Overclock.net › Forums › Cooling › Water Cooling › air in water lines
New Posts  All Forums:Forum Nav:

air in water lines

post #1 of 2
Thread Starter 
I have a very bad and serious problem. I TRIED TO GET my water system going and I got no water moving at all. I have 2 quad 140mm rad's 1 cpu and 3 gpu's hooked up. 3/8 tubing(OD) and 1 D5 swiftech mcp655 pump. Its so bad I got another reservoir filled to the top and the water flowed upwards toward the graphics cards and nothing downwards. Its like there's a plug in the lines.


post #2 of 2
Thread Starter 
So I ordered another pump res/combo for the top half of the case. and attached another resovior to the d5 pumpon the bottom. I hope this clears up this problem. I never saw water just stop moving. Its like gravity does not exist. When I pour more water in it it just fills up then flushes like a toilet. then the draught allover again:mad:
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › air in water lines