Overclock.net › Forums › Specialty Builds › Servers › Connect to PFsense (hyper-v) lan from Serv2012
New Posts  All Forums:Forum Nav:

Connect to PFsense (hyper-v) lan from Serv2012

post #1 of 2
Thread Starter 
Hello everyone.

I have not too long ago, built me a home server's whose purpose is to host various things, and it must provide internet to the rest of the house.

The server running Windows Server 2012 where the run PFsense through a Hyper-V solution. The server has 3 lan inputs where;

1 Is a Netgear WNDR3700 router where the house gets it's networks from. (192.168.9.2)
2 Is a 3G Internet connection from router. (192.168.3.1)
3 Is a ADSL Internet connection from a Zyxel router. (192.168.1.1)

In Pfsense it runs a DHCP server where outside of the virtual environment it has(192.168.3.99) and in the virtual environment it's (192.168.9.1). My problem is that I want the server to be able to grab our NAS server ip (192.168.9.97), but this is not possible since it is not possible to establish a connection to the NAS.
(However, it is possible for NAS and see the server.)

My question is how I can get the server into the Hyper-V virtual lan environment so it is possible to access the NAS? smile.gif
post #2 of 2
Thread Starter 
Just wanted to say I found a solution to my problem. Via Windows command line "route", is it possible for me to access the virtual network.

This video describes well what it is you need to do to get it and work.
http://www.youtube.com/watch?v=uOqBollh_x4

- Just if others should get the same idea as me in the future. smile.gif

Or if you want a simply solution u can connect the NAS or Server outside the virtuelle environment and thereby have access to it all over the network. smile.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Servers
Overclock.net › Forums › Specialty Builds › Servers › Connect to PFsense (hyper-v) lan from Serv2012