Overclock.net › Forums › Cooling › Specialized Cooling › Phase Change › Dimastech SS phase change
New Posts  All Forums:Forum Nav:

Dimastech SS phase change - Page 2

post #11 of 15
Thread Starter 
For anyone interested, I got an response from Dimas and he said that the EVO with 1/2 HP compressor does around -30 at 300W load and the EVO Beast with 3/4 HP compressor handles 300W at around -35. He added that both come with mounting HW and insulation equipment.

You can also choose the hose sleeving, the finish between powdercoat and glossy, and the hose length between 60cm and 100cm, which is nice.

Time to start saving up.
post #12 of 15
If that's the case I would contact him about getting a system made for the load you want.
Higher loads need larger condensers not larger compressors after all.
post #13 of 15
Thread Starter 
Quote:
Originally Posted by NoL View Post

If that's the case I would contact him about getting a system made for the load you want.
I'm not sure I follow. If the system is good up to 300W load, then surely anything below that would fare perfectly fine?
Edited by Fulvin - 5/16/13 at 2:46pm
post #14 of 15
Somehow I missed the post right before mine.
If it's good to that load then it's fine, I was looking at the post before that about 150w/200w.
post #15 of 15
Thread Starter 
I still need to clear that up with him because on the product info he lists 200W @-31, but when I asked about 300W load in the email, he told me it would handle it around -30 which sounds unrealistic if talking about the same unit.

Thanks for the info though.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Phase Change
Overclock.net › Forums › Cooling › Specialized Cooling › Phase Change › Dimastech SS phase change