Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Case Mod Work Logs › [Scratch Build] PROT07YPE-OCN Exclusive Log
New Posts  All Forums:Forum Nav:

[Scratch Build] PROT07YPE-OCN Exclusive Log - Page 5

post #41 of 302

Put it in the top above the PSU!

Verktøy Cu
(20 items)
 
XForma MBX MKII
(18 items)
 
 
CPUCPUMotherboardGraphics
Intel Xeon E5-2670 V4 Intel Xeon E5-2670 V4 Asus Z10PE-D8 WS Nvidia Titan X 
GraphicsGraphicsGraphicsRAM
Nvidia Titan X Nvidia Titan X Nvidia Titan X 128GB of Kingston DDR4 ECC 2133Mhz 
Hard DriveHard DriveHard DriveHard Drive
Intel 750 NVME 1.2TB U.2 Intel 750 NVME 1.2TB AIC Intel 750 NVME 1.2TB AIC Intel 750 NVME 1.2TB AIC 
CoolingOSMonitorKeyboard
EK Water Blocks Windows 10 Pro Dell UP2715K Cherry MX 6.0 
PowerCaseMouseAudio
Corsair AX1500i Case Labs S8 Logitech MX Master Pioneer SE-L40 
CPUMotherboardGraphicsGraphics
Intel 5960X Asus Rampage V Extreme Nvidia Titan X Nvidia Titan X 
GraphicsRAMHard DriveHard Drive
Nvidia Titan X Corsair Dominator Platinum 4x8GB 2400Mhz (2) Intel 530 180GB (2) HGST 4TB 
Optical DriveCoolingOSMonitor
Blu-Ray Slot Load EK Water Blocks Liquid Cooling Windows 8.1 Dell UP2715K 
KeyboardPowerCaseMouse
Ducky OCN Blues Seasonic 1200W Platinum XForma MBX MKII TBD 
AudioAudio
Asus Xonar Essence One (2) Mackie MR5MK2 
  hide details  
Reply
Verktøy Cu
(20 items)
 
XForma MBX MKII
(18 items)
 
 
CPUCPUMotherboardGraphics
Intel Xeon E5-2670 V4 Intel Xeon E5-2670 V4 Asus Z10PE-D8 WS Nvidia Titan X 
GraphicsGraphicsGraphicsRAM
Nvidia Titan X Nvidia Titan X Nvidia Titan X 128GB of Kingston DDR4 ECC 2133Mhz 
Hard DriveHard DriveHard DriveHard Drive
Intel 750 NVME 1.2TB U.2 Intel 750 NVME 1.2TB AIC Intel 750 NVME 1.2TB AIC Intel 750 NVME 1.2TB AIC 
CoolingOSMonitorKeyboard
EK Water Blocks Windows 10 Pro Dell UP2715K Cherry MX 6.0 
PowerCaseMouseAudio
Corsair AX1500i Case Labs S8 Logitech MX Master Pioneer SE-L40 
CPUMotherboardGraphicsGraphics
Intel 5960X Asus Rampage V Extreme Nvidia Titan X Nvidia Titan X 
GraphicsRAMHard DriveHard Drive
Nvidia Titan X Corsair Dominator Platinum 4x8GB 2400Mhz (2) Intel 530 180GB (2) HGST 4TB 
Optical DriveCoolingOSMonitor
Blu-Ray Slot Load EK Water Blocks Liquid Cooling Windows 8.1 Dell UP2715K 
KeyboardPowerCaseMouse
Ducky OCN Blues Seasonic 1200W Platinum XForma MBX MKII TBD 
AudioAudio
Asus Xonar Essence One (2) Mackie MR5MK2 
  hide details  
Reply
post #42 of 302
Hey Neg, Chatting to you on FB.

Very nice design, if it was every to be produced for market you may want to look into adding 1 more PCI Slot, I only say this because on some MATX motherboards the Bottom PCI is the second 16x thus 99% of MATX cases wont allow a dual slot cooler.
Though if you plan to get a case like yours they would go watercooling and thus turn many reference cards into single slot. Hmmm

Anyway, Sign me up for one - Deffinatly if its MATX and UPSIDE DOWN! AMAZING
White Parvum
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 3770k GigaByte Sniper G1 M3 VTX3D HD 7990 DDR3 16GB 
Hard DriveHard DriveCoolingOS
128GB ADATA S511 2 x 1TB Samsung M8 Water Cooling. Alphacool / EK Windows 7 64bit 
MonitorMonitorKeyboardPower
Hazro 30" 2560x1600 YAMAKASI Catleap Q270 LED Logitech G19 XFX 1KW Platinum Pro 
CaseMouseMouse Pad
Parvum S1.0 Logitech G5 OCUK XXXL 
  hide details  
Reply
White Parvum
(15 items)
 
  
CPUMotherboardGraphicsRAM
Intel i7 3770k GigaByte Sniper G1 M3 VTX3D HD 7990 DDR3 16GB 
Hard DriveHard DriveCoolingOS
128GB ADATA S511 2 x 1TB Samsung M8 Water Cooling. Alphacool / EK Windows 7 64bit 
MonitorMonitorKeyboardPower
Hazro 30" 2560x1600 YAMAKASI Catleap Q270 LED Logitech G19 XFX 1KW Platinum Pro 
CaseMouseMouse Pad
Parvum S1.0 Logitech G5 OCUK XXXL 
  hide details  
Reply
post #43 of 302
Nice mATX design BNEG!

A thought about the on/off and reset buttons. What if you were able to make them touch sensitive instead of the normal press in buttons? Something like this:
post #44 of 302
Thread Starter 
Quote:
Originally Posted by MetallicAcid View Post

Nice mATX design BNEG!

A thought about the on/off and reset buttons. What if you were able to make them touch sensitive instead of the normal press in buttons? Something like this:

Nice!
Can you link me any vendors for this?
Edited by B NEGATIVE - 5/27/13 at 11:58am
MILSPEC II
(8 items)
 
| LUMO |
(6 items)
 
CLoS3 IMPACT
(8 items)
 
CPUMotherboardGraphicsGraphics
5820k X99m WS 980ti strix 980ti strix 
RAMHard DrivePowerCase
KLEVV Cras DDR4  3tb Red Corsair 600w SFX + 450w SFX Caselabs BH4 
CPUMotherboardGraphicsRAM
4970k Z97 Gryphon GTX 680 x2 Crucial Ballistix Elite 16Gb 
PowerCase
Be Quiet Dark Power 850 InWin D Frame Mini 
CPUMotherboardGraphicsRAM
i7 4770k ASUS Impact ITX R9 290 Gskill Trident 2400 
Hard DriveHard DriveCoolingCase
Samsung EV0 250 x2 WD black Loop.....oh yes...... Caselabs S3....modded 
  hide details  
Reply
MILSPEC II
(8 items)
 
| LUMO |
(6 items)
 
CLoS3 IMPACT
(8 items)
 
CPUMotherboardGraphicsGraphics
5820k X99m WS 980ti strix 980ti strix 
RAMHard DrivePowerCase
KLEVV Cras DDR4  3tb Red Corsair 600w SFX + 450w SFX Caselabs BH4 
CPUMotherboardGraphicsRAM
4970k Z97 Gryphon GTX 680 x2 Crucial Ballistix Elite 16Gb 
PowerCase
Be Quiet Dark Power 850 InWin D Frame Mini 
CPUMotherboardGraphicsRAM
i7 4770k ASUS Impact ITX R9 290 Gskill Trident 2400 
Hard DriveHard DriveCoolingCase
Samsung EV0 250 x2 WD black Loop.....oh yes...... Caselabs S3....modded 
  hide details  
Reply
post #45 of 302
I doubt it would be possible to make touch-buttons on a 5mm thick solid piece of aluminum.
The touch buttons in the picture are embedded in the see-through black plexi over the aluminum frame.

The only way I see touch-buttons being possible is by drilling a 1mm hole through and through (or a few nicely grouped in a circle) and put a proximity sensor behind it. Brush along it in front of the hole and the sensor will register something.

I think it would be a very OCD sensitive case by the way, with the PSU behind a window, lots of wiring and no place to hide it. Although, I bet that if you do custom wiring it can be done very neatly.
post #46 of 302
I tried looking, but was unable to find a complete that you would be able to purchase from a vendor. Instead, you would have to make it yourself. I will continue looking though!
post #47 of 302
Thread Starter 
Quote:
Originally Posted by Jetskyer View Post

I doubt it would be possible to make touch-buttons on a 5mm thick solid piece of aluminum.
The touch buttons in the picture are embedded in the see-through black plexi over the aluminum frame.

The only way I see touch-buttons being possible is by drilling a 1mm hole through and through (or a few nicely grouped in a circle) and put a proximity sensor behind it. Brush along it in front of the hole and the sensor will register something.

I think it would be a very OCD sensitive case by the way, with the PSU behind a window, lots of wiring and no place to hide it. Although, I bet that if you do custom wiring it can be done very neatly.

I want this to appeal to the obsessives,when its done right it will look impressive,only obsessive people tend to go that far.
I am going to cover the PSU by reshaping the window so i can put a dust filter on the intake.

I may even do away with the switches altogether and just have the Aquaero be the on/off,Maybe a back up on the back panel......
MILSPEC II
(8 items)
 
| LUMO |
(6 items)
 
CLoS3 IMPACT
(8 items)
 
CPUMotherboardGraphicsGraphics
5820k X99m WS 980ti strix 980ti strix 
RAMHard DrivePowerCase
KLEVV Cras DDR4  3tb Red Corsair 600w SFX + 450w SFX Caselabs BH4 
CPUMotherboardGraphicsRAM
4970k Z97 Gryphon GTX 680 x2 Crucial Ballistix Elite 16Gb 
PowerCase
Be Quiet Dark Power 850 InWin D Frame Mini 
CPUMotherboardGraphicsRAM
i7 4770k ASUS Impact ITX R9 290 Gskill Trident 2400 
Hard DriveHard DriveCoolingCase
Samsung EV0 250 x2 WD black Loop.....oh yes...... Caselabs S3....modded 
  hide details  
Reply
MILSPEC II
(8 items)
 
| LUMO |
(6 items)
 
CLoS3 IMPACT
(8 items)
 
CPUMotherboardGraphicsGraphics
5820k X99m WS 980ti strix 980ti strix 
RAMHard DrivePowerCase
KLEVV Cras DDR4  3tb Red Corsair 600w SFX + 450w SFX Caselabs BH4 
CPUMotherboardGraphicsRAM
4970k Z97 Gryphon GTX 680 x2 Crucial Ballistix Elite 16Gb 
PowerCase
Be Quiet Dark Power 850 InWin D Frame Mini 
CPUMotherboardGraphicsRAM
i7 4770k ASUS Impact ITX R9 290 Gskill Trident 2400 
Hard DriveHard DriveCoolingCase
Samsung EV0 250 x2 WD black Loop.....oh yes...... Caselabs S3....modded 
  hide details  
Reply
post #48 of 302

Search "tactile switch", lots of suppliers have them tho as already mentioned the trick will be finding one that works for your application without too much custom work.

 
Compact Splash
(16 items)
 
 
CPUMotherboardGraphicsRAM
Intel 3220 Intel DQ77KB Integrated. What. Corsair 1x8GB Laptop Memory 
Hard DriveOSPowerCase
Plextor 128GB mSata SSD Ubuntu Delta PA-5M10 None. 
CPUMotherboardGraphicsRAM
Intel i7-3770k @ 4.7GHz ASRock Z77E MITX EVGA GTX 570 HD 2.5GB G.Skill Ripjaws X 2133MHz 
Hard DriveCoolingCoolingCooling
Samsung 830 128GB SSD XSPC EX120 + EX240 XSPC Raystorm Copper EK FC570 GTX SE (rev. 1.1) 
CoolingCoolingCoolingCooling
Swiftech MCP35X pump 3x GT AP-15 fans Tecnofront nano res one million bitspower fittings 
OSMonitorPowerCase
Windows 7 Dell U2410 Silverstone ST45SF-G Scratch built 14.75L prototype 
CPUMotherboardRAMHard Drive
Intel i7-3770k @ 4.8GHz [DELIDDED] ASRock Z77E Samsung Low Voltage 2x4GB Crucial M4 128GB 
Hard DriveCoolingOSMonitor
WD 80GB 5400RPM Corsair H100i ubuntu 13.10 18" Dell Ultrasharp (4:3 Free Oldskool Edition) 
PowerCase
Silverstone ST45SF Compact Splash Prototype 
  hide details  
Reply
 
Compact Splash
(16 items)
 
 
CPUMotherboardGraphicsRAM
Intel 3220 Intel DQ77KB Integrated. What. Corsair 1x8GB Laptop Memory 
Hard DriveOSPowerCase
Plextor 128GB mSata SSD Ubuntu Delta PA-5M10 None. 
CPUMotherboardGraphicsRAM
Intel i7-3770k @ 4.7GHz ASRock Z77E MITX EVGA GTX 570 HD 2.5GB G.Skill Ripjaws X 2133MHz 
Hard DriveCoolingCoolingCooling
Samsung 830 128GB SSD XSPC EX120 + EX240 XSPC Raystorm Copper EK FC570 GTX SE (rev. 1.1) 
CoolingCoolingCoolingCooling
Swiftech MCP35X pump 3x GT AP-15 fans Tecnofront nano res one million bitspower fittings 
OSMonitorPowerCase
Windows 7 Dell U2410 Silverstone ST45SF-G Scratch built 14.75L prototype 
CPUMotherboardRAMHard Drive
Intel i7-3770k @ 4.8GHz [DELIDDED] ASRock Z77E Samsung Low Voltage 2x4GB Crucial M4 128GB 
Hard DriveCoolingOSMonitor
WD 80GB 5400RPM Corsair H100i ubuntu 13.10 18" Dell Ultrasharp (4:3 Free Oldskool Edition) 
PowerCase
Silverstone ST45SF Compact Splash Prototype 
  hide details  
Reply
post #49 of 302
I see. Well, I think it will look great, a lot great even. Seriously awesome project really.
I'm not a fan of the aquaero in the front though. The way it's so asymmetric doesn't appeal to me at all, but that's me.
Personally I'd go for the LT version and make it completely autonomous. For the power button I'd probably ditch one of the M3 screws in the front and alter it in such a way it becomes a button. That would be practically invisible and thus even sweeter. But I'm very minimalistic so my taste might not entirely go well with yours.
post #50 of 302
Hey Bneg, Thought about putting the buttons vertically next to the aquero like this


Also if it looked better you could make them square and in line with the edge of the aquero like so:
Current Rig
(13 items)
 
  
CPUMotherboardGraphicsGraphics
FX-8320 ASUS Crosshair V Formula-Z Sapphire HD7950 OC 3GB 21196-00 Sapphire HD7950 OC 3GB 21196-00 
RAMHard DriveHard DriveCooling
G.Skill Ripjaws-X DDR3 32GB 1600MHz Samsung 840 EVO 250GB SSD Western Digital Green 2Tb Custom Loop 
OSMonitorMonitorPower
Windows 7 Ultimate x64 Dell U2312HM Dell U2312HM Corsair AX1200 
Case
Corsair Obsidian 900D 
  hide details  
Reply
Current Rig
(13 items)
 
  
CPUMotherboardGraphicsGraphics
FX-8320 ASUS Crosshair V Formula-Z Sapphire HD7950 OC 3GB 21196-00 Sapphire HD7950 OC 3GB 21196-00 
RAMHard DriveHard DriveCooling
G.Skill Ripjaws-X DDR3 32GB 1600MHz Samsung 840 EVO 250GB SSD Western Digital Green 2Tb Custom Loop 
OSMonitorMonitorPower
Windows 7 Ultimate x64 Dell U2312HM Dell U2312HM Corsair AX1200 
Case
Corsair Obsidian 900D 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Case Mod Work Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Case Mod Work Logs › [Scratch Build] PROT07YPE-OCN Exclusive Log