Inno3d GTX 780 iChill HerculeZ 3000.
Also, looking for a bit of advice on the oc:ing since I'm fairly new to it. OC:ed my previous card GTX 670 but this however seems a tad different.
Did a fresh install of win yesterday and quickly tried out the oc:ing. However the clock settings seems rather different than my previous card. This card comes factory oc:ed as you can see in the link in case you where'nt aware. Card is huge! 295mm long, so it was rather difficult to install. I now have 5mm between the card and my hdd bracket
Im quite impressed by the low noise it makes and with the 320.49 drivers it stays quite cool as well. Started out with Uninge Heaven and after about 1,5hr i managed to run the test on full-hd extreme x8 aa. Got an average fps of 61.8 if i remember correctly. This with +74Mhz on the core and +195Mhz on the mem. Boosted up to 1202Mhz and ~3295Mhz on the mem. Card stayed at 68 degrees with the fans on about 60% i think.
Alright, seems like i'm somewhere around what the card can do out of the box I thought. Next attempt, fire strike on extreme. Poff! Did four runs, crashed within one second but the last where i reverted it to stock. Can't remember what the last setting I used was, but no more than +35 on the core and mem at stock...
Havn't touched the volt. Also heard that in order to get the most out of the card a BIOS flash is necessary? I loved the 670 master guide to overclocking but couldnt find anything similar to the 780 so if anyone could help me out I'd be really happy!
Oh, side note. Running a 2500k @ 4,4Ghz atm with two ssd, two mechanical drives and this gpu with a Fractal Design Tesla 650W 80+ (not the r2). Is this enough power should i look into a more powerful psu? Thanks!