Overclock.net › Forums › Graphics Cards › NVIDIA › [Official] NVIDIA GTX 780 Owner's Club
New Posts  All Forums:Forum Nav:

[Official] NVIDIA GTX 780 Owner's Club - Page 1869

post #18681 of 24924
Sooo guys I got a new 780 from EVGA , and im wondering if theres any way to maybe unlock the extra cuda cores like 780 TI ? or what do you guys reccomend me do? i really want to OC but its been a while since I have. and dont know if i should be flashing bio's? any reccomendations?
Blazing Speed
(13 items)
 
  
CPUMotherboardGraphicsRAM
3930K ASUS RAMPAGE IV EXTREME EVGA 780 SC 2 x 8 GB corsair vengeance 1600 
Hard DriveCoolingOSMonitor
BARRACUDA 3TB H110 Windows 7 64bit Ben Q GW2255 
KeyboardPowerCaseMouse
Razer Black Widow Corsair GS 800 series HAF XB COOLMASTER RAZER NAGA 2012 
Audio
TRITON PRO 5.1 !!!! 
  hide details  
Reply
Blazing Speed
(13 items)
 
  
CPUMotherboardGraphicsRAM
3930K ASUS RAMPAGE IV EXTREME EVGA 780 SC 2 x 8 GB corsair vengeance 1600 
Hard DriveCoolingOSMonitor
BARRACUDA 3TB H110 Windows 7 64bit Ben Q GW2255 
KeyboardPowerCaseMouse
Razer Black Widow Corsair GS 800 series HAF XB COOLMASTER RAZER NAGA 2012 
Audio
TRITON PRO 5.1 !!!! 
  hide details  
Reply
post #18682 of 24924
Quote:
Originally Posted by TheDuuud View Post

Hi everyone, I bought recently a gtx 780 DCUII (80.10.37.00.12 bios) and I've got a problem...

before this card I run with a gtx 780 Zotac amp ! and in the Tome raider's benchemark with an oc of 1051/1567 I have :

-gtx 780 Zotac amp : min fps : 38.9 Asus gtx 780 DCUII : min fps : 31.1
max fps : 62.1 Max fps : 60.3
av fps : 51.6 av fps : 44.9


I tried to overcloked the Asus stronger but the min ips stayed arround 31....before that I have overckloed the card by pushing the temp on 90 and the power target. (I was followed a website indication) But after 15 minute of gaming the pc reboot and i smell the smoke. So I open my tower ( master cooler silencio 450) and reboot the PC.
Since this bad times, my card run correctly but I don't understand 3 things :

1) why, with the same frequences of my past Zotac Amp ! my bench are so different ?

2) why GeForce experience told me to run Titanfall at max setting, and I could not keep the 60 frames at ultra +MSAAX2 (with the Zotac it was almost ok at ultra+MSAAX8).
GPU tweak says that the game use all my vram !

3) the green led of the card, light occasionally when my pc is completly off

All of this could be link to the bad overclocking ?

Please help and sorry for my English.redface.gif

1 - you may have a driver problem, did you re-install drivers after switching cards?
2- Do not use GeForce experience... tongue.gif
3- Your card still gets minimum voltage from the PSU, make sure to turn off the power line to the PSU, re-check your electric cables! smile.gif

If you wish i can help translating as i speak a few languages! PM me! thumb.gif
Quote:
Originally Posted by SparkyShaft View Post

Awesome, ok I did that and it does it if I touch my voltage at all. I can raise Core +100 Memory +400 Usage stays at 98-97% through whole test on both cards, clock barely throttles on #2 card 16.4k score, and doing the same on manual voltage of any sort makes it have 80% or less usage on the #2 card with a 12k score.

What was your PT in the AB monitor? Hitting 100%? increase it if that´s the case! wink.gif
Quote:
Originally Posted by hypespazm View Post

Sooo guys I got a new 780 from EVGA , and im wondering if theres any way to maybe unlock the extra cuda cores like 780 TI ? or what do you guys recommend me do? i really want to OC but its been a while since I have. and dont know if i should be flashing bio's? any recommendations?

No, there is no way to unlock cores they are laser cut!
Read my OC guide for some pointers: OCCAMRAZOR ADVANCED GK110 OC GUIDE
For bios flashing you have EZ3flash in my SIG and my flash guide too! thumb.gif


Cheers

Ed

(Team skyn3t)
S.S.
(14 items)
 
  
CPUMotherboardGraphicsRAM
I5-3570K@5.0Ghz@1,4v ASUS MAXIMUS V GENE MSI 1080Ti Gaming X 16GB GSKILL RIPJAW X DDR3 1866MHZ (9-10-9-24) (... 
Hard DriveHard DriveCoolingOS
OCZ Agility 3 120GB + Toshiba A100 250GB Western Digital 2TB  Homemade WC (everything on water) ;) W10x64 
MonitorMonitorMonitorPower
ASUS VG278HE ASUS VG278HE ASUS VG278HE Silverstone Strider 1200W 
CaseAudio
Corsair 500R THX 500W 5.1 
  hide details  
Reply
S.S.
(14 items)
 
  
CPUMotherboardGraphicsRAM
I5-3570K@5.0Ghz@1,4v ASUS MAXIMUS V GENE MSI 1080Ti Gaming X 16GB GSKILL RIPJAW X DDR3 1866MHZ (9-10-9-24) (... 
Hard DriveHard DriveCoolingOS
OCZ Agility 3 120GB + Toshiba A100 250GB Western Digital 2TB  Homemade WC (everything on water) ;) W10x64 
MonitorMonitorMonitorPower
ASUS VG278HE ASUS VG278HE ASUS VG278HE Silverstone Strider 1200W 
CaseAudio
Corsair 500R THX 500W 5.1 
  hide details  
Reply
post #18683 of 24924
Quote:
Originally Posted by OccamRazor View Post

1 - you may have a driver problem, did you re-install drivers after switching cards?
2- Do not use GeForce experience... tongue.gif
3- Your card still gets minimum voltage from the PSU, make sure to turn off the power line to the PSU, re-check your electric cables! smile.gif

Thank's for the reply !

1) I have the latest nvidia driver.
2) ok...but I found it work pretty well with my Zotac. You think it's **** ?
3) the computer it's entirely off cause my multi tap wall is off.

I just tried EVGA prec X and my min fps stayed at 31 with a big OC. (with my Zotac it does not tumble below 41 fps with the same oc...).

it pissed me off ! 'cause I keep the Asus instead of the Zotac because it look better and I was thinking that It will reach the same performance...
post #18684 of 24924
Quote:
Originally Posted by OccamRazor View Post


What was your PT in the AB monitor? Hitting 100%? increase it if that´s the case! wink.gif


Cheers

Ed

(Team skyn3t)

I have the power target at 106% everytime. It never exceeds 100% in every test i've done. Is the profiles in AB suppose to both look the same for 2 cards after restart. On the tutorial you said to paste the lines into the profiles, I added it to both of them. I'm assuming one profile was for one card, an the other etc... I've noticed that Bus_1 has an Offset grid. The Bus_2 profile does not, but contains everything else like the prior. Is that normal? If not should I just paste the grid over?




If it is normal then is the issue with clock+voltage throttle solved by using a custom bios my only alternative to fix? As it was the 2nd card doing the throttling an all, I just uninstalled my drivers, uninstalled afterburner an LLC in startup, swapped cards locations and reinstall driver/mod/AB b19 an all then tested again. Issue persists on 2nd card only. Touch voltage and the 2nd card throttles with less useage. I was very happy to see that if I used your mod an changed voltage that it stayed where I put it and didn't throttle voltage to 0.9 volts every time from 1.2 while using 3DMark or while gaming. But if I change it at all, at the 1.2 ceiling or below that it makes the 2nd card volt + clock throttle and less useage. These cards are driving me nuts with the throttling. So far my only option has been leave em at stock to achieve my boost clocks. I really appreciate the help. I've been going about this for 2 weeks now.
post #18685 of 24924
Quote:
Originally Posted by SparkyShaft View Post

I have the power target at 106% everytime. It never exceeds 100% in every test i've done. Is the profiles in AB suppose to both look the same for 2 cards after restart. On the tutorial you said to paste the lines into the profiles, I added it to both of them. I'm assuming one profile was for one card, an the other etc... I've noticed that Bus_1 has an Offset grid. The Bus_2 profile does not, but contains everything else like the prior. Is that normal? If not should I just paste the grid over?




If it is normal then is the issue with clock+voltage throttle solved by using a custom bios my only alternative to fix? As it was the 2nd card doing the throttling an all, I just uninstalled my drivers, uninstalled afterburner an LLC in startup, swapped cards locations and reinstall driver/mod/AB b19 an all then tested again. Issue persists on 2nd card only. Touch voltage and the 2nd card throttles with less useage. I was very happy to see that if I used your mod an changed voltage that it stayed where I put it and didn't throttle voltage to 0.9 volts every time from 1.2 while using 3DMark or while gaming. But if I change it at all, at the 1.2 ceiling or below that it makes the 2nd card volt + clock throttle and less useage. These cards are driving me nuts with the throttling. So far my only option has been leave em at stock to achieve my boost clocks. I really appreciate the help. I've been going about this for 2 weeks now.

You are probably hitting a power limit! You need a modded bios to increase it, check your bios version and in the OP you have all our bios! And EZ3flash in my SIG and my flash guide too!
In AB with the volt mod enabled you see the "auto" in the voltage box!
AB only changes the offset grid on one Ven_ file as there is basically only 1 line of code to send voltage! wink.gif
Dont hesitate to ask anything else here, or drop me a PM!

Cheers

Ed

(Team skyn3t)
S.S.
(14 items)
 
  
CPUMotherboardGraphicsRAM
I5-3570K@5.0Ghz@1,4v ASUS MAXIMUS V GENE MSI 1080Ti Gaming X 16GB GSKILL RIPJAW X DDR3 1866MHZ (9-10-9-24) (... 
Hard DriveHard DriveCoolingOS
OCZ Agility 3 120GB + Toshiba A100 250GB Western Digital 2TB  Homemade WC (everything on water) ;) W10x64 
MonitorMonitorMonitorPower
ASUS VG278HE ASUS VG278HE ASUS VG278HE Silverstone Strider 1200W 
CaseAudio
Corsair 500R THX 500W 5.1 
  hide details  
Reply
S.S.
(14 items)
 
  
CPUMotherboardGraphicsRAM
I5-3570K@5.0Ghz@1,4v ASUS MAXIMUS V GENE MSI 1080Ti Gaming X 16GB GSKILL RIPJAW X DDR3 1866MHZ (9-10-9-24) (... 
Hard DriveHard DriveCoolingOS
OCZ Agility 3 120GB + Toshiba A100 250GB Western Digital 2TB  Homemade WC (everything on water) ;) W10x64 
MonitorMonitorMonitorPower
ASUS VG278HE ASUS VG278HE ASUS VG278HE Silverstone Strider 1200W 
CaseAudio
Corsair 500R THX 500W 5.1 
  hide details  
Reply
post #18686 of 24924
Hi all,

Thanks for your work Skynet Team !

I just want to know what's the benefit to flash my 780 ? (with your bios) Fan ? Temperature ? Mhz ?

Thanks for your answer smile.gif
post #18687 of 24924
Quote:
Originally Posted by NeOs89 View Post

Hi all,

Thanks for your work Skynet Team !

I just want to know what's the benefit to flash my 780 ? (with your bios) Fan ? Temperature ? Mhz ?

Thanks for your answer smile.gif


All skyn3t 780 vBios
  • Disabled boost
  • 3d voltage adjustable
  • 1.212v unlocked
  • Fan Idle 20%
  • Fan bumped to 100%
  • Default power target 100% 330w by 150% slide 500w

Go to the OP and scroll down until you find it: http://www.overclock.net/t/1393791/official-nvidia-gtx-780-owners-club/0_100

My OC guide for some pointers: OCCAMRAZOR ADVANCED GK110 OC GUIDE


Cheers

Ed

(Team skyn3t)
S.S.
(14 items)
 
  
CPUMotherboardGraphicsRAM
I5-3570K@5.0Ghz@1,4v ASUS MAXIMUS V GENE MSI 1080Ti Gaming X 16GB GSKILL RIPJAW X DDR3 1866MHZ (9-10-9-24) (... 
Hard DriveHard DriveCoolingOS
OCZ Agility 3 120GB + Toshiba A100 250GB Western Digital 2TB  Homemade WC (everything on water) ;) W10x64 
MonitorMonitorMonitorPower
ASUS VG278HE ASUS VG278HE ASUS VG278HE Silverstone Strider 1200W 
CaseAudio
Corsair 500R THX 500W 5.1 
  hide details  
Reply
S.S.
(14 items)
 
  
CPUMotherboardGraphicsRAM
I5-3570K@5.0Ghz@1,4v ASUS MAXIMUS V GENE MSI 1080Ti Gaming X 16GB GSKILL RIPJAW X DDR3 1866MHZ (9-10-9-24) (... 
Hard DriveHard DriveCoolingOS
OCZ Agility 3 120GB + Toshiba A100 250GB Western Digital 2TB  Homemade WC (everything on water) ;) W10x64 
MonitorMonitorMonitorPower
ASUS VG278HE ASUS VG278HE ASUS VG278HE Silverstone Strider 1200W 
CaseAudio
Corsair 500R THX 500W 5.1 
  hide details  
Reply
post #18688 of 24924
Is there not a way to switch between 3 way and 2 way SLI with settings. I know with tri fire you could pick if you want to do three way with either set of GPU's but with tri SLI I can't even find the option.
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
 
4x r290's
(9 items)
 
3x 7970's
(16 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K 4.8Ghz offset ASUS X79 Rampage IV Extreme GTX 780 with EK waterblock GTX 780 with EK waterblock 
GraphicsRAMHard DriveHard Drive
GTX 780 with EK waterblock  Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 256GB Samsung 950 Pro 256GB Samsung 840 Pro 
CoolingCoolingOSMonitor
RX360, EX360, EX360, and 480 Rad's XSPC Raystorm CPU Block Dual boot (other unnamed OS) and Win8 Pro QNIX QX2710 27" 2560x1440 @ 112hz 
KeyboardPowerCase
Corsair K90 Corsair AX1200 Corsair 700D Modded w/ External Radiators 
CPUMotherboardGraphicsRAM
Intel i5 3570K GA-Z77X-UD3H 4x R9 290's 8GB 1600Mhz 
Hard DriveOSPowerCase
1TB Hard Drive Win8 Corsair Dual PSU - AX1200 and HX650 Open Case 
Other
Thee 16x Risers and One 1x Riser 
CPUMotherboardGraphicsRAM
i7 3930K 5Ghz Bench ASUS X79 Rampage IV Extreme 3x AMD 7970's w/ EK water blocks Samsung 16GB (4x4gb) 2400Mhz 10-12-12-31-1t @ 1... 
Hard DriveCoolingCoolingMonitor
128GB Samsung 830  RX360, RX240, EX360 XSPC Raystorm CPU Block QNIX QX2710 27" 2560x1440 @ 114hz 
KeyboardPowerCase
Corsair K90 Corsair AX760i Corsair 700D Modded w/ External Radiators 
  hide details  
Reply
post #18689 of 24924
Can somebody owner of Gigabyte 780 GHZ tell me what temps got with auto fan 66%? I mean with closed case. I am getting 78-80C , boost 1176mhz.
PC
(13 items)
 
  
CPUMotherboardGraphicsRAM
I7 3770K 3.5 Asus Sabretooth Z77 Evga Gtx 980 2x4gb Corsair Vengeance DDR3 LP White Arctic 16... 
OSPowerCase
Windows 7 Ultimate x64 XFX P1-750X-XXB9 Cooler Master Centurion 590 
  hide details  
Reply
PC
(13 items)
 
  
CPUMotherboardGraphicsRAM
I7 3770K 3.5 Asus Sabretooth Z77 Evga Gtx 980 2x4gb Corsair Vengeance DDR3 LP White Arctic 16... 
OSPowerCase
Windows 7 Ultimate x64 XFX P1-750X-XXB9 Cooler Master Centurion 590 
  hide details  
Reply
post #18690 of 24924
been a while now .so i thought maybe some imrpvoement .

is there anyway to enable 4 way sli on latest nvidia drivers via inf mod etc --anyone --

what about gtx 780 ti ..is 4 way sli possible on them --

some you tube videos show quad 780 --but what drivers --
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: NVIDIA
Overclock.net › Forums › Graphics Cards › NVIDIA › [Official] NVIDIA GTX 780 Owner's Club