Overclock.net › Forums › Graphics Cards › NVIDIA › NVIDIA Drivers and Overclocking Software › Overclocking GTX680 with water cooler
New Posts  All Forums:Forum Nav:

Overclocking GTX680 with water cooler

post #1 of 4
Thread Starter 
hello everyone

I need some guidnes about overclocking my gtx680 to the limits,

i did this mod :http://www.overclock.net/t/1394256/evga-gtx-680-with-corsair-h100i-the-mod

with H100i and thje temps are perfect for overclocking
and i flashed modified bios with voltage tables at 1.212V

when i try to make over clock above 1267MHZ the screen go black and then reset the settings.. (crash)
but the temps not so high..

what can i try to overclock more?

here is some pics ,if more needed please ask smile.gif


Edited by AsaGoren - 5/26/13 at 10:15am
post #2 of 4
Have you read this thread?
http://www.overclock.net/t/1265110/the-gtx-670-overclocking-master-guide

It is listed as the 670 oc thread but it still works for your 680. It made it easy for me to oc my card. Also every card is different, some oc a lot higher than others, and I think you will probably find you can oc your memory pretty well.
Ivy 5.0
(14 items)
 
Ivy 4.8
(15 items)
 
 
CPUMotherboardGraphicsRAM
i7-3770k 5.0 24/7 Maximus V Formula EVGA GTX 690 G.Skill Trident X 2400 (2x8gb) 
Hard DriveOptical DriveCoolingOS
Samsung 840 Pro 512GB Pioneer BD-RW Swiftech H220 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
2 x NEC 30" Logitech G15 Corsair AX1200 NZXT Switch 810 
MouseAudio
Logitech G9x Logitech G51 
  hide details  
Reply
Ivy 5.0
(14 items)
 
Ivy 4.8
(15 items)
 
 
CPUMotherboardGraphicsRAM
i7-3770k 5.0 24/7 Maximus V Formula EVGA GTX 690 G.Skill Trident X 2400 (2x8gb) 
Hard DriveOptical DriveCoolingOS
Samsung 840 Pro 512GB Pioneer BD-RW Swiftech H220 Windows 7 Ultimate 64 bit 
MonitorKeyboardPowerCase
2 x NEC 30" Logitech G15 Corsair AX1200 NZXT Switch 810 
MouseAudio
Logitech G9x Logitech G51 
  hide details  
Reply
post #3 of 4
You have a pretty good core clock, I've volt modded my 670FTW a bit and found that above around 1300core you get rapidly diminishing returns in single card setups (about 1350 for SLI).

I recommend pushing the memory as high as possible, you should be good for at least 6800 if not over7000. I have ffound tthat, unlike many cards, Kepler seems to benefit greatly from increased VRAMffrequency.
   
Z77 Bench-a-lot
(31 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K @ 4.92Ghz Asus Rampage 4 Extreme EVGA GTX670 FTW 2GB  EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 
GraphicsRAMHard DriveHard Drive
EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 16GB G.Skill Ripjaws-Z @ DDR3-2248 9-10-9-26 1T Samsung 830 256GB SSD WD10EZEX 1TB HDD 
Hard DriveHard DriveHard DriveHard Drive
WD10EALX 1TB HDD Seagate Barracuda 7200.14 1TB WD3200AAKS 320GB HDD WD5000HHTZ 10krpm 500GB VelociRaptor 
Optical DriveCoolingCoolingCooling
LG/Hitachi Slim DVD-R/W Custom MB-Backside VRM-sinks (Copper) 3x NZXT RF-FX140LB 1-2krpm 98.3CFM Case Fans 2x Corsair SP120-PE Case Fans 
CoolingCoolingCoolingCooling
Heatkiller GTX680 "Hole Edition" Block + Backplate XSPC Single-Bay Res (Single 5.25 bay) EK Multioption Res X2 - Advanced 150 DD "Fill-Port Res" + Fill-Port Fitting (Red) 
CoolingCoolingCoolingCooling
2x MCP35X + Heatsinks/80x15mm Fan XSPC EX420 Alphacool NeXXos UT60 240 6x Bgears Blasters 140mm 1800rpm Fans 
CoolingCoolingCoolingOS
4x Koolance 120x25mm 2600rpm Fans Comp/Rotary Fittings (BP/XSPC/Monsoon) Primoflex Pro LRT - White (1/2x3/4) Windows 7 Professional 64bit  
MonitorMonitorMonitorMonitor
Dell P2210Hb 21.5" 1920x1080p Viewsonic VA2012WB 20.1" LCD 1680x1050 Dell U3014 Eizo 27" 1440p 10bit RGB-LED Backlit AH-IPS Panel 
MonitorKeyboardPowerCase
55" LG HDTV (their top 2014 model) Ducky Mechanical (Browns) NZXT HALE90 850W + 8 blown-up AX1200/i's NZXT Switch 810 (White) 
MouseMouse PadAudioAudio
R.A.T.3 + MX510 My Desk GRADO RS1i Headphones Grado PS1000 Headphones 
OtherOtherOtherOther
Bitfenix Hydra Pro Fan Controller 5ch 30W/ch Bitfenix Alchemy Individually-Sleeved Extension... NZXT Individually-Sleeved Front Panel Wires (Bl... Phobya Sleeved 1x3pin-to-4x3pin Fan Splitter 
OtherOtherOther
Sleeved Wires w Paracord myself (no Heatshrink) Custom Front and Top Panels w HexxMesh *In Prog... Working on Custom Pedestal Prototype 
  hide details  
Reply
   
Z77 Bench-a-lot
(31 items)
 
CPUMotherboardGraphicsGraphics
i7 3930K @ 4.92Ghz Asus Rampage 4 Extreme EVGA GTX670 FTW 2GB  EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 
GraphicsRAMHard DriveHard Drive
EVGA GTX780Ti Classified K|ngp|n Edition @ 1483... 16GB G.Skill Ripjaws-Z @ DDR3-2248 9-10-9-26 1T Samsung 830 256GB SSD WD10EZEX 1TB HDD 
Hard DriveHard DriveHard DriveHard Drive
WD10EALX 1TB HDD Seagate Barracuda 7200.14 1TB WD3200AAKS 320GB HDD WD5000HHTZ 10krpm 500GB VelociRaptor 
Optical DriveCoolingCoolingCooling
LG/Hitachi Slim DVD-R/W Custom MB-Backside VRM-sinks (Copper) 3x NZXT RF-FX140LB 1-2krpm 98.3CFM Case Fans 2x Corsair SP120-PE Case Fans 
CoolingCoolingCoolingCooling
Heatkiller GTX680 "Hole Edition" Block + Backplate XSPC Single-Bay Res (Single 5.25 bay) EK Multioption Res X2 - Advanced 150 DD "Fill-Port Res" + Fill-Port Fitting (Red) 
CoolingCoolingCoolingCooling
2x MCP35X + Heatsinks/80x15mm Fan XSPC EX420 Alphacool NeXXos UT60 240 6x Bgears Blasters 140mm 1800rpm Fans 
CoolingCoolingCoolingOS
4x Koolance 120x25mm 2600rpm Fans Comp/Rotary Fittings (BP/XSPC/Monsoon) Primoflex Pro LRT - White (1/2x3/4) Windows 7 Professional 64bit  
MonitorMonitorMonitorMonitor
Dell P2210Hb 21.5" 1920x1080p Viewsonic VA2012WB 20.1" LCD 1680x1050 Dell U3014 Eizo 27" 1440p 10bit RGB-LED Backlit AH-IPS Panel 
MonitorKeyboardPowerCase
55" LG HDTV (their top 2014 model) Ducky Mechanical (Browns) NZXT HALE90 850W + 8 blown-up AX1200/i's NZXT Switch 810 (White) 
MouseMouse PadAudioAudio
R.A.T.3 + MX510 My Desk GRADO RS1i Headphones Grado PS1000 Headphones 
OtherOtherOtherOther
Bitfenix Hydra Pro Fan Controller 5ch 30W/ch Bitfenix Alchemy Individually-Sleeved Extension... NZXT Individually-Sleeved Front Panel Wires (Bl... Phobya Sleeved 1x3pin-to-4x3pin Fan Splitter 
OtherOtherOther
Sleeved Wires w Paracord myself (no Heatshrink) Custom Front and Top Panels w HexxMesh *In Prog... Working on Custom Pedestal Prototype 
  hide details  
Reply
post #4 of 4
Thread Starter 
Quote:
Originally Posted by justanoldman View Post

Have you read this thread?
http://www.overclock.net/t/1265110/the-gtx-670-overclocking-master-guide

It is listed as the 670 oc thread but it still works for your 680. It made it easy for me to oc my card. Also every card is different, some oc a lot higher than others, and I think you will probably find you can oc your memory pretty well.
thanks! i used this guide the long way and im tweaking 2 days already. i need your help see below
Quote:
Originally Posted by nleksan View Post

You have a pretty good core clock, I've volt modded my 670FTW a bit and found that above around 1300core you get rapidly diminishing returns in single card setups (about 1350 for SLI).

I recommend pushing the memory as high as possible, you should be good for at least 6800 if not over7000. I have ffound tthat, unlike many cards, Kepler seems to benefit greatly from increased VRAMffrequency.
took your advice and OC the memory! +500 was stable (on air) but crash after several hours.


ok so i try many tests and benchmarks and changed the bios several times and changed the max power consumption with KGB to 150% than i had to change the max power option in KGB to 200% and now i reach the top power consumption of 200%.

my question:
is it safe to modify the max power consumption option to higher value if the temps are alright? (it gets yellow line on the precision monitor)

Edited by AsaGoren - 5/28/13 at 12:18pm
New Posts  All Forums:Forum Nav:
  Return Home
Overclock.net › Forums › Graphics Cards › NVIDIA › NVIDIA Drivers and Overclocking Software › Overclocking GTX680 with water cooler