Originally Posted by kame1986
not to sound dumb but was looking at the pic of
"http://sidewindercomputers.com/swh2edukit.html" and once fitted how the hell do u access ir PCI slots etc !!
no its not a dumb question. But I see why your saying that now that I look at your case. When you put that little rad box jig on your exhaust fan you are suppose to mount the radiator on that. But in your case its a problem because your case doesn't look like a full tower. So if you mount the radiator's top section to the rad box it hands over your PCI slots. If you mount it the other way around the heat off the psu can escape and it heats up the radiator.
Sadly since your case is smaller. You are stuck using a single 120mm radiator or you gota do some cutting on your case to fit the bigger one. maybe if you use 2 single 120mm radiators in a row you can achieve the cooling of a 2x120mm radiator and get away with not cutting. It will add a little resistance in your loop but I bet it would work. If you did this get a high cfm fan to blow through them in sequence like that.