an Alphacool HF D5 TOP)


Someone's right and someone's wrong, loser gets the cup of Joe! wink.gif


I was just about to post that very same image biggrin.gif

Quote:
Originally Posted by Ceadderman View Post

Sounds good. Don't know the AC pump setup so... tongue.gif

~Ceadder smil3dbd4e4c2e742.gif

Quote:
Originally Posted by guitarhero23 View Post

I can't find a manual for it that says...The installation manual just shows the pump to top assembly, no indication of where the tubes go LOL. Useless.

Quote:
Originally Posted by Ceadderman View Post

Yes it's wrong actually. Now that I have woken up and looked at it longer,the Pump top should either be Square flat side up or the tubes need to be replaced and bent for the correct orientation. Or we'll read... "My loop is finished but there seems to be a problem...".

So yup fellas dead on. Cuz I am pretty certain all that will happen is those lines feed which will go nowhere since the Inlet is covered and flow might actually cause an embolism popping a tube from a fitting from pressure buildup. That's worse case of course. smile.gif

~Ceadder smil3dbd4e4c2e742.gif

Quote:
Originally Posted by B NEGATIVE View Post

The pump top mentioned has been plumbed to both inlets,all center ports are inlet,all offset ports are outlet. Stands true for all tops pretty much,you cant machine curved port runs for obvious reasons....

The top port in the pic needs to move to the offset port.

Quote:
Originally Posted by guitarhero23 View Post

You hear that @DarthBaggins??? Calling @DarthBaggins we are trying to save you unless you know something we dont!

Quote:
Originally Posted by DarthBaggins View Post

Oh ok, was trying to go by the arrows on the top, lol. Luckily it's easy to swap ports thumb.gif and I haven't filled the loop yet. This is my first time using a D5 pump so all the tips I can get the better. So technically if I've plumbed to both inlets then all I need to move is the line running to the GPU?

Quote:
Originally Posted by 47 Knucklehead View Post

Yes, it does.

This is how you should do it ...



http://www.overclock.net/t/1306241/build-log-the-switched-switch-a-reverse-atx-switch-810/
Or just rotate your pump top and D5 pump 90 degrees. You MIGHT get lucky and won't have to redo any of the tubing.

All is good then, I thought I was losing my nuggins wink.gif
The Slug
(31 items)
 
  
CPUMotherboardGraphicsGraphics
AMD K15 CROSSHAIR V FORMULA-Z Sapphire Dual-X OC HD 7970 Sapphire Dual-X OC HD7970 
RAMRAMRAMRAM
Corsair  Corsair  Corsair  Corsair  
Hard DriveCoolingCoolingCooling
OCZ Vertex II SSD Custom Loop Koolance PMP 450 Pump EK D5 Pumptop 
CoolingCoolingCoolingCooling
Monsoon Hardline Fittings Monsoon 16/13 Tubing Distilled Water Silver Kill Coil 
CoolingCoolingCoolingCooling
EK Coolstream XTX 240 Radiator EK Coolstream XTX 240 Radiator Lavish 5.25" Touchscreen Fan Controller Heatkiller Rev 3.0 CPU Block 
CoolingCoolingOSMonitor
Heatkiller X3 GPU Block Heatkiller X3 GPU Block Windows 10 Tech Preview BenQ G2420 
MonitorMonitorKeyboardPower
BenQ E2200HD BenQ G2220 Razer Blackwidow Ultimate Corsair AX 1200 
CaseMouseAudio
Coolermaster HafX Razer Lachesis Onboard 
  hide details  
Reply
The Slug
(31 items)
 
  
CPUMotherboardGraphicsGraphics
AMD K15 CROSSHAIR V FORMULA-Z Sapphire Dual-X OC HD 7970 Sapphire Dual-X OC HD7970 
RAMRAMRAMRAM
Corsair  Corsair  Corsair  Corsair  
Hard DriveCoolingCoolingCooling
OCZ Vertex II SSD Custom Loop Koolance PMP 450 Pump EK D5 Pumptop 
CoolingCoolingCoolingCooling
Monsoon Hardline Fittings Monsoon 16/13 Tubing Distilled Water Silver Kill Coil 
CoolingCoolingCoolingCooling
EK Coolstream XTX 240 Radiator EK Coolstream XTX 240 Radiator Lavish 5.25" Touchscreen Fan Controller Heatkiller Rev 3.0 CPU Block 
CoolingCoolingOSMonitor
Heatkiller X3 GPU Block Heatkiller X3 GPU Block Windows 10 Tech Preview BenQ G2420 
MonitorMonitorKeyboardPower
BenQ E2200HD BenQ G2220 Razer Blackwidow Ultimate Corsair AX 1200 
CaseMouseAudio
Coolermaster HafX Razer Lachesis Onboard 
  hide details  
Reply
post #3748 of 4322
Quote:
Originally Posted by p5ych00n5 View Post


I was just about to post that very same image biggrin.gif






All is good then, I thought I was losing my nuggins wink.gif

Well you might be...you just werent wrong about this. Could still be losing it
post #3749 of 4322
Quote:
Originally Posted by DarthBaggins View Post

Little late posting these in here but got started just have a couple more runs (Big ones) to do and then leak test after filling (plan on leak testing with distilled before I add in the X1 BloodRed)

Quote:
Originally Posted by p5ych00n5 View Post

I'm a little confuzzled. I always thought that the outlet from the reservoir had to go into the centre of the pump/pumptop (where your tubing goes to the gpu)

Quote:
Originally Posted by Ceadderman View Post

Naaawp, think he's right. GPU to CPU looks fine. Center of Supremacy/EVO blocks is sposed to be Intake. Exhaust on the outside. Looks right.

Or maybe I have my wires crossed. Haven't my 1st cuppa joe yet. tiredsmiley.gif

~Ceadder smil3dbd4e4c2e742.gif

Quote:
Originally Posted by guitarhero23 View Post

One of us hasn't. We are talking about the res feeding into the pumptop. Shouldn't it go to the center?

Although I don't know what top he's using so it might be different.

EDIT:(Checked, he's using an Alphacool HF D5 TOP)


Someone's right and someone's wrong, loser gets the cup of Joe! wink.gif


Quote:
Originally Posted by guitarhero23 View Post

You hear that @DarthBaggins??? Calling @DarthBaggins we are trying to save you unless you know something we dont!

Quote:
Originally Posted by DarthBaggins View Post

Oh ok, was trying to go by the arrows on the top, lol. Luckily it's easy to swap ports thumb.gif and I haven't filled the loop yet. This is my first time using a D5 pump so all the tips I can get the better. So technically if I've plumbed to both inlets then all I need to move is the line running to the GPU?

The picture looks fine to me. The Alpahcool top has multiple inlets and outlets. As far as I can tell the res is feeding the top inlet port, and the front outlet port is connected to the GPU. It is just an illusion that it looks like it is set wrong.
EK tops don't have the extra ports.

CREATOR: gd-jpeg v1.0 (using IJG JPEG v62), quality = 100
Edited by Jakusonfire - 5/21/15 at 10:47pm
Kusanagi
(21 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 3570K Asus Sabertooth Z77 EVGA GTX 780 SC Corsair Vengeance Pro CMY16GX3M2A2133C11 16GB 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 256GB X2 EK Supremacy Aqua Computer Aquaero 6 Pro Aqua Computer D5 USB 
CoolingCoolingCoolingCooling
Aquacomputer MPS 400 flow meter EK-CoolStream PE 360 EK-Coolstream PE 240 Noiseblocker Eloop B12-PS 
CoolingCoolingCoolingCooling
EK Vardar F2 EK-FC Titan Acetal & Nickel EK-RAM Monarch X4 Clean CSQ - Acetal+Nickel EK-D5 X-RES 140 CSQ 
OSMonitorMonitorPower
Win 8.1 Pro 64 bit Samsung S27A750d LG E2290V-SN Silverstone Strider Plus 850W ST85F-P 
Case
Corsair Obsidian 750D 
  hide details  
Reply
Kusanagi
(21 items)
 
  
CPUMotherboardGraphicsRAM
Intel Core i5 3570K Asus Sabertooth Z77 EVGA GTX 780 SC Corsair Vengeance Pro CMY16GX3M2A2133C11 16GB 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 256GB X2 EK Supremacy Aqua Computer Aquaero 6 Pro Aqua Computer D5 USB 
CoolingCoolingCoolingCooling
Aquacomputer MPS 400 flow meter EK-CoolStream PE 360 EK-Coolstream PE 240 Noiseblocker Eloop B12-PS 
CoolingCoolingCoolingCooling
EK Vardar F2 EK-FC Titan Acetal & Nickel EK-RAM Monarch X4 Clean CSQ - Acetal+Nickel EK-D5 X-RES 140 CSQ 
OSMonitorMonitorPower
Win 8.1 Pro 64 bit Samsung S27A750d LG E2290V-SN Silverstone Strider Plus 850W ST85F-P 
Case
Corsair Obsidian 750D 
  hide details  
Reply
post #3750 of 4322
Ahhhhhhh okay, I see the stopper now! thumbsupsmiley.png:

~Ceadder smil3dbd4e4c2e742.gif
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
 
CPUMotherboardGraphicsGraphics
AMD Phenom II X6 1100T Crosshair IV Formula Sapphire Radeon HD 6870 Sapphire Radeon HD 6870 
RAMRAMRAMHard Drive
Corsair Dominator G. Skill Ripjaws X G. Skill x2 HITACHI 1TB Deskstars 1TB RAID0 
Optical DriveCoolingCoolingCooling
ASUS DRW-24B1ST  Swiftech 6950/6870 GPU Heatsink Swiftech 6950/6870 GPU Heatsink Monsoon 1/2"x5/8" PETG White Hardline tubing. 
CoolingCoolingCoolingCooling
Monsoon Economy Hardline fittings EK Dual DDC V2 top Swiftech Pump DDC-1T (2) Liquid Fusion V Double helix Reservoir 
CoolingCoolingCoolingCooling
Yate Loon 120x20 (D12SM-12C) Medium Speed Silen... EK Supreme HF Classified EK Thermosphere GPU Block EK Thermosphere GPU Block 
OSMonitorKeyboardPower
Win7 64 bit Ultimate OEM Asus VH222H Black HDMI Widescreen Logitech the OCZ went buhbye adios. Don't know ... Corsair CMPSU HX 850w Modular 
CaseMouseMouse PadAudio
HAF 932 Logitech g9x COOLER MASTER Weapon of Choice: M4 Duramesh Pad Logitech X-240 2.1 speakers 
OtherOther
Sunbeam Rheosmart 3 Creative X-Fi 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Acrylic pipebending 101