Originally Posted by friskiest
Really looking for some help here..
Switched off my pc last night as normal.
I did not turn it on again before work today, so I come home after work and switch it on.
System posts but there is no signal coming from the gpu. I tried switching to integrated, and I have signal fine.
I have two monitors connected to my 780 normally, neither of them would display anything, but my keyboard and mouse lit up as normal.
There was no error code on my M5E either.
I have a vanilla msi 780 with the TI bios and recently played around with 1.3v hack. It worked fine, this is the first time I have had any issues with it.
The card is watercooled, so before I start tearing my loop apart to test slots, i was wondering if any of you guys would be able to help me troubleshoot.
I am fearing the worst. Not sure RMA would work with a TI bios on it
If you can see the GPU with GPU-Z you still able to flash it back
Shut the pc down
Remove the 6/8 pin from the GPU.
Remove the psu cable
Press the power buttom in the rig to discharge psu and the rest in the circuit board.
Wait 30 sec "One minute is better"
Put the power cable back in psu
DON'T PUT THE 6/8 PIN BACK IN THE GPU.
turn on your rig open gpu-z look if you can see the 780 there.
Open Nvflash and flash it back to stock bios. " I mean stock bios"
got mobo UEFI set the GPU as a priority save/exit
boot into windows if you GPU is not damage it will work again with no issues and if you want to flash a vbios feel free.
Get back to me with results.
PS: the best community is where you can get support. you know what I mean. Edited by skyn3t - 9/11/13 at 4:08pm