Originally Posted by icostin
I've tried putting the reservoir horizontally too, but I found that it takes a lot of time and effort to bleed the air out. I've tried it outside the case and still it's hard to get it out so... test it before you validate this option. See my build log in the sig on page 1, I've tried it and abandoned the idea because of this air bleeding problem. Although the idea of putting them as Tath suggested is bright indeed and aesthetics are far more better than the initial setup, you should consider that bleeding the air and liquid out of the system will not be a walk in the park.
Yoiu can give it a try this way :
Thnx for this and the picture! Don't know where the difference is but I tested the setup today and there was no problem bleeding the air...
Just some pics
So the top section is finished except for the wiring which Ill do last.
Been a while now seeing the case dressed up I thought what the heck lets put it all on
What to do list
* Downstairs radiators
* Pump mounts
* Few acrylic bends