post #1 of 1
Thread Starter 
Hi ,


Not to long ago I made a water cooled thin ITX build and it worked perfectly , today I removed the watercooling setup and placed the board on air , But now every time the 19V supply is plugged into the board it automatically seems to start , the CPU fan starts but there is no HHD indicator activity and it just sits there , the Power light on the board comes on , but the external one from the reset/power/on/off header dosent come one either .

The Board will turn off if the power button is held down long enough , I have tried re seating the CPU , and different ram Sticks . the board has 2 Bios modes , Normal , Config , in any of these positions it does the exact same thing . There is also no video output from the board either .

So I have no idea why its doing this it was working fine before , but I don't think I can return it as I removed the chipset heat sink and don't have the original screws/springs for mounting it back on and I guess this would void the warranty ? Nor do I have the original Box

Does anyone have any idea what it may be as the board is under a month old , or have I just lost a £100 motherboard and maybe im just not meant to have tech last with me .. frown.gif


Specs

4GB 1333 Mhz Ram ,
CPU - Pentium G2020
MB - intel DQ77KB
Edited by TwirlyWhirly555 - 5/22/13 at 9:55am
    
CPUMotherboardGraphicsHard Drive
Celecron N3150  JetWay computer NP591D4-3150 R9 380X PNY SSD 
CoolingOS
Pico ITX - Passive , R9 380X Stock dual fan coo... Win 10  
  hide details  
Reply
    
CPUMotherboardGraphicsHard Drive
Celecron N3150  JetWay computer NP591D4-3150 R9 380X PNY SSD 
CoolingOS
Pico ITX - Passive , R9 380X Stock dual fan coo... Win 10  
  hide details  
Reply