Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › cooling requirements for tri-sli and cpu
New Posts  All Forums:Forum Nav:

cooling requirements for tri-sli and cpu

post #1 of 12
Thread Starter 
new here -- check out my introduction.

i've been sitting on 3 GTX 580s and 3 HeatKiller blocks for some time now, and i want to finally build a loop for them. also in the loop, or perhaps in a second loop, an i7-2600k with a HeatKiller block. would rather keep it simple with a single loop, however.

my question, probably asked a hundred times before, is how much radiator do i need? i'm primarily looking for a quiet system; not necessarily super low temps.

i've seen questions like this addressed before, but i'd like to hear from someone who has a similar setup, or maybe from someone with second-hand experience.

thanks.
dan
post #2 of 12
What case are you using
Parvum Warfare
(16 items)
 
Parvum Titanfall
(21 items)
 
ROBOCOP
(25 items)
 
CPUMotherboardGraphicsRAM
4970k EVGA z97 Stinger Nvidia Titan Black 8Gb Corsair Vengeance LP 
Hard DriveCoolingCoolingCooling
Samsung EVO 500Gb Swiftech Apogee XL CPU block Swiftech KOMODO NV LE GPU block Darkside 240mm & 120mm Radiators 
CoolingCoolingCoolingCooling
Bitspower True Brass fittings Noiseblocker Multiframe 120mm fans  E22 Acrylic Tube Mayhems Aurora 2 fluid 
OSPowerCaseOther
Windows 8.1 Corsair RM650 Custom Parvum Systems Ensourced Custom Sleeved Cables 
CPUMotherboardGraphicsRAM
Intel 4670k @ 4.8Ghz Asus Gryphon w/ Thermal Armor 2 x EVGA GTX 770 SC Corsair Dominator GT 8Gb 1866Mhz 
Hard DriveCoolingCoolingCooling
Samsung EVO 250Gb EK Supremacy Clean Nickel Plexi Swiftech MCP35X Pump Mayhems Aurora 2 Coolant 
CoolingCoolingCoolingCooling
4 x Coolermaster JetFlo 120mm Fans 3 x NoiseBlocker Black Silent Pro 80x15mm Fans EK Monarch X4 Clean Nickel Plexi 2 x EK GTX 770 Clean Nickel Plexi 
CoolingCoolingCoolingCooling
2 x EK Coolstream PE 240mm Radiator Bitspower Black Sparkle Fittings E22 Acrylic Tube Bitspower Reservoir/Pump Top Combo 
OSPowerCaseOther
Windows 8.1 Corsair AX860 Parvum Systems Customized S2.0 Ensourced Custom Sleeved Cables 
Other
Various Custom Vinyl and Paint Work 
CPUMotherboardGraphicsRAM
3930k @ 5.1 Asus Rampage IV Extreme 3 x EVGA GTX 780 SC 16Gb Corsair Dominator GT 2133Mhz 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 512Gb 2 x Aquacomputer Modularity 480 Single Circuit 100+ Bitspower Fittings E22 12mm/10mm Acrylic Tube 
CoolingCoolingCoolingCooling
Primochill DI Water 1 x Aquacomputer Modularity 240 Single Circuit 2 x Aquacomputer Aqualis Reservoir 4 x MCP35X w/ 2 x Aquacomputer Dual DDC Tops 
CoolingCoolingCoolingCooling
EK Supremacy Full Nickle Clean CSQ CPU Block 2 x EK Monarch Ram Blocks Clean CSQ Acetel XSPC RIVE Motherboard Block Kit 3 x EK Titan Waterblocks Nickle Plexi w/ Backpl... 
CoolingOSMonitorKeyboard
12 x Noiseblocker Multiframe 120mm Fans 1250rpm Windows 8 Pro 3 x LG 27ea63v Corsair K95 
PowerCaseMouseMouse Pad
Corsair AX1200 w/ Ensourced Custom Sleeved Cables 900D w/ Custom Paint Corsair M95  CorePad XXL 
Audio
Logitech z623 
  hide details  
Reply
Parvum Warfare
(16 items)
 
Parvum Titanfall
(21 items)
 
ROBOCOP
(25 items)
 
CPUMotherboardGraphicsRAM
4970k EVGA z97 Stinger Nvidia Titan Black 8Gb Corsair Vengeance LP 
Hard DriveCoolingCoolingCooling
Samsung EVO 500Gb Swiftech Apogee XL CPU block Swiftech KOMODO NV LE GPU block Darkside 240mm & 120mm Radiators 
CoolingCoolingCoolingCooling
Bitspower True Brass fittings Noiseblocker Multiframe 120mm fans  E22 Acrylic Tube Mayhems Aurora 2 fluid 
OSPowerCaseOther
Windows 8.1 Corsair RM650 Custom Parvum Systems Ensourced Custom Sleeved Cables 
CPUMotherboardGraphicsRAM
Intel 4670k @ 4.8Ghz Asus Gryphon w/ Thermal Armor 2 x EVGA GTX 770 SC Corsair Dominator GT 8Gb 1866Mhz 
Hard DriveCoolingCoolingCooling
Samsung EVO 250Gb EK Supremacy Clean Nickel Plexi Swiftech MCP35X Pump Mayhems Aurora 2 Coolant 
CoolingCoolingCoolingCooling
4 x Coolermaster JetFlo 120mm Fans 3 x NoiseBlocker Black Silent Pro 80x15mm Fans EK Monarch X4 Clean Nickel Plexi 2 x EK GTX 770 Clean Nickel Plexi 
CoolingCoolingCoolingCooling
2 x EK Coolstream PE 240mm Radiator Bitspower Black Sparkle Fittings E22 Acrylic Tube Bitspower Reservoir/Pump Top Combo 
OSPowerCaseOther
Windows 8.1 Corsair AX860 Parvum Systems Customized S2.0 Ensourced Custom Sleeved Cables 
Other
Various Custom Vinyl and Paint Work 
CPUMotherboardGraphicsRAM
3930k @ 5.1 Asus Rampage IV Extreme 3 x EVGA GTX 780 SC 16Gb Corsair Dominator GT 2133Mhz 
Hard DriveCoolingCoolingCooling
Samsung 840 Pro 512Gb 2 x Aquacomputer Modularity 480 Single Circuit 100+ Bitspower Fittings E22 12mm/10mm Acrylic Tube 
CoolingCoolingCoolingCooling
Primochill DI Water 1 x Aquacomputer Modularity 240 Single Circuit 2 x Aquacomputer Aqualis Reservoir 4 x MCP35X w/ 2 x Aquacomputer Dual DDC Tops 
CoolingCoolingCoolingCooling
EK Supremacy Full Nickle Clean CSQ CPU Block 2 x EK Monarch Ram Blocks Clean CSQ Acetel XSPC RIVE Motherboard Block Kit 3 x EK Titan Waterblocks Nickle Plexi w/ Backpl... 
CoolingOSMonitorKeyboard
12 x Noiseblocker Multiframe 120mm Fans 1250rpm Windows 8 Pro 3 x LG 27ea63v Corsair K95 
PowerCaseMouseMouse Pad
Corsair AX1200 w/ Ensourced Custom Sleeved Cables 900D w/ Custom Paint Corsair M95  CorePad XXL 
Audio
Logitech z623 
  hide details  
Reply
post #3 of 12
Edit
Edited by bigmac11 - 6/1/13 at 5:58pm
Main system
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k Gigabyte GA-Z77X-UP7  3 x Sapphire 7950 16 GB GSkill 
Hard DriveOptical DriveCoolingOS
Samsung 830 SSD 2x Samsung F1 Samsung TFC 480, 360, BI 140. EK 250 res. 355 with XSP... Win 7 + Vista 
MonitorKeyboardPowerCase
Catleap Corsair K90 EVGA 1300 G2 Corsair 800d 
MouseMouse PadAudioAudio
Coolermaster Spawn Ratpad Soundblaster XFi HD Logitech Z5500 
  hide details  
Reply
Main system
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k Gigabyte GA-Z77X-UP7  3 x Sapphire 7950 16 GB GSkill 
Hard DriveOptical DriveCoolingOS
Samsung 830 SSD 2x Samsung F1 Samsung TFC 480, 360, BI 140. EK 250 res. 355 with XSP... Win 7 + Vista 
MonitorKeyboardPowerCase
Catleap Corsair K90 EVGA 1300 G2 Corsair 800d 
MouseMouse PadAudioAudio
Coolermaster Spawn Ratpad Soundblaster XFi HD Logitech Z5500 
  hide details  
Reply
post #4 of 12
Thread Starter 
as bigmac11 has advised, i need 6x120 minimum.

i have several cases on hand that i could use. a 650D or a Phantom would require external rads for sure.

i also have a Switch 810. with mods, can probably get enough rad inside. or, i saw a custom pedestal made by forum member Dwood. he's apparently made them available in the past, i can fit plenty of rad quite easily.

dan
Edited by Svobey - 5/19/13 at 9:39pm
post #5 of 12
Thread Starter 
thanks. that's just the kind of info i was looking for.
post #6 of 12
Edit
Edited by bigmac11 - 6/1/13 at 5:58pm
Main system
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k Gigabyte GA-Z77X-UP7  3 x Sapphire 7950 16 GB GSkill 
Hard DriveOptical DriveCoolingOS
Samsung 830 SSD 2x Samsung F1 Samsung TFC 480, 360, BI 140. EK 250 res. 355 with XSP... Win 7 + Vista 
MonitorKeyboardPowerCase
Catleap Corsair K90 EVGA 1300 G2 Corsair 800d 
MouseMouse PadAudioAudio
Coolermaster Spawn Ratpad Soundblaster XFi HD Logitech Z5500 
  hide details  
Reply
Main system
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600k Gigabyte GA-Z77X-UP7  3 x Sapphire 7950 16 GB GSkill 
Hard DriveOptical DriveCoolingOS
Samsung 830 SSD 2x Samsung F1 Samsung TFC 480, 360, BI 140. EK 250 res. 355 with XSP... Win 7 + Vista 
MonitorKeyboardPowerCase
Catleap Corsair K90 EVGA 1300 G2 Corsair 800d 
MouseMouse PadAudioAudio
Coolermaster Spawn Ratpad Soundblaster XFi HD Logitech Z5500 
  hide details  
Reply
post #7 of 12
Thread Starter 
i actually kind of like external rads, so i'm still thinking on it.
post #8 of 12
Either the Switch 810 (fantastic case, really the best H2O case anywhere near it's price!) with an Alphacool NexXxoS XT45 420 (3x140) rad in top, a UT60 240 in bottom, and a either a UT60 560 or Monsta 480 in the pedestal, all with push-pull fans.

However, really the best bang for your buck is a Watercool MORA3 Pro 1260 9x140mm radiator. Absolutely beastly!
   
Z77 Bench-a-lot
(31 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K @ 4.92Ghz Asus Rampage 4 Extreme EVGA GTX670 FTW 2GB  EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 
GraphicsRAMHard DriveHard Drive
EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 16GB G.Skill Ripjaws-Z @ DDR3-2248 9-10-9-26 1T Samsung 830 256GB SSD WD10EZEX 1TB HDD 
Hard DriveHard DriveHard DriveHard Drive
WD10EALX 1TB HDD Seagate Barracuda 7200.14 1TB WD3200AAKS 320GB HDD WD5000HHTZ 10krpm 500GB VelociRaptor 
Optical DriveCoolingCoolingCooling
LG/Hitachi Slim DVD-R/W Custom MB-Backside VRM-sinks (Copper) 3x NZXT RF-FX140LB 1-2krpm 98.3CFM Case Fans 2x Corsair SP120-PE Case Fans 
CoolingCoolingCoolingCooling
Heatkiller GTX680 "Hole Edition" Block + Backplate XSPC Single-Bay Res (Single 5.25 bay) EK Multioption Res X2 - Advanced 150 DD "Fill-Port Res" + Fill-Port Fitting (Red) 
CoolingCoolingCoolingCooling
2x MCP35X + Heatsinks/80x15mm Fan XSPC EX420 Alphacool NeXXos UT60 240 6x Bgears Blasters 140mm 1800rpm Fans 
CoolingCoolingCoolingOS
4x Koolance 120x25mm 2600rpm Fans Comp/Rotary Fittings (BP/XSPC/Monsoon) Primoflex Pro LRT - White (1/2x3/4) Windows 7 Professional 64bit  
MonitorMonitorMonitorMonitor
Dell P2210Hb 21.5" 1920x1080p Viewsonic VA2012WB 20.1" LCD 1680x1050 Dell U3014 Eizo 27" 1440p 10bit RGB-LED Backlit AH-IPS Panel 
MonitorKeyboardPowerCase
55" LG HDTV (their top 2014 model) Ducky Mechanical (Browns) NZXT HALE90 850W + 8 blown-up AX1200/i's NZXT Switch 810 (White) 
MouseMouse PadAudioAudio
R.A.T.3 + MX510 My Desk GRADO RS1i Headphones Grado PS1000 Headphones 
OtherOtherOtherOther
Bitfenix Hydra Pro Fan Controller 5ch 30W/ch Bitfenix Alchemy Individually-Sleeved Extension... NZXT Individually-Sleeved Front Panel Wires (Bl... Phobya Sleeved 1x3pin-to-4x3pin Fan Splitter 
OtherOtherOther
Sleeved Wires w Paracord myself (no Heatshrink) Custom Front and Top Panels w HexxMesh *In Prog... Working on Custom Pedestal Prototype 
  hide details  
Reply
   
Z77 Bench-a-lot
(31 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K @ 4.92Ghz Asus Rampage 4 Extreme EVGA GTX670 FTW 2GB  EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 
GraphicsRAMHard DriveHard Drive
EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 16GB G.Skill Ripjaws-Z @ DDR3-2248 9-10-9-26 1T Samsung 830 256GB SSD WD10EZEX 1TB HDD 
Hard DriveHard DriveHard DriveHard Drive
WD10EALX 1TB HDD Seagate Barracuda 7200.14 1TB WD3200AAKS 320GB HDD WD5000HHTZ 10krpm 500GB VelociRaptor 
Optical DriveCoolingCoolingCooling
LG/Hitachi Slim DVD-R/W Custom MB-Backside VRM-sinks (Copper) 3x NZXT RF-FX140LB 1-2krpm 98.3CFM Case Fans 2x Corsair SP120-PE Case Fans 
CoolingCoolingCoolingCooling
Heatkiller GTX680 "Hole Edition" Block + Backplate XSPC Single-Bay Res (Single 5.25 bay) EK Multioption Res X2 - Advanced 150 DD "Fill-Port Res" + Fill-Port Fitting (Red) 
CoolingCoolingCoolingCooling
2x MCP35X + Heatsinks/80x15mm Fan XSPC EX420 Alphacool NeXXos UT60 240 6x Bgears Blasters 140mm 1800rpm Fans 
CoolingCoolingCoolingOS
4x Koolance 120x25mm 2600rpm Fans Comp/Rotary Fittings (BP/XSPC/Monsoon) Primoflex Pro LRT - White (1/2x3/4) Windows 7 Professional 64bit  
MonitorMonitorMonitorMonitor
Dell P2210Hb 21.5" 1920x1080p Viewsonic VA2012WB 20.1" LCD 1680x1050 Dell U3014 Eizo 27" 1440p 10bit RGB-LED Backlit AH-IPS Panel 
MonitorKeyboardPowerCase
55" LG HDTV (their top 2014 model) Ducky Mechanical (Browns) NZXT HALE90 850W + 8 blown-up AX1200/i's NZXT Switch 810 (White) 
MouseMouse PadAudioAudio
R.A.T.3 + MX510 My Desk GRADO RS1i Headphones Grado PS1000 Headphones 
OtherOtherOtherOther
Bitfenix Hydra Pro Fan Controller 5ch 30W/ch Bitfenix Alchemy Individually-Sleeved Extension... NZXT Individually-Sleeved Front Panel Wires (Bl... Phobya Sleeved 1x3pin-to-4x3pin Fan Splitter 
OtherOtherOther
Sleeved Wires w Paracord myself (no Heatshrink) Custom Front and Top Panels w HexxMesh *In Prog... Working on Custom Pedestal Prototype 
  hide details  
Reply
post #9 of 12
Thread Starter 
i've considered the 9x140 rad from watercool. maybe attach it to the side panel, but filled with water it would be heavy. There's also the big square rad from phobya which has mounts for 4x200 fans. Mmmmm.... quiet.

i think i saw a mod with 4x140 in the roof, and 3x140 in the front with the drive cages removed. in the absence of a pedestal, i think this is the most appealing to me. Most cost effective, too.
post #10 of 12
Thread Starter 
i'm not into overclocking. how much does that add to your radiator needs? how does your cooling configuration perform at stock clock?

dan
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Case Mods
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › cooling requirements for tri-sli and cpu