Overclock.net › Forums › Cooling › Water Cooling › Upgrade/Build Log
New Posts  All Forums:Forum Nav:

Upgrade/Build Log - Page 2

post #11 of 16
Maybe I'm just on a kick of liking this aesthetic, but I dig it when tubes are running in parallel, like I did in my loop (granted, it's only a CPU loop, but you get the idea):


If I were you, this is how I would run it. I used different color greys for the tubes. When they look like they come together, one is just behind the other.

I accidentally numbered it in descending order from the pump. So the loop would go:
pump, GPU, rad, CPU, res, pump

I would make use of your rubber cable routing slots, because those are underutilized in your build IMO. You can get some white cable ties and bind your tubes together to look like a single tube in any one place. This could, done right, clean your interior pretty nicely.

There'd be straight fittings on your GPU and rad, and 90s on your CPU. You would flip your rad and rotate your CPU block 90 degrees. If it doesn't let you, then use one 45 and one 90 fitting on there to give you the clearance.

2cents.gif but I think it could look slick.

(I just realized all this depends on being able to route tubes through the grommets. If you cant, then having them in parallel could still look slick. Heck, even running them on top of each other instead of one behind the other could look cool. I think it's a look that is rare in other builds.)

Maybe I'm crazy ha

E: typos
    
CPUMotherboardGraphicsRAM
Intel Core i5-3570K Ivy Bridge 3.4GHz (3.8GHz T... ASRock Z77 Extreme4-M LGA 1155 Intel Z77 HDMI S... EVGA 03G-P4-2664-KR GeForce GTX 660 3GB 192-bit... Kingston HyperX 10th Anniversary (4x4Gb) 
Hard DriveCoolingCoolingCooling
Kingston HyperX 3K SH103S3/120G 2.5" 120GB SATA... XSPC Dual 5.25" Bay Black Reservoir - with D5 V... Magicool Extreme 120mm x 30mm Slim  Black Norprene 1/2"OD 
CoolingMonitorKeyboardPower
EK Supremacy - Nickel  Dell 23" 1080p IBM Model M SeaSonic X750 Gold 750W ATX12V V2.3/EPS 12V V2.... 
CaseMouseMouse PadAudio
SilverStone Temjin Series TJ08B-E Black Aluminu... Razer Deathadder Xtrac Ripper XXL Ininity Primus P163 
AudioAudioAudioOther
Ininity Primus P163 Some old Yamaha 5.1 speaker with no HDMI support The mediocre 8" sub that came with the Yamaha r... Door desk 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core i5-3570K Ivy Bridge 3.4GHz (3.8GHz T... ASRock Z77 Extreme4-M LGA 1155 Intel Z77 HDMI S... EVGA 03G-P4-2664-KR GeForce GTX 660 3GB 192-bit... Kingston HyperX 10th Anniversary (4x4Gb) 
Hard DriveCoolingCoolingCooling
Kingston HyperX 3K SH103S3/120G 2.5" 120GB SATA... XSPC Dual 5.25" Bay Black Reservoir - with D5 V... Magicool Extreme 120mm x 30mm Slim  Black Norprene 1/2"OD 
CoolingMonitorKeyboardPower
EK Supremacy - Nickel  Dell 23" 1080p IBM Model M SeaSonic X750 Gold 750W ATX12V V2.3/EPS 12V V2.... 
CaseMouseMouse PadAudio
SilverStone Temjin Series TJ08B-E Black Aluminu... Razer Deathadder Xtrac Ripper XXL Ininity Primus P163 
AudioAudioAudioOther
Ininity Primus P163 Some old Yamaha 5.1 speaker with no HDMI support The mediocre 8" sub that came with the Yamaha r... Door desk 
  hide details  
Reply
post #12 of 16
Thread Starter 
Firstly, +rep for being a bro
Secondly, that build is slick man, I dig.

I get what you mean about the grommets, but tbh its such a clusterf*** back there I don't think i'll get tubing through the back frown.gif

I think my best option would be to take it apart and just play with it. I really want to keep the 2nd pump, but damn its inconvenient to place.
post #13 of 16
Sounds like you need cable ties, and lots of them. I planned my tubing first and made my cables work afterward.
thumb.gif
    
CPUMotherboardGraphicsRAM
Intel Core i5-3570K Ivy Bridge 3.4GHz (3.8GHz T... ASRock Z77 Extreme4-M LGA 1155 Intel Z77 HDMI S... EVGA 03G-P4-2664-KR GeForce GTX 660 3GB 192-bit... Kingston HyperX 10th Anniversary (4x4Gb) 
Hard DriveCoolingCoolingCooling
Kingston HyperX 3K SH103S3/120G 2.5" 120GB SATA... XSPC Dual 5.25" Bay Black Reservoir - with D5 V... Magicool Extreme 120mm x 30mm Slim  Black Norprene 1/2"OD 
CoolingMonitorKeyboardPower
EK Supremacy - Nickel  Dell 23" 1080p IBM Model M SeaSonic X750 Gold 750W ATX12V V2.3/EPS 12V V2.... 
CaseMouseMouse PadAudio
SilverStone Temjin Series TJ08B-E Black Aluminu... Razer Deathadder Xtrac Ripper XXL Ininity Primus P163 
AudioAudioAudioOther
Ininity Primus P163 Some old Yamaha 5.1 speaker with no HDMI support The mediocre 8" sub that came with the Yamaha r... Door desk 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core i5-3570K Ivy Bridge 3.4GHz (3.8GHz T... ASRock Z77 Extreme4-M LGA 1155 Intel Z77 HDMI S... EVGA 03G-P4-2664-KR GeForce GTX 660 3GB 192-bit... Kingston HyperX 10th Anniversary (4x4Gb) 
Hard DriveCoolingCoolingCooling
Kingston HyperX 3K SH103S3/120G 2.5" 120GB SATA... XSPC Dual 5.25" Bay Black Reservoir - with D5 V... Magicool Extreme 120mm x 30mm Slim  Black Norprene 1/2"OD 
CoolingMonitorKeyboardPower
EK Supremacy - Nickel  Dell 23" 1080p IBM Model M SeaSonic X750 Gold 750W ATX12V V2.3/EPS 12V V2.... 
CaseMouseMouse PadAudio
SilverStone Temjin Series TJ08B-E Black Aluminu... Razer Deathadder Xtrac Ripper XXL Ininity Primus P163 
AudioAudioAudioOther
Ininity Primus P163 Some old Yamaha 5.1 speaker with no HDMI support The mediocre 8" sub that came with the Yamaha r... Door desk 
  hide details  
Reply
post #14 of 16
Thread Starter 
Got my redesign planned, may as well turn this into a mini build log!

Going from a bay res to a tube res, adding in a EX240 and some other goodies. Stay tuned!
post #15 of 16
That should be good. You can use your favorite pump and skip the whole bay setup (lots of folks don't like it). Good luck!
    
CPUMotherboardGraphicsRAM
Intel Core i5-3570K Ivy Bridge 3.4GHz (3.8GHz T... ASRock Z77 Extreme4-M LGA 1155 Intel Z77 HDMI S... EVGA 03G-P4-2664-KR GeForce GTX 660 3GB 192-bit... Kingston HyperX 10th Anniversary (4x4Gb) 
Hard DriveCoolingCoolingCooling
Kingston HyperX 3K SH103S3/120G 2.5" 120GB SATA... XSPC Dual 5.25" Bay Black Reservoir - with D5 V... Magicool Extreme 120mm x 30mm Slim  Black Norprene 1/2"OD 
CoolingMonitorKeyboardPower
EK Supremacy - Nickel  Dell 23" 1080p IBM Model M SeaSonic X750 Gold 750W ATX12V V2.3/EPS 12V V2.... 
CaseMouseMouse PadAudio
SilverStone Temjin Series TJ08B-E Black Aluminu... Razer Deathadder Xtrac Ripper XXL Ininity Primus P163 
AudioAudioAudioOther
Ininity Primus P163 Some old Yamaha 5.1 speaker with no HDMI support The mediocre 8" sub that came with the Yamaha r... Door desk 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
Intel Core i5-3570K Ivy Bridge 3.4GHz (3.8GHz T... ASRock Z77 Extreme4-M LGA 1155 Intel Z77 HDMI S... EVGA 03G-P4-2664-KR GeForce GTX 660 3GB 192-bit... Kingston HyperX 10th Anniversary (4x4Gb) 
Hard DriveCoolingCoolingCooling
Kingston HyperX 3K SH103S3/120G 2.5" 120GB SATA... XSPC Dual 5.25" Bay Black Reservoir - with D5 V... Magicool Extreme 120mm x 30mm Slim  Black Norprene 1/2"OD 
CoolingMonitorKeyboardPower
EK Supremacy - Nickel  Dell 23" 1080p IBM Model M SeaSonic X750 Gold 750W ATX12V V2.3/EPS 12V V2.... 
CaseMouseMouse PadAudio
SilverStone Temjin Series TJ08B-E Black Aluminu... Razer Deathadder Xtrac Ripper XXL Ininity Primus P163 
AudioAudioAudioOther
Ininity Primus P163 Some old Yamaha 5.1 speaker with no HDMI support The mediocre 8" sub that came with the Yamaha r... Door desk 
  hide details  
Reply
post #16 of 16
Thread Starter 
Case is currently naked and new parts are here.

Soon my pretties.

Soon.

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Upgrade/Build Log