Overclock.net › Forums › Intel › Intel CPUs › Confused... 124 BSOD with 4770k
New Posts  All Forums:Forum Nav:

Confused... 124 BSOD with 4770k - Page 2

post #11 of 14
Quote:
Originally Posted by HaitusClock View Post

And yeah, I played Far Cry 3 for about 3 hours last night. No problem at all. I haven't ran Memtest with this motherboard, however I did about a week ago with no problems.

I clearly stated BF3 not Far Cry 3, those are two very different games. Far Cry 3 is not another name for BF3 neither is it its substitute.
Again 0124 error may also indicate a weak IMC
post #12 of 14
Thread Starter 
Quote:
Originally Posted by TLM-610 View Post

I clearly stated BF3 not Far Cry 3, those are two very different games. Far Cry 3 is not another name for BF3 neither is it its substitute.
Again 0124 error may also indicate a weak IMC
Don't worry bud, I know the difference.
Anyway, it was just an unstable OC. Weird that it took so long to become unstable, but upping the voltage a tiny bit did the trick. No instability while under load or while playing BF3, or streaming any game. Thanks for everyone who helped.
My Comp
(6 items)
 
  
CPUMotherboardGraphicsRAM
i7 4770k ASUS Z87-A LGA 1150 Intel Z87 HDMI SATA 6Gb/s U... EVGA GTX 980 TI SC ACX G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin ... 
Hard DriveCooling
OCZ Agility 120 gb SSD Corsair H80 
  hide details  
Reply
My Comp
(6 items)
 
  
CPUMotherboardGraphicsRAM
i7 4770k ASUS Z87-A LGA 1150 Intel Z87 HDMI SATA 6Gb/s U... EVGA GTX 980 TI SC ACX G.SKILL Ripjaws X Series 8GB (2 x 4GB) 240-Pin ... 
Hard DriveCooling
OCZ Agility 120 gb SSD Corsair H80 
  hide details  
Reply
post #13 of 14
Here are a few helping codes:

0x124 = add/remove vcore or QPI/VTT voltage (usually Vcore, once it was QPI/VTT)
0x101 = add more vcore
0x50 = RAM timings/Frequency add DDR3 voltage or add QPI/VTT
0x1E = add more vcore
0x3B = add more vcore
0xD1 = add QPI/VTT voltage
0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances
0X109 = add DDR3 voltage
0x0A = add QPI/VTT voltage
0x1A = Memory management error. It usually means a bad stick of Ram. Test with Memtest or whatever you prefer.
Try raising your Ram voltage. Can also mean more juice for the south bridge ICH volts
0x19: memory voltage
post #14 of 14
Keep the same 1.250v and turn up LLC.....That helped me get it stable at 4.5Ghz without having to turn up Vcore... As I was drooping just enough wile gaming to be unstable but in Prime and aida it was fine...
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Intel CPUs
Overclock.net › Forums › Intel › Intel CPUs › Confused... 124 BSOD with 4770k