Back from the metal shop, so here we go with another update!
Got my hands on the 3 VESA mounts and they are a lot more flexible that I would thought they would be.
All the parts laid out
After a quick bit of sanding to smooth out all the rough edges, all the pieces are cut to length, one 22" main bar, two 18" arms, and two 12" supports.
The ends of the aluminum did not come tapped for the hinges, so a little WD-40, power drill and hand drill, we had our tapped holes.
All put together, except for the VESA Mounts.
I didn't have any extra T-Nuts that would normally come with the 80/20, so I had to improvise. It worked quiet well.
Lastly I drilled 4 3/8" holes in the supports for mounting to the desk.
So now comes the fun part, mounting it to the desk itself! Will be back later tonight with another update!