A LOT have happened since my last update, so can´t write down everything else at once so be patient
First of I had to finish the motherboard cable and PCIe cables that have been bugging me for a long time, they were way way too long.
Here you see what I started with and the length I made it.
Another minor update in between all the sleeving, just to get my hands and mind off and do something a little easier, stickers!
A little teaser of the front panel too:
I have completely forgot to show what I did on the front panel in the beginning, the actual very first thing I did on this build!
Took a heatgun and heated the front until it was untouchable (pure aluminum heat up very well), the to a pencil and pushed trough the tiny hole behind the original NoFan logo until it popped off.
Then inverted it, because it already had the right size and depth to fit in the hole and because the backside is clean flat were the front had letters sticking out a few mm (would look terrible if I covered the lettering in vinyl).
A little epoxy and some carbon vinyl and voila, a clean flat front.
Sorry have no pictures of it because it was before I received my little blue camera, and I hate my iPhone cam so rarely use it.
Enough talk, here it is - the finished motherboard short cable in black and blue!
With the backside closed it peeps through
Because of the length the inside still looks very clean
Color coordination rocks
And last for now, a view of all the extra cable Seasonic have used (and I have removed)
Much much more to come soon, stay sharp