Overclock.net › Forums › Distributed Computing › Distributed Computing - General › [Official] BitCoin LiteCoin DigitalCoin and all Crypto Currencies Club And General Information Thread
New Posts  All Forums:Forum Nav:

[Official] BitCoin LiteCoin DigitalCoin and all Crypto Currencies Club And General Information Thread - Page 1067

post #10661 of 22496
Quote:
Originally Posted by utnorris View Post

So you tried just one card and nothing? If that does work, then add a second card, then a third and so forth. If you add the second, third and fourth card and some do not get detected, try enabling CF and to see if it activates the cards, then deactivate it. But you need to start with the basics, remove all but one stick of ram, one card and nothing else. See if it boots to the bios. If it does add in the HD and see if you make it into Windows. If you get there and no issues, add one stick of ram, boot to Windows. If all is well at this point, repeat until it doesn't boot into Windows and then you will know what the issue is. Time consuming? Yes. Effective? Yes.

Okay, so I am only running one stick of RAM. I disconnected the SATA data cable to the hard drive. Tried turning the machine on with only card one installed using the riser, no display but I get code AE which means: Boot to Legacy OS. That means it is waiting for you to put in Windows 7 CD however, the monitor reads "No Display Input" when I turn it off and on. Okay, move on to ONLY card 2 plugged in, same story. Move on to card 3, same story, card 4, same story and finally card 5, same story.

Is it possible that ALL of the risers are dead? I think that would be statistically impossible. Granted these things did come from China but again, I don't think it is statistically possible that ALL of the risers I ordered are dead. I ordered an X16 to X16 riser out of frustration last night. Would see if that fixes things. The new ASRock board is coming in Thursday, will also try with that.

Any other ideas considering that I can't get display through ANY of the cards on risers. All of these cards work without risers. Maybe it is the risers... time to spend more money I guess frown.gif
MurderMac
(1 item)
 
Schwarz Nickel
(11 items)
 
Project mATX
(11 items)
 
Case
Apple Power Mac G5 
CPUMotherboardGraphicsGraphics
Intel Xeon E5 2660 V1 ASUS Rampage Gene X79 PNY GTX 970 PNY GTX 970 
RAMHard DriveCoolingOS
Klevv Fit 16GB SanDisk 120GB Extreme SSD Custom EK Watercooling Loop Windows 10 
MonitorPowerCase
Dell U1525H SilverStone 600w SFX Project mATX 
  hide details  
Reply
MurderMac
(1 item)
 
Schwarz Nickel
(11 items)
 
Project mATX
(11 items)
 
Case
Apple Power Mac G5 
CPUMotherboardGraphicsGraphics
Intel Xeon E5 2660 V1 ASUS Rampage Gene X79 PNY GTX 970 PNY GTX 970 
RAMHard DriveCoolingOS
Klevv Fit 16GB SanDisk 120GB Extreme SSD Custom EK Watercooling Loop Windows 10 
MonitorPowerCase
Dell U1525H SilverStone 600w SFX Project mATX 
  hide details  
Reply
post #10662 of 22496
Quote:
Originally Posted by Darth Scabrous View Post

Guys, just telling people that mcxnow is back up! Get a MCXFee as soon as possible, before it shoots up.

If I'm reading their site correctly you just deposit your BTC and get interest on it? How legit is this site? Do you use it?
post #10663 of 22496
So I have 2 290x's waiting for pickup which I've spent $1219 on. If I'm paying 0.11 per kwh (less but want a worst case scenario) how long would it take for me to get that money back in todays market?
post #10664 of 22496
Yay! Great news! I moved one of the cards to the first PCIe slot with no risers, it booted into the BIOS just fine. Plugged in the hard drive and it booted into Windows just fine. So I turned the computer off and plugged in the other four cards. It booted! Once I was logged in, it installed the drivers. However, four out of five cards are detected. Card 4 (#5) is not detected. So I am close!

They are getting about 580-600kHash/s each but that is probably because I am running 4GB instead of 8GB. The other stick should be back from RMA sometime this week.

Okay, I'm feeling better. Do I need to update to Windows 8 for more than 4 cards? I thought Windows 7 had no issues? Ah well, currently working with 2.4mHash!

Jeffinslaw
MurderMac
(1 item)
 
Schwarz Nickel
(11 items)
 
Project mATX
(11 items)
 
Case
Apple Power Mac G5 
CPUMotherboardGraphicsGraphics
Intel Xeon E5 2660 V1 ASUS Rampage Gene X79 PNY GTX 970 PNY GTX 970 
RAMHard DriveCoolingOS
Klevv Fit 16GB SanDisk 120GB Extreme SSD Custom EK Watercooling Loop Windows 10 
MonitorPowerCase
Dell U1525H SilverStone 600w SFX Project mATX 
  hide details  
Reply
MurderMac
(1 item)
 
Schwarz Nickel
(11 items)
 
Project mATX
(11 items)
 
Case
Apple Power Mac G5 
CPUMotherboardGraphicsGraphics
Intel Xeon E5 2660 V1 ASUS Rampage Gene X79 PNY GTX 970 PNY GTX 970 
RAMHard DriveCoolingOS
Klevv Fit 16GB SanDisk 120GB Extreme SSD Custom EK Watercooling Loop Windows 10 
MonitorPowerCase
Dell U1525H SilverStone 600w SFX Project mATX 
  hide details  
Reply
post #10665 of 22496
Quote:
Originally Posted by wholeeo View Post

So I have 2 290x's waiting for pickup which I've spent $1219 on. If I'm paying 0.11 per kwh (less but want a worst case scenario) how long would it take for me to get that money back in todays market?

You might pull anywhere from $15-30 a day depending on the market.
post #10666 of 22496
Quote:
Originally Posted by revro View Post

http://www.fast-pool.com
the page sometimes drops to text mode but its all there and counting and adding doges, really nice pool.
also i am getting on doge around 500khash on my 780 with following bat
cudaminer.exe -H 1 -i 0 -l auto -C 1 -o stratum+tcp://fast-pool.com:3333 -O

best
revro

+1 to fast-pool.com

I diffidently feel the payout is better on this pool. The pool haven't went down once since I joined if you can get past there frontend webpage going down sporadically.

Getting average 750khash on my 780ti which is quite nice. Also keeps my room warm instead of using a heater. XD
Main Rig
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 4770k Asus Maxiumus VI Formula Evga 780 Ti Classified Trident 16GB 2400mhz 
Hard DriveHard DriveHard DriveCooling
Sandisk Extreme Sandisk Extreme Plextor M5P Custom Water Loop 
OSMonitorPowerCase
Windows 8.1 Pro Crossover Corsair Axi 1200 NZXT 810 Phantom 
MouseAudioAudio
Logitech G9 Fiio E17 HD650 
  hide details  
Reply
Main Rig
(15 items)
 
  
CPUMotherboardGraphicsRAM
i7 4770k Asus Maxiumus VI Formula Evga 780 Ti Classified Trident 16GB 2400mhz 
Hard DriveHard DriveHard DriveCooling
Sandisk Extreme Sandisk Extreme Plextor M5P Custom Water Loop 
OSMonitorPowerCase
Windows 8.1 Pro Crossover Corsair Axi 1200 NZXT 810 Phantom 
MouseAudioAudio
Logitech G9 Fiio E17 HD650 
  hide details  
Reply
post #10667 of 22496
Quote:
Originally Posted by chronicfx View Post

You might pull anywhere from $15-30 a day depending on the market.

So am I correct to assume worst case scenario 3-4 months?
post #10668 of 22496
Opinions?

http://www.amazon.com/Bitmain-AntMiner-Blade-Bitcoin-Miner/dp/B00HL4MEG6/ref=pd_sim_sbs_e_5

That would be 180,000mHash or about $40 a day on just Bitcoins.

Jeffinslaw
MurderMac
(1 item)
 
Schwarz Nickel
(11 items)
 
Project mATX
(11 items)
 
Case
Apple Power Mac G5 
CPUMotherboardGraphicsGraphics
Intel Xeon E5 2660 V1 ASUS Rampage Gene X79 PNY GTX 970 PNY GTX 970 
RAMHard DriveCoolingOS
Klevv Fit 16GB SanDisk 120GB Extreme SSD Custom EK Watercooling Loop Windows 10 
MonitorPowerCase
Dell U1525H SilverStone 600w SFX Project mATX 
  hide details  
Reply
MurderMac
(1 item)
 
Schwarz Nickel
(11 items)
 
Project mATX
(11 items)
 
Case
Apple Power Mac G5 
CPUMotherboardGraphicsGraphics
Intel Xeon E5 2660 V1 ASUS Rampage Gene X79 PNY GTX 970 PNY GTX 970 
RAMHard DriveCoolingOS
Klevv Fit 16GB SanDisk 120GB Extreme SSD Custom EK Watercooling Loop Windows 10 
MonitorPowerCase
Dell U1525H SilverStone 600w SFX Project mATX 
  hide details  
Reply
post #10669 of 22496
Hey guys I'm new to mining and I'm having trouble, I would love some help over Here !!!


Thanks a lot
post #10670 of 22496
Quote:
Originally Posted by Jeffinslaw View Post

Yay! Great news! I moved one of the cards to the first PCIe slot with no risers, it booted into the BIOS just fine. Plugged in the hard drive and it booted into Windows just fine. So I turned the computer off and plugged in the other four cards. It booted! Once I was logged in, it installed the drivers. However, four out of five cards are detected. Card 4 (#5) is not detected. So I am close!

They are getting about 580-600kHash/s each but that is probably because I am running 4GB instead of 8GB. The other stick should be back from RMA sometime this week.

Okay, I'm feeling better. Do I need to update to Windows 8 for more than 4 cards? I thought Windows 7 had no issues? Ah well, currently working with 2.4mHash!

Jeffinslaw

I apologize, I should have been clear when I said to start with the bare minimum meaning don't use the risers. When you say it is seeing the other cards, are you using the risers? The way you need to be doing this is, plug in a card into the MB and see if it sees it. You want to eliminate the cards as being the issue, so if they all will boot into windows while in the first PCIe slot, then you know the cards are good. Move on to adding a second card in a PCIe slot and repeat until you do not have any PCIe slots available, for example, if the MB can hold 4 cards (no risers) then work up to that. Once you have done that, you now know the MB and the video cards are good which leaves just the PCIe risers. Now you work through them, one at a time and verify all of them work, then you move on to using two of them, then three, make sense? You should also be doing all this at default BIOS settings. Hopefully that helps.

Quote:
Originally Posted by wholeeo View Post

So I have 2 290x's waiting for pickup which I've spent $1219 on. If I'm paying 0.11 per kwh (less but want a worst case scenario) how long would it take for me to get that money back in todays market?

If you are mining 24/7 which would be anywhere from $20-#0 a day from Middlecoin, you are looking at anywhere from $600 to $900 a month, minus electric costs which should be about $60, so roughly 2 months and you have paid for your cards.
Edited by utnorris - 1/28/14 at 5:49pm
Gaming Rig
(19 items)
 
 
New Custom Case
(3 photos)
CPUMotherboardGraphicsGraphics
8350 Asus 990fx Sabertooth Diamond hd7970 Diamond HD7970 
RAMHard DriveHard DriveHard Drive
Gskill Ripjaws OCZ Agility 3  2Tb Seagate Sata3 3Tb Western Digital Green Drive 
Optical DriveCoolingCoolingCooling
LG Bluray Burner Swiftech HD Koolance MVR-100 Koolance CHC-125 
CoolingCoolingCoolingOS
Swiftech MC35x2 with dual top Feser Triple 120 Radiator Corsair SP120 Quiet x 3 Windows 7 Ultimate x64 
PowerCase
Corsair AX750 CaseLabs M8 
  hide details  
Reply
Gaming Rig
(19 items)
 
 
New Custom Case
(3 photos)
CPUMotherboardGraphicsGraphics
8350 Asus 990fx Sabertooth Diamond hd7970 Diamond HD7970 
RAMHard DriveHard DriveHard Drive
Gskill Ripjaws OCZ Agility 3  2Tb Seagate Sata3 3Tb Western Digital Green Drive 
Optical DriveCoolingCoolingCooling
LG Bluray Burner Swiftech HD Koolance MVR-100 Koolance CHC-125 
CoolingCoolingCoolingOS
Swiftech MC35x2 with dual top Feser Triple 120 Radiator Corsair SP120 Quiet x 3 Windows 7 Ultimate x64 
PowerCase
Corsair AX750 CaseLabs M8 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Distributed Computing - General
Overclock.net › Forums › Distributed Computing › Distributed Computing - General › [Official] BitCoin LiteCoin DigitalCoin and all Crypto Currencies Club And General Information Thread