Overclock.net › Forums › Components › Memory › I'm having trouble overclock G.Skill in my memories.
New Posts  All Forums:Forum Nav:

I'm having trouble overclock G.Skill in my memories.

post #1 of 4
Thread Starter 
Hello own memories G.Skill Ripjaws 4GB DDR3 1600MHz F3-12800CL9S-4GBRL, with a motherboard asus cross hair formula v, fx 8120 processor running at 4.62ghz, and I'm running them at 1600mhz, but they wanted to put them on 1866MHz, however I'm finding it hard to do this, I kind memories to increase the voltage 1.6ve put the stock 11-11-11-28 latencies and comand rate in 1t, and I'm using when I least expect blue screen and hangs there restart the pc, and go back to 1600, aew someone can help me, I appreciate the help!
post #2 of 4
Download and open CPU-z. Click on the spd tab, it should show you suggested timings for different clockspeeds. If it shows one for 933 ( 1866) select those timings in bios and give it a whirl. Also make sure you are running at the suggested voltage for the ram you have.
Sand&Water
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600 K MSI p67 GD 65 Asus 6970 16 GB Ripjaws 1600 mhz 
Hard DriveOptical DriveOSMonitor
OCZ vertex 2 90 GB Hp 1260 I Win 7 HP 24" hp @ 1900x1200 
KeyboardPowerCaseMouse
Razer black widow mechanical XFX 650 Modular Coolermaster HAF 922 Alienware tact X 
Mouse Pad
fUnc industries 
  hide details  
Reply
Sand&Water
(13 items)
 
  
CPUMotherboardGraphicsRAM
2600 K MSI p67 GD 65 Asus 6970 16 GB Ripjaws 1600 mhz 
Hard DriveOptical DriveOSMonitor
OCZ vertex 2 90 GB Hp 1260 I Win 7 HP 24" hp @ 1900x1200 
KeyboardPowerCaseMouse
Razer black widow mechanical XFX 650 Modular Coolermaster HAF 922 Alienware tact X 
Mouse Pad
fUnc industries 
  hide details  
Reply
post #3 of 4
You may not be able to overclock it, but you should be able to get decent timings if the IC's are good. What are the 4th through 8th digits of the serial number? Actually, what are the first 8 digits? 1&2 are year of manufacture, 3&4 are the week, and 5-8 denotes the IC's used.

If you are unable to get it stable at 1866, and you can use up to 1.675v without any issues, then I suggest trying for 1600 8-9-8-24 or so, you may be able to get them even tighter. This will perform much better than 1866 with very loose timings. A general "rule" is that for every bump up in speed you don't want to increase the primary timings by more than 1 or you will likely lose performance. That means no looser than 10-10-10 @ 1866 or 11-11-11 @ 2133. However, my experience with AMD tells me that you want to keep it tight rather than increase frequency at expense of timings.
   
Z77 Bench-a-lot
(31 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K @ 4.92Ghz Asus Rampage 4 Extreme EVGA GTX670 FTW 2GB  EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 
GraphicsRAMHard DriveHard Drive
EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 16GB G.Skill Ripjaws-Z @ DDR3-2248 9-10-9-26 1T Samsung 830 256GB SSD WD10EZEX 1TB HDD 
Hard DriveHard DriveHard DriveHard Drive
WD10EALX 1TB HDD Seagate Barracuda 7200.14 1TB WD3200AAKS 320GB HDD WD5000HHTZ 10krpm 500GB VelociRaptor 
Optical DriveCoolingCoolingCooling
LG/Hitachi Slim DVD-R/W Custom MB-Backside VRM-sinks (Copper) 3x NZXT RF-FX140LB 1-2krpm 98.3CFM Case Fans 2x Corsair SP120-PE Case Fans 
CoolingCoolingCoolingCooling
Heatkiller GTX680 "Hole Edition" Block + Backplate XSPC Single-Bay Res (Single 5.25 bay) EK Multioption Res X2 - Advanced 150 DD "Fill-Port Res" + Fill-Port Fitting (Red) 
CoolingCoolingCoolingCooling
2x MCP35X + Heatsinks/80x15mm Fan XSPC EX420 Alphacool NeXXos UT60 240 6x Bgears Blasters 140mm 1800rpm Fans 
CoolingCoolingCoolingOS
4x Koolance 120x25mm 2600rpm Fans Comp/Rotary Fittings (BP/XSPC/Monsoon) Primoflex Pro LRT - White (1/2x3/4) Windows 7 Professional 64bit  
MonitorMonitorMonitorMonitor
Dell P2210Hb 21.5" 1920x1080p Viewsonic VA2012WB 20.1" LCD 1680x1050 Dell U3014 Eizo 27" 1440p 10bit RGB-LED Backlit AH-IPS Panel 
MonitorKeyboardPowerCase
55" LG HDTV (their top 2014 model) Ducky Mechanical (Browns) NZXT HALE90 850W + 8 blown-up AX1200/i's NZXT Switch 810 (White) 
MouseMouse PadAudioAudio
R.A.T.3 + MX510 My Desk GRADO RS1i Headphones Grado PS1000 Headphones 
OtherOtherOtherOther
Bitfenix Hydra Pro Fan Controller 5ch 30W/ch Bitfenix Alchemy Individually-Sleeved Extension... NZXT Individually-Sleeved Front Panel Wires (Bl... Phobya Sleeved 1x3pin-to-4x3pin Fan Splitter 
OtherOtherOther
Sleeved Wires w Paracord myself (no Heatshrink) Custom Front and Top Panels w HexxMesh *In Prog... Working on Custom Pedestal Prototype 
  hide details  
Reply
   
Z77 Bench-a-lot
(31 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K @ 4.92Ghz Asus Rampage 4 Extreme EVGA GTX670 FTW 2GB  EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 
GraphicsRAMHard DriveHard Drive
EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 16GB G.Skill Ripjaws-Z @ DDR3-2248 9-10-9-26 1T Samsung 830 256GB SSD WD10EZEX 1TB HDD 
Hard DriveHard DriveHard DriveHard Drive
WD10EALX 1TB HDD Seagate Barracuda 7200.14 1TB WD3200AAKS 320GB HDD WD5000HHTZ 10krpm 500GB VelociRaptor 
Optical DriveCoolingCoolingCooling
LG/Hitachi Slim DVD-R/W Custom MB-Backside VRM-sinks (Copper) 3x NZXT RF-FX140LB 1-2krpm 98.3CFM Case Fans 2x Corsair SP120-PE Case Fans 
CoolingCoolingCoolingCooling
Heatkiller GTX680 "Hole Edition" Block + Backplate XSPC Single-Bay Res (Single 5.25 bay) EK Multioption Res X2 - Advanced 150 DD "Fill-Port Res" + Fill-Port Fitting (Red) 
CoolingCoolingCoolingCooling
2x MCP35X + Heatsinks/80x15mm Fan XSPC EX420 Alphacool NeXXos UT60 240 6x Bgears Blasters 140mm 1800rpm Fans 
CoolingCoolingCoolingOS
4x Koolance 120x25mm 2600rpm Fans Comp/Rotary Fittings (BP/XSPC/Monsoon) Primoflex Pro LRT - White (1/2x3/4) Windows 7 Professional 64bit  
MonitorMonitorMonitorMonitor
Dell P2210Hb 21.5" 1920x1080p Viewsonic VA2012WB 20.1" LCD 1680x1050 Dell U3014 Eizo 27" 1440p 10bit RGB-LED Backlit AH-IPS Panel 
MonitorKeyboardPowerCase
55" LG HDTV (their top 2014 model) Ducky Mechanical (Browns) NZXT HALE90 850W + 8 blown-up AX1200/i's NZXT Switch 810 (White) 
MouseMouse PadAudioAudio
R.A.T.3 + MX510 My Desk GRADO RS1i Headphones Grado PS1000 Headphones 
OtherOtherOtherOther
Bitfenix Hydra Pro Fan Controller 5ch 30W/ch Bitfenix Alchemy Individually-Sleeved Extension... NZXT Individually-Sleeved Front Panel Wires (Bl... Phobya Sleeved 1x3pin-to-4x3pin Fan Splitter 
OtherOtherOther
Sleeved Wires w Paracord myself (no Heatshrink) Custom Front and Top Panels w HexxMesh *In Prog... Working on Custom Pedestal Prototype 
  hide details  
Reply
post #4 of 4
Do you have one module or two?

You should try DDR3-1866 9-11-10-28 1.60V

Test each at these settings first to make sure they can pass. If you want, post BIOS pictures and we can take a look

Cheers
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Memory
Overclock.net › Forums › Components › Memory › I'm having trouble overclock G.Skill in my memories.