Overclock.net › Forums › AMD › AMD Motherboards › [KAVERI APU] AMD Socket FM2+ - Guide and discussion
New Posts  All Forums:Forum Nav:

[KAVERI APU] AMD Socket FM2+ - Guide and discussion - Page 63

Poll Results: Which motherboard manufacturer will you be choosing for Socket FM2+?

 
  • 38% (107)
    GIGABYTE
  • 23% (67)
    ASUS
  • 25% (72)
    ASRock
  • 8% (23)
    MSI
  • 2% (8)
    Biostar
  • 0% (1)
    ECS
  • 0% (2)
    Other
280 Total Votes  
post #621 of 1158
As AlphaC has said why not use the BIOS? Usually just as easy to do if not easier as they will have a brief description of the options on the right.
post #622 of 1158
Quote:
Originally Posted by AlphaC View Post


You can overclock iGPU from the BIOS also.



I'm fairly certain iGPU voltage is tied to Northbridge voltage.

Dynamic Vcore is basically the offset for when it clocks up/down.

As far as overclocking the iGPU goes, 1095 seems the average on hwbot http://hwbot.org/hardware/videocards#key=radeon_hd_8670d

although a bunch of reviewers have been seen to hit 1000Mhz or so with a NB bumped to 1.3V

Thanks a lot. smile.gif Does make sense that it would be tied to the NB. I'll just keep pushing then. thumb.gif



Quote:
Originally Posted by void View Post

As AlphaC has said why not use the BIOS? Usually just as easy to do if not easier as they will have a brief description of the options on the right.

Yup, I prefer the BIOS over software. I was just looking for something called APU VDD Voltage, but I couldn't find it there. The only good thing about EasyTune 6 is that it shows the correct temperatures.
Oxygène
(16 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 5 1600 Asus Prime B350 Plus VTX3D R9 390 8GB G.Skill Ripjaws  
Hard DriveHard DriveHard DriveHard Drive
Kingston Hyper X Kingston HyperX Fury ADATA SP550 ADATA SX8000 
CoolingOSMonitorKeyboard
Stock Windows 10 Dell U2711 Razer BlackWidow Tournament Edition 
PowerCaseMouseMouse Pad
Chieftec A-135 Series 1000W NZXT. Phantom 410 Razer DeathAdder Razer Goliathus Speed Edition 
  hide details  
Reply
Oxygène
(16 items)
 
  
CPUMotherboardGraphicsRAM
Ryzen 5 1600 Asus Prime B350 Plus VTX3D R9 390 8GB G.Skill Ripjaws  
Hard DriveHard DriveHard DriveHard Drive
Kingston Hyper X Kingston HyperX Fury ADATA SP550 ADATA SX8000 
CoolingOSMonitorKeyboard
Stock Windows 10 Dell U2711 Razer BlackWidow Tournament Edition 
PowerCaseMouseMouse Pad
Chieftec A-135 Series 1000W NZXT. Phantom 410 Razer DeathAdder Razer Goliathus Speed Edition 
  hide details  
Reply
post #623 of 1158
Quote:
Originally Posted by AlphaC View Post


You can overclock iGPU from the BIOS also.



I'm fairly certain iGPU voltage is tied to Northbridge voltage.

Dynamic Vcore is basically the offset for when it clocks up/down.

As far as overclocking the iGPU goes, 1095 seems the average on hwbot http://hwbot.org/hardware/videocards#key=radeon_hd_8670d

although a bunch of reviewers have been seen to hit 1000Mhz or so with a NB bumped to 1.3V

1035 with stock clocks and stock cooler no problem, with G1 Sniper A88X
although I went a tad over 1095



Mmmmmm 1450 smile.gif

    
CPUMotherboardGraphicsRAM
2600k, 2700k, 34 lga 775 chippers z68x-ud4, MIVE, Commando's, and crap FX5500, 6970, 6670, 4890, and junk Team D9's/ Ballistix D9's, Muskin Hypers !! 
Hard DriveOptical DriveOSMonitor
C300 / WD 500 / 640 Caviar Blue Asus Lightscribe / LG Win7/Vista/XP/Server 08 EE Acer P235H 1920 X 1080 HD 
KeyboardPowerCaseMouse
Logitech Ill. Mushkin 1200 Joule CM690 II Adv/Tech Bench DiamondBack 3G 
Mouse Pad
eXactMat 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
2600k, 2700k, 34 lga 775 chippers z68x-ud4, MIVE, Commando's, and crap FX5500, 6970, 6670, 4890, and junk Team D9's/ Ballistix D9's, Muskin Hypers !! 
Hard DriveOptical DriveOSMonitor
C300 / WD 500 / 640 Caviar Blue Asus Lightscribe / LG Win7/Vista/XP/Server 08 EE Acer P235H 1920 X 1080 HD 
KeyboardPowerCaseMouse
Logitech Ill. Mushkin 1200 Joule CM690 II Adv/Tech Bench DiamondBack 3G 
Mouse Pad
eXactMat 
  hide details  
Reply
post #624 of 1158
A-ha!

A88XM Gaming - mATX
Unnamed A88X -mITX (Of course, no DP)
AM11 -mITX for Kabini
Edited by JSTe - 1/7/14 at 3:59am
post #625 of 1158
Quote:
Originally Posted by JSTe View Post

A-ha!

A88XM Gaming - ATX
Unnamed A88X -mITX (Of course, no DP)
AM11 -mITX for Kabini

A88XM is mATX
post #626 of 1158
Quote:
Originally Posted by nitrubbb View Post

A88XM is mATX

Something along the lines of too big.
post #627 of 1158
Good to see another itx board cause we need more than the two that are currently available. I'm interested in the MSI version for sure.
post #628 of 1158
Quote:
Originally Posted by iRUSH View Post

Good to see another itx board cause we need more than the two that are currently available. I'm interested in the MSI version for sure.

Only problems I have with this are the following:

- Doesn't really offer anything outside the current offerings
- When is it going to be available? I'm not going to wait a mobo to become available a month after the APU's are out

As for me, I've decided to go with the Asrock ITX one. If more compelling ones become available later, I might change.
post #629 of 1158
Quote:
Originally Posted by JSTe View Post

Only problems I have with this are the following:

- Doesn't really offer anything outside the current offerings
- When is it going to be available? I'm not going to wait a mobo to become available a month after the APU's are out

As for me, I've decided to go with the Asrock ITX one. If more compelling ones become available later, I might change.

I like the layout of ASRock's the best but I wish it had a VRM heatsink. I wonder if it'll limit its overclock?
post #630 of 1158
You can always DYI.

I'm underclocking/undervolting anyway, so it shouldn't matter much.

Though I do have some leftover heatsinks and thermal tape...
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD Motherboards
Overclock.net › Forums › AMD › AMD Motherboards › [KAVERI APU] AMD Socket FM2+ - Guide and discussion