post #1 of 1
Thread Starter 
I have a GA-F2A85X-UP4 with an a8-5600K. I tried using some RAM I bought from a friend in the board and it booted into windows fine (with my old ram). I realized I wanted to change memory settings so I rebooted. The board will not boot now. It keeps stopping at debug code: A6. A6 has to do with SCSI drives. I didn't think this board supported SCSI drives. I definitely do no have any SCSI drives connected, only 1 SATA. I have tried unplugging the HD and using my memory in each slot, I keep getting this error. I tried hitting the cmos rest button and taking hte battery out for 5 minutes but I still cant get past this code. Sad panda........

"Detect and install all currently connected SCSI drives" is what the manual states


Hmm, I guess this means that I accidentaly disabled the IGPU and the video was sent to a PCIE card instead. Looks like this is normal. smile.gif
Edited by Mr.N00bLaR - 5/11/13 at 5:01pm
6600K
(12 items)
 
  
CPUMotherboardGraphicsRAM
i5-6600k 4.6GHz Gigabyte z170XP-SLi-CF Sapphire R9-280X Toxic Corsair DDR4 2133MHz @ 3,000MHz 
Hard DriveCoolingOSKeyboard
Intel 535 480GB SSD Noctua NH-D15 Windows 10 Pro 64bit Microsoft Natural 4000 
PowerCaseMouseMouse Pad
Corsair TX950 ThermalTake Armor Logitech G700 Ripper XXL 
  hide details  
Reply
6600K
(12 items)
 
  
CPUMotherboardGraphicsRAM
i5-6600k 4.6GHz Gigabyte z170XP-SLi-CF Sapphire R9-280X Toxic Corsair DDR4 2133MHz @ 3,000MHz 
Hard DriveCoolingOSKeyboard
Intel 535 480GB SSD Noctua NH-D15 Windows 10 Pro 64bit Microsoft Natural 4000 
PowerCaseMouseMouse Pad
Corsair TX950 ThermalTake Armor Logitech G700 Ripper XXL 
  hide details  
Reply