Overclock.net › Forums › Cooling › Water Cooling › Coollaboratory Liquid Ultra Thermal Paste question
New Posts  All Forums:Forum Nav:

Coollaboratory Liquid Ultra Thermal Paste question - Page 2

post #11 of 17
No, there's enough for at least 6 applications. I had enough to do my laptop's GPU, CPU, and VRM, plus two 3770k on die and on IHS, and still have some left over. I also spilled some accidentally too. doh.gif
post #12 of 17
Quote:
Originally Posted by sakerfalcon View Post

No, there's enough for at least 6 applications. I had enough to do my laptop's GPU, CPU, and VRM, plus two 3770k on die and on IHS, and still have some left over. I also spilled some accidentally too. doh.gif

Yep you can get a good amount of applications out of it. I got 10 out of mine. Just remember to use an extremely small amount. The stuff literally spreads like wildfire!!!
post #13 of 17
Thread Starter 
Ok that's brilliant, thanks again guys thumb.gif
post #14 of 17
IMHO it's not worth the hassle, as top-tier regular TIM, applied properly, will give results within a degree or two and without the hassles.

I actually get better temps from the 3770Ks I've delidded with PK1 than with CLU/CLP, with the former averaging about a 22C drop and the latter about 17C. I have applied it properly, and even done multiple mounts just to be sure.
I dodon't profess to know exactly why, but those are my experiences...
   
Z77 Bench-a-lot
(31 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K @ 4.92Ghz Asus Rampage 4 Extreme EVGA GTX670 FTW 2GB  EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 
GraphicsRAMHard DriveHard Drive
EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 16GB G.Skill Ripjaws-Z @ DDR3-2248 9-10-9-26 1T Samsung 830 256GB SSD WD10EZEX 1TB HDD 
Hard DriveHard DriveHard DriveHard Drive
WD10EALX 1TB HDD Seagate Barracuda 7200.14 1TB WD3200AAKS 320GB HDD WD5000HHTZ 10krpm 500GB VelociRaptor 
Optical DriveCoolingCoolingCooling
LG/Hitachi Slim DVD-R/W Custom MB-Backside VRM-sinks (Copper) 3x NZXT RF-FX140LB 1-2krpm 98.3CFM Case Fans 2x Corsair SP120-PE Case Fans 
CoolingCoolingCoolingCooling
Heatkiller GTX680 "Hole Edition" Block + Backplate XSPC Single-Bay Res (Single 5.25 bay) EK Multioption Res X2 - Advanced 150 DD "Fill-Port Res" + Fill-Port Fitting (Red) 
CoolingCoolingCoolingCooling
2x MCP35X + Heatsinks/80x15mm Fan XSPC EX420 Alphacool NeXXos UT60 240 6x Bgears Blasters 140mm 1800rpm Fans 
CoolingCoolingCoolingOS
4x Koolance 120x25mm 2600rpm Fans Comp/Rotary Fittings (BP/XSPC/Monsoon) Primoflex Pro LRT - White (1/2x3/4) Windows 7 Professional 64bit  
MonitorMonitorMonitorMonitor
Dell P2210Hb 21.5" 1920x1080p Viewsonic VA2012WB 20.1" LCD 1680x1050 Dell U3014 Eizo 27" 1440p 10bit RGB-LED Backlit AH-IPS Panel 
MonitorKeyboardPowerCase
55" LG HDTV (their top 2014 model) Ducky Mechanical (Browns) NZXT HALE90 850W + 8 blown-up AX1200/i's NZXT Switch 810 (White) 
MouseMouse PadAudioAudio
R.A.T.3 + MX510 My Desk GRADO RS1i Headphones Grado PS1000 Headphones 
OtherOtherOtherOther
Bitfenix Hydra Pro Fan Controller 5ch 30W/ch Bitfenix Alchemy Individually-Sleeved Extension... NZXT Individually-Sleeved Front Panel Wires (Bl... Phobya Sleeved 1x3pin-to-4x3pin Fan Splitter 
OtherOtherOther
Sleeved Wires w Paracord myself (no Heatshrink) Custom Front and Top Panels w HexxMesh *In Prog... Working on Custom Pedestal Prototype 
  hide details  
Reply
   
Z77 Bench-a-lot
(31 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K @ 4.92Ghz Asus Rampage 4 Extreme EVGA GTX670 FTW 2GB  EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 
GraphicsRAMHard DriveHard Drive
EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 16GB G.Skill Ripjaws-Z @ DDR3-2248 9-10-9-26 1T Samsung 830 256GB SSD WD10EZEX 1TB HDD 
Hard DriveHard DriveHard DriveHard Drive
WD10EALX 1TB HDD Seagate Barracuda 7200.14 1TB WD3200AAKS 320GB HDD WD5000HHTZ 10krpm 500GB VelociRaptor 
Optical DriveCoolingCoolingCooling
LG/Hitachi Slim DVD-R/W Custom MB-Backside VRM-sinks (Copper) 3x NZXT RF-FX140LB 1-2krpm 98.3CFM Case Fans 2x Corsair SP120-PE Case Fans 
CoolingCoolingCoolingCooling
Heatkiller GTX680 "Hole Edition" Block + Backplate XSPC Single-Bay Res (Single 5.25 bay) EK Multioption Res X2 - Advanced 150 DD "Fill-Port Res" + Fill-Port Fitting (Red) 
CoolingCoolingCoolingCooling
2x MCP35X + Heatsinks/80x15mm Fan XSPC EX420 Alphacool NeXXos UT60 240 6x Bgears Blasters 140mm 1800rpm Fans 
CoolingCoolingCoolingOS
4x Koolance 120x25mm 2600rpm Fans Comp/Rotary Fittings (BP/XSPC/Monsoon) Primoflex Pro LRT - White (1/2x3/4) Windows 7 Professional 64bit  
MonitorMonitorMonitorMonitor
Dell P2210Hb 21.5" 1920x1080p Viewsonic VA2012WB 20.1" LCD 1680x1050 Dell U3014 Eizo 27" 1440p 10bit RGB-LED Backlit AH-IPS Panel 
MonitorKeyboardPowerCase
55" LG HDTV (their top 2014 model) Ducky Mechanical (Browns) NZXT HALE90 850W + 8 blown-up AX1200/i's NZXT Switch 810 (White) 
MouseMouse PadAudioAudio
R.A.T.3 + MX510 My Desk GRADO RS1i Headphones Grado PS1000 Headphones 
OtherOtherOtherOther
Bitfenix Hydra Pro Fan Controller 5ch 30W/ch Bitfenix Alchemy Individually-Sleeved Extension... NZXT Individually-Sleeved Front Panel Wires (Bl... Phobya Sleeved 1x3pin-to-4x3pin Fan Splitter 
OtherOtherOther
Sleeved Wires w Paracord myself (no Heatshrink) Custom Front and Top Panels w HexxMesh *In Prog... Working on Custom Pedestal Prototype 
  hide details  
Reply
post #15 of 17
what material is the CPU i7 3770k IHS made out off? And i'm assuming that it doesnt damage the IHS once properly removed
post #16 of 17
It's nickel plated copper. Nickel doesn't get stained by the CLU, although on removal you will brush/polish away intels lettering.
post #17 of 17
I just want to add something I learned about CLU and CLP the curing thing is nothing but temp going below point of it being liquid simple cure for clean up is blow dryer low heat and warm the CPU / waterblock up slightly around 35c-38c and the stuff will wipe off like wiping off water on a windshield of a car and this trick stops the CPU and heatsink / waterblock getting stuck together very handy trick also for the one saying it is only a few degrees difference between regular TIM you are out of your mind this is liquid metal and has some of the highest heat transfer ability and regular TIM is atleast 4c-8c hotter trust me my 8350 at 5.2ghz x8 was cooking and almost in meltdown on custom liquid cooling with arctic cooling mx4 I added CLU and well it was nearly in safe range 90% of time.

The only one out there to compete with CLU and CLP is Indigo extreme and it is a metal like solder that melts and then fills the gap between CPU and heatsink/waterblock but the reflow temp requirement is to high for AMD bulldozer / piledriver so us AMD users are stuck with CLU and CLP.
Edited by rickcooperjr - 11/18/13 at 9:43am
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel I7 5820k 4.6ghz core 4.3ghz CPU cache 1.345v asus sabertooth X99 sold R9 290x's am currently running a R9 280A X... 16gb of ddr4 corsair vengeance LPX 3200mhz 1t 1... 
Hard DriveOptical DriveCoolingOS
M.2 Toshiba OCZ RD400 512gb ASUS DVD rw  liquid cooled cpu and gpu's windows 10 pro 64bit 
MonitorKeyboardPowerCase
3 x 32lcd/led 2560x1600 wolfking timberwolf EVGA supernova 1300w G2  Thermaltake core X9 
MouseMouse PadOther
steel series wow cataclysm 14button programable  wolfking sniper Intel PRO PT dual port PCIe server NIC 
  hide details  
Reply
My System
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel I7 5820k 4.6ghz core 4.3ghz CPU cache 1.345v asus sabertooth X99 sold R9 290x's am currently running a R9 280A X... 16gb of ddr4 corsair vengeance LPX 3200mhz 1t 1... 
Hard DriveOptical DriveCoolingOS
M.2 Toshiba OCZ RD400 512gb ASUS DVD rw  liquid cooled cpu and gpu's windows 10 pro 64bit 
MonitorKeyboardPowerCase
3 x 32lcd/led 2560x1600 wolfking timberwolf EVGA supernova 1300w G2  Thermaltake core X9 
MouseMouse PadOther
steel series wow cataclysm 14button programable  wolfking sniper Intel PRO PT dual port PCIe server NIC 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Coollaboratory Liquid Ultra Thermal Paste question