Originally Posted by amvnz If you look at this picture
the 360 only just fits in the front. You'd probably have to cut into the bottom of the 5.25" rack or it would probably be so tight that there would be zero clearance (push that bugger in there with force). I'm personally going to put a Alphacool NexXxos Monsta 360 radiator in the front because you could put the thickest radiator you could possibly want in the front.
Actually in the front there is dual 200 mm fans + 5.25 bay can be removed, Back metal part, according to the support, which holds the HDD cages can be removed two.
So...in the front you can put 400 mm radiator which is better than 480 and perform almost like a dual 360 due to 200 mm fans. Monsta is not even much more efficient than any 60 mm thick radiator, plus you totally need the push-pull with at least 800 rpm to get the performance difference...800 rpm with radiator is not a noiseless system.
If count all sizes, look at all pictures, 400 mm rads looks POSSIBLE. So i would go for 400 mm rads and modding. But i have a MUCH MORE greater plan and even with 3 months delay of all problems (not my problems mostly) i will get custom made case for FOUR 400 mm radiators from Phobya. New V2 versions, 45 mm thick. I will put two by two one by another in push-pull. Screws can puted trough fins after "little screwdriver space opening", so it will be two 400 mm Monsta 90 mm thick. My personal case design, third one and the most success
Yes, it works like a miracle
And the worst thing for me that H630 don't have a window at stock. And nope, modding is not an option: it's hard to make or order "plexi window with stamping into metal hole"Edited by Master Freez - 5/21/13 at 5:22am