Overclock.net › Forums › Cooling › Water Cooling › [Help]Some compatibility issues
New Posts  All Forums:Forum Nav:

[Help]Some compatibility issues

post #1 of 2
Thread Starter 
Hello guys! Newbie water cooler here, Wanting to ask some questions.

I've built a water cooled Cosmos S back in 2011 with a triple radiator on top. I was easy and simple and i had no problems.Now I want to upgrade To a TJ11 cooled by a quadruple radiator and i have my eyes set on the Alphacool NexXxoS Monsta Quad 140mm Radiator But my problem is it's 80mm thick . I've never seen a TJ11 computer case in real life so i don't know the dimensions and exact measurements that i need to take in order to install that radiator. My question is: Will it fit? I'll use a Corsair AX1200i as a PSU.


Here's the full build:
Asus Z87-DELUXE (when it comes out)
Intel Core I7 4770K (when it comes out)
Corsair Dominator Platinum 32GB 2400mhz
EVGA GTX 780 Hydrocopper (when it comes out) x2
Corsair AX1200i
Samsung Pro series 840 256GB
Seagate Barracuda 3TB 7200rpm

Water cooling parts:
Rad : Alphacool NexXxoS Monsta Quad 140mm 80mm thick
Res : Bitspower Water Tank Z-Multi 250 Inline Reservoir
Pump : Aquacomputer Aquastream XT USB Ultra_Version
Coolant : Mayhems Pastel Coolant Concentrate 250mL
Fittings : Enzotech G14 fittings
Fans : Akasa 140x25 VIPER PWM Fan with Hydro Dynamic Bearings
Tubing : Tygon R-3603 1/4 ID 3/8 OD

Any ideas about the CPU block? anything below 130$ would be appreciated.

And will i need a radiator shroud? those things are hard to find in my country.

Thanks in advance!
post #2 of 2
You do not need a radiator shroud (although they can help eliminate dead airspace). A CPU block really comes down to aesthetics and personal preference. Check out XSPC and or EK blocks, they tend to have some well performing and attractive blocks.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › [Help]Some compatibility issues