Overclock.net › Forums › Graphics Cards › NVIDIA › [Official] NVIDIA GTX 780 Owner's Club
New Posts  All Forums:Forum Nav:

[Official] NVIDIA GTX 780 Owner's Club - Page 2104

post #21031 of 24925
Quote:
Originally Posted by jameyscott View Post

@OccamRazor
Is it possible that the B1 stepping of the HOF 780 uses a different controller because I've tried 3.0.0 and 3.0.1 and neither of them with the ASUS DirectCUII wlil overclock, with the addional information in the AB profile, it greys out the option to change voltage.

If you have a picture of your cards VRM's i can tell you for sure! thumb.gif
Quote:
Originally Posted by Teiji View Post

Sorry for the late reply. Here is the screenshot of AB when gaming and Heaven benchmark:


Your voltage is not maxed but your power draw is hitting over 100%, increase the power draw slider to 115% ( with our bios of course, as you are running stock bios, max it at 106%) and check again! thumb.gif
Quote:
Originally Posted by niketpla View Post


see the gpu clock still says the stock clock with boost after a flash but says default is what the flashed bios should be.
just re flashed and same thing, AB still limits power to 106%. the OC takes according to the test results for 3dmark but the score is worse than stock so something is wrong.

That is not our bios for sure...

Quote:
Originally Posted by niketpla View Post

going by the BIOS revision listed in the tutorial

You have to flash the same bios type as it came with your card:

A1 cards - 80.10.36/37/3A/39 bios
B1 cards - 80.80.xx.xx.xx

Even though all GK110 bios are basically the same (within each card type, as a KPE bios is substantially different than a reference 780 but intrinsically is the same) , most has specific brand/PCB or memory changes and to all non EVGA cards its best to keep the brand bios modded to avoid voiding your warranty!
Quote:
Originally Posted by HothTron View Post

Does afterburner even work on Asus cards?

Yes it does as long as they are reference cards, AB WILL NOT WORK or not fully work on non-reference cards by its own design!
And before anyone asks, 780Ti is NON reference ans its has a modified 780 PCB! tongue.gif
Quote:
Originally Posted by niketpla View Post

Ok so after letting it sit unplugged for a min got it to come up, flashed the bios stock and re installed drivers.
surprisingly it did this with AB uninstalled.
all is well now. i left the card unplugged for a while and it worked, flashed the bios to stock and re installed the drivers. leaving it at that for tonight.sadsmiley.gif

Surprisingly? I think not! If you let a program run at boot with specific core/memory clock settings of course you should expect problems if you change variables all of a sudden!
Rule of the thumb after flashing when you encounter issues is to remove all OC programs or set the settings to default ( in all Riva Tuner developed clones from AB; PX, Oc guru, GPU tweak) deleting prifiles folder usually takes care of it, remove drivers with DDU ( Display Driver Uninstaller) http://www.guru3d.com/files-details/display-driver-uninstaller-download.html
re-install drivers, re-enable or re-install OC software! thumb.gif

Quote:
Originally Posted by HothTron View Post

Is it just me, is the Asus GPU Tweak software somewhat sucky?
gMTSLfS.jpg

As i stated above, from all OC software that derived from Riva Tuner the only one being continuously developed is AfterBurner, PX also was supposedly revamped but ended up removed as it had serious issues!
The problem is Unwinder (Riva Tuner creator and AB developer only gives support in AB to reference cards and (of course as its sponsored by MSI gives support for non-reference MSI cards).
That leaves ALL other brands non-reference cards out in the cold, meaning you have to use GPU Tweak ot PX!

OR have a go with my guide as it might work for you card wit AB... wink.gif

Quote:
"For those who want to try it AT YOUR OWN RISK


VOLT MOD FOR ASUS GTX 780 DCUII with Voltage controller CHL8318 up to 1,300V

Go to profiles folder inside Afterburner folder :



Now open the: VEN_10DE&DEV_1004&SUBSYS_27843842&REV_A1&BUS_3&DEV_0&FN_0.... files inside the profiles folder and add
these lines:

[Settings]
VDDC_Generic_Detection = 0
VDDC_CHL8318_Detection = 44h

Now save and close notepad and restart Afterburner, it will ask you to reboot!"


Cheers

Occamrazor
Edited by OccamRazor - 9/1/14 at 1:18am
S.S.
(14 items)
 
  
CPUMotherboardGraphicsRAM
I5-3570K@5.0Ghz@1,4v ASUS MAXIMUS V GENE MSI 1080Ti Gaming X 16GB GSKILL RIPJAW X DDR3 1866MHZ (9-10-9-24) (... 
Hard DriveHard DriveCoolingOS
OCZ Agility 3 120GB + Toshiba A100 250GB Western Digital 2TB  Homemade WC (everything on water) ;) W10x64 
MonitorMonitorMonitorPower
ASUS VG278HE ASUS VG278HE ASUS VG278HE Silverstone Strider 1200W 
CaseAudio
Corsair 500R THX 500W 5.1 
  hide details  
Reply
S.S.
(14 items)
 
  
CPUMotherboardGraphicsRAM
I5-3570K@5.0Ghz@1,4v ASUS MAXIMUS V GENE MSI 1080Ti Gaming X 16GB GSKILL RIPJAW X DDR3 1866MHZ (9-10-9-24) (... 
Hard DriveHard DriveCoolingOS
OCZ Agility 3 120GB + Toshiba A100 250GB Western Digital 2TB  Homemade WC (everything on water) ;) W10x64 
MonitorMonitorMonitorPower
ASUS VG278HE ASUS VG278HE ASUS VG278HE Silverstone Strider 1200W 
CaseAudio
Corsair 500R THX 500W 5.1 
  hide details  
Reply
post #21032 of 24925
Quote:
Originally Posted by OccamRazor View Post

If i knew the lotto numbers today i would be rich tomorrow... tongue.gif
Everything has a time and place under the sun... wink.gif
You have a lot of cards, can still get a DCUII 780/780Ti (works on both) just for the fun of it! smile.gif

Cheers

Occamrazor

Correct.. Point is that I sold most of my 780's because i crossed over to the 290X for daily usage due to Mantle on BF4 working so well and BF4 is the only GPU intensive game I play at the moment.
Only have a single Gigabyte reference 780 left over with a modded GEFORCE GTX LED strip with blue LED's and a ColdZero backplate and i only use it on events pure for the looks.

If I come across a DCII for <€300 i'll grab it just to play with it again smile.gif
Thundahcat.
(17 items)
 
   
CPUMotherboardGraphicsRAM
AMD Athlon XP-M Barton @ 2612Mhz ASUS A7N8X-X HIS Radeon X800XL 256MB w/ V-MOD @ 585Mhz GPU 5... 3x512MB Samsung PC-3200 CL3 
Hard DriveCoolingOSOS
Maxtor 80GB IDE Cooler Master alu/copper block with a Slipstrea... Windows 98 SE Windows XP Pro SP3 
PowerCase
Cooler Master Real Power M520W OEM with great airflow and even cable management 
  hide details  
Reply
Thundahcat.
(17 items)
 
   
CPUMotherboardGraphicsRAM
AMD Athlon XP-M Barton @ 2612Mhz ASUS A7N8X-X HIS Radeon X800XL 256MB w/ V-MOD @ 585Mhz GPU 5... 3x512MB Samsung PC-3200 CL3 
Hard DriveCoolingOSOS
Maxtor 80GB IDE Cooler Master alu/copper block with a Slipstrea... Windows 98 SE Windows XP Pro SP3 
PowerCase
Cooler Master Real Power M520W OEM with great airflow and even cable management 
  hide details  
Reply
post #21033 of 24925
Quote:
Originally Posted by Imprezzion View Post

Correct.. Point is that I sold most of my 780's because i crossed over to the 290X for daily usage due to Mantle on BF4 working so well and BF4 is the only GPU intensive game I play at the moment.
Only have a single Gigabyte reference 780 left over with a modded GEFORCE GTX LED strip with blue LED's and a ColdZero backplate and i only use it on events pure for the looks.

If I come across a DCII for <€300 i'll grab it just to play with it again smile.gif

Good! Just "cross back" to the green side! wink.gif

Cheers

Occamrazor
S.S.
(14 items)
 
  
CPUMotherboardGraphicsRAM
I5-3570K@5.0Ghz@1,4v ASUS MAXIMUS V GENE MSI 1080Ti Gaming X 16GB GSKILL RIPJAW X DDR3 1866MHZ (9-10-9-24) (... 
Hard DriveHard DriveCoolingOS
OCZ Agility 3 120GB + Toshiba A100 250GB Western Digital 2TB  Homemade WC (everything on water) ;) W10x64 
MonitorMonitorMonitorPower
ASUS VG278HE ASUS VG278HE ASUS VG278HE Silverstone Strider 1200W 
CaseAudio
Corsair 500R THX 500W 5.1 
  hide details  
Reply
S.S.
(14 items)
 
  
CPUMotherboardGraphicsRAM
I5-3570K@5.0Ghz@1,4v ASUS MAXIMUS V GENE MSI 1080Ti Gaming X 16GB GSKILL RIPJAW X DDR3 1866MHZ (9-10-9-24) (... 
Hard DriveHard DriveCoolingOS
OCZ Agility 3 120GB + Toshiba A100 250GB Western Digital 2TB  Homemade WC (everything on water) ;) W10x64 
MonitorMonitorMonitorPower
ASUS VG278HE ASUS VG278HE ASUS VG278HE Silverstone Strider 1200W 
CaseAudio
Corsair 500R THX 500W 5.1 
  hide details  
Reply
post #21034 of 24925
Quote:
Originally Posted by OccamRazor View Post

That is not our bios for sure...
You have to flash the same bios type as it came with your card:

A1 cards - 80.10.36/37/3A/39 bios
B1 cards - 80.80.xx.xx.xx

Even though all GK110 bios are basically the same (within each card type, as a KPE bios is substantially different than a reference 780 but intrinsically is the same) , most has specific brand/PCB or memory changes and to all non EVGA cards its best to keep the brand bios modded to avoid voiding your warranty!

i used the skyn3t 3a so how would i not be? Its a evga 780sc acx


edit: seems i used the one for the non SC 780 acx. would that cause my issues?
Edited by niketpla - 9/1/14 at 9:03am
Geaux Poverty
(19 items)
 
  
CPUMotherboardGraphicsRAM
4670k @ 4.7Ghz 1.3v asus z87-a GTX 780sc corsair xms3 12 gigs 1333  
Hard DriveHard DriveCoolingCooling
muskin 120gig SSD hitachi 1TB HDD EK-CoolStream PE 360 EK-Supreme LTX UNI CSQ 2013  
CoolingCoolingCoolingCooling
EK-DCP 2.2 X-RES incl. Pump EK-FC780 GTX Ti - Acetal  Alphacool nexxxos st30 240mm SP120 HP x2 
CoolingOSKeyboardPower
EK-FAN Silent 120-1600 RPM x3 windows 8.1 CM Storm QuickFire Rapid with browns CX750m 
CaseMouseAudio
NZXT H440 Logitech g9x SteelSeries Siberia v2 in black 
  hide details  
Reply
Geaux Poverty
(19 items)
 
  
CPUMotherboardGraphicsRAM
4670k @ 4.7Ghz 1.3v asus z87-a GTX 780sc corsair xms3 12 gigs 1333  
Hard DriveHard DriveCoolingCooling
muskin 120gig SSD hitachi 1TB HDD EK-CoolStream PE 360 EK-Supreme LTX UNI CSQ 2013  
CoolingCoolingCoolingCooling
EK-DCP 2.2 X-RES incl. Pump EK-FC780 GTX Ti - Acetal  Alphacool nexxxos st30 240mm SP120 HP x2 
CoolingOSKeyboardPower
EK-FAN Silent 120-1600 RPM x3 windows 8.1 CM Storm QuickFire Rapid with browns CX750m 
CaseMouseAudio
NZXT H440 Logitech g9x SteelSeries Siberia v2 in black 
  hide details  
Reply
post #21035 of 24925
Quote:
Originally Posted by OccamRazor View Post

Surprisingly? I think not! If you let a program run at boot with specific core/memory clock settings of course you should expect problems if you change variables all of a sudden!
Rule of the thumb after flashing when you encounter issues is to remove all OC programs or set the settings to default ( in all Riva Tuner developed clones from AB; PX, Oc guru, GPU tweak) deleting prifiles folder usually takes care of it, remove drivers with DDU ( Display Driver Uninstaller) http://www.guru3d.com/files-details/display-driver-uninstaller-download.html
re-install drivers, re-enable or re-install OC software! thumb.gif




Occamrazor

hmm good to know. thumb.gif
Geaux Poverty
(19 items)
 
  
CPUMotherboardGraphicsRAM
4670k @ 4.7Ghz 1.3v asus z87-a GTX 780sc corsair xms3 12 gigs 1333  
Hard DriveHard DriveCoolingCooling
muskin 120gig SSD hitachi 1TB HDD EK-CoolStream PE 360 EK-Supreme LTX UNI CSQ 2013  
CoolingCoolingCoolingCooling
EK-DCP 2.2 X-RES incl. Pump EK-FC780 GTX Ti - Acetal  Alphacool nexxxos st30 240mm SP120 HP x2 
CoolingOSKeyboardPower
EK-FAN Silent 120-1600 RPM x3 windows 8.1 CM Storm QuickFire Rapid with browns CX750m 
CaseMouseAudio
NZXT H440 Logitech g9x SteelSeries Siberia v2 in black 
  hide details  
Reply
Geaux Poverty
(19 items)
 
  
CPUMotherboardGraphicsRAM
4670k @ 4.7Ghz 1.3v asus z87-a GTX 780sc corsair xms3 12 gigs 1333  
Hard DriveHard DriveCoolingCooling
muskin 120gig SSD hitachi 1TB HDD EK-CoolStream PE 360 EK-Supreme LTX UNI CSQ 2013  
CoolingCoolingCoolingCooling
EK-DCP 2.2 X-RES incl. Pump EK-FC780 GTX Ti - Acetal  Alphacool nexxxos st30 240mm SP120 HP x2 
CoolingOSKeyboardPower
EK-FAN Silent 120-1600 RPM x3 windows 8.1 CM Storm QuickFire Rapid with browns CX750m 
CaseMouseAudio
NZXT H440 Logitech g9x SteelSeries Siberia v2 in black 
  hide details  
Reply
post #21036 of 24925
Quote:
Originally Posted by OccamRazor View Post

As i stated above, from all OC software that derived from Riva Tuner the only one being continuously developed is AfterBurner, PX also was supposedly revamped but ended up removed as it had serious issues!
The problem is Unwinder (Riva Tuner creator and AB developer only gives support in AB to reference cards and (of course as its sponsored by MSI gives support for non-reference MSI cards).
That leaves ALL other brands non-reference cards out in the cold, meaning you have to use GPU Tweak ot PX!

OR have a go with my guide as it might work for you card wit AB... wink.gif
Cheers

Occamrazor

If I recall, arnt asus direct cu2 series non reference?
post #21037 of 24925
Ok tried the one for 780sc for my bios and the same thing. PT still locked at 106 and on gpuz the default clock changes but shows im still have the stock clock and boost on. so the bios is taking just not taking... i assume its a mismatch? Another thing i did get one bios to work when i did it the first time and everything worked, OC worked great and all. it wasnt till it crashed on a benchmark that i started having issues like with the bios and the BSODs (which you explained already why;) ).

i mean my bios revision is 80.10.3A.00.80 and i have an evga 780sc acx. what would be the right bios then?
Edited by niketpla - 9/1/14 at 10:14am
Geaux Poverty
(19 items)
 
  
CPUMotherboardGraphicsRAM
4670k @ 4.7Ghz 1.3v asus z87-a GTX 780sc corsair xms3 12 gigs 1333  
Hard DriveHard DriveCoolingCooling
muskin 120gig SSD hitachi 1TB HDD EK-CoolStream PE 360 EK-Supreme LTX UNI CSQ 2013  
CoolingCoolingCoolingCooling
EK-DCP 2.2 X-RES incl. Pump EK-FC780 GTX Ti - Acetal  Alphacool nexxxos st30 240mm SP120 HP x2 
CoolingOSKeyboardPower
EK-FAN Silent 120-1600 RPM x3 windows 8.1 CM Storm QuickFire Rapid with browns CX750m 
CaseMouseAudio
NZXT H440 Logitech g9x SteelSeries Siberia v2 in black 
  hide details  
Reply
Geaux Poverty
(19 items)
 
  
CPUMotherboardGraphicsRAM
4670k @ 4.7Ghz 1.3v asus z87-a GTX 780sc corsair xms3 12 gigs 1333  
Hard DriveHard DriveCoolingCooling
muskin 120gig SSD hitachi 1TB HDD EK-CoolStream PE 360 EK-Supreme LTX UNI CSQ 2013  
CoolingCoolingCoolingCooling
EK-DCP 2.2 X-RES incl. Pump EK-FC780 GTX Ti - Acetal  Alphacool nexxxos st30 240mm SP120 HP x2 
CoolingOSKeyboardPower
EK-FAN Silent 120-1600 RPM x3 windows 8.1 CM Storm QuickFire Rapid with browns CX750m 
CaseMouseAudio
NZXT H440 Logitech g9x SteelSeries Siberia v2 in black 
  hide details  
Reply
post #21038 of 24925
msiafterburner /ri4,20,99" or "msiafterburner /ri3,20,99"

I ran the command prompt, and inserted both of these and no 41 on return. When i click enter, AB just opens up. Cant figure out how to unlock 1.3. If i try to add the lines for the profile, it says i don't have permission???
post #21039 of 24925
nevermind, noob here!
post #21040 of 24925
if im running at 1.3v, approximately how much of a power limit should i be at?
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: NVIDIA
Overclock.net › Forums › Graphics Cards › NVIDIA › [Official] NVIDIA GTX 780 Owner's Club