Overclock.net › Forums › Graphics Cards › NVIDIA › Unlock Afterburner limits on lots of cards! some with LLC (One tool for all AB versions)
New Posts  All Forums:Forum Nav:

Unlock Afterburner limits on lots of cards! some with LLC (One tool for all AB versions) - Page 14

post #131 of 1278
Thread Starter 
Quote:
Originally Posted by Scorpion667 View Post

well stock voltage on LN2 BIOS is 1.25v ~ 1.26v (as far as I recall when I checked with DMM) on the 680L. + 200mv would mean 1.45v ~ 1.46v

At 27c ambient and +137mv I was hitting 84c in heaven 15 min run with side panel off (100% fan) so be careful that you have some godly cooling if you're benching at +200. I can do it easily if i start my AC and use a room fan (stays under 77c at +200mv) but just be cautious. If you break your card that's between you and MSI tongue.gif

770 lightning software says 1.2v is stock not had time to measure with a multi
I should game.
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 3820 rampage 4 extreme GTX 970 Gskill Ripjawz 2133mhz 
Hard DriveCoolingCoolingOS
Raid 0 4x120 840 evo  EK Supremacy CSQ EK FB Kit RE4 LE CSQ MB block windows 7 64bit 
MonitorPowerCaseOther
samsung D6530 40" Corsair RM Series 1000W corsair 750d 9 x 120mm rad 
Other
other loop parts 
  hide details  
Reply
I should game.
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 3820 rampage 4 extreme GTX 970 Gskill Ripjawz 2133mhz 
Hard DriveCoolingCoolingOS
Raid 0 4x120 840 evo  EK Supremacy CSQ EK FB Kit RE4 LE CSQ MB block windows 7 64bit 
MonitorPowerCaseOther
samsung D6530 40" Corsair RM Series 1000W corsair 750d 9 x 120mm rad 
Other
other loop parts 
  hide details  
Reply
post #132 of 1278
Anyone try this with an nVidia-based Asus DirectCU II (DC2) card using the 8138 controller, no hard mods, and see if it works? Nice tool, by the way OP! thumb.gif
The Sig Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600K @ 4.xghz MSI Z68A-GD65 (G3) MSI GTX 970 Gaming SLI @ 1504mhz core/8020mhz m... 16GB DDR3 2x 8gb @ 1866mhz C8 
Hard DriveHard DriveOptical DriveCooling
240GB Sandisk Extreme A few 2tb hdd's. DVDRW Corsair H75 CLC on the CPU 
OSMonitorKeyboardPower
Windows 8.1 Pro 64-bit ACER B326hk 4k 60hz 3840x2160 IPS sst display Coolermaster Cherry MX Brown switch mechanical ... Corsair TX 950w 
CaseMouseMouse PadAudio
Fractal Design Define R3 Black Pearl Logitech MX518 EverGlide Titan "Medium" Soundblaster Z PCIE 
  hide details  
Reply
The Sig Rig
(16 items)
 
  
CPUMotherboardGraphicsRAM
i7 2600K @ 4.xghz MSI Z68A-GD65 (G3) MSI GTX 970 Gaming SLI @ 1504mhz core/8020mhz m... 16GB DDR3 2x 8gb @ 1866mhz C8 
Hard DriveHard DriveOptical DriveCooling
240GB Sandisk Extreme A few 2tb hdd's. DVDRW Corsair H75 CLC on the CPU 
OSMonitorKeyboardPower
Windows 8.1 Pro 64-bit ACER B326hk 4k 60hz 3840x2160 IPS sst display Coolermaster Cherry MX Brown switch mechanical ... Corsair TX 950w 
CaseMouseMouse PadAudio
Fractal Design Define R3 Black Pearl Logitech MX518 EverGlide Titan "Medium" Soundblaster Z PCIE 
  hide details  
Reply
post #133 of 1278
now i ve tried RBBY258MOREVOLTZ application as you explained. but nothing is changed. what is my false? what a full-faulty-day for me smile.gif
post #134 of 1278
GPU: SLI Asus DC2 770gtx
Cooling: extreme water cooling
I cant get over 1300mhz with stock volt (ambient 21°, cores 34°)

I read the whole post, try ArtMoney & Rbby with MSI Afterburn, and ArtMoney with Asus Tweak program.


Asus Tweak + ArtMoney: ArtMoney get the location, set values in ArMoney, but AsusTweak put it back to 1212mv (its use the total amount). No happy ending, volt locked to 1212mv. Volt reading is also 1212mv all the time...

MSI Afterburn + Rbby: send the values.. but volt doesn't go over 12mv (it use the extra volt over the 1200mv standard). Volt reading is 1212mv all the time.

MSI Afterburn + ArtMoney: ArtMoney get the location, set values in ArtMoney, Afterburn detect the extra volt and even move the bar more than its allowed, getting out of the image. But after 2-3 seconds the volt value at ArtMoney come back to 12, and the bar at Afterburn come back at is original position. So even if u get Afterburn over 12mv, it goes back in few later. Also volt reading is 1212mv all the time, even in those few seconds.




Any idea? am i doing something wrong? Stupid Asus, i should buy Lighting frown.gif and 4gb version. Every game i run without any filter (AA, etc) use 1800-2020mb.
Edited by alegelos - 7/10/13 at 2:08pm
post #135 of 1278
Thread Starter 
Quote:
Originally Posted by drserk View Post

now i ve tried RBBY258MOREVOLTZ application as you explained. but nothing is changed. what is my false? what a full-faulty-day for me smile.gif

You got your rig working then, it 100% works on 770 lightning. Whats happening? Are your doing everything right? Are you using the LN2 bios (switch pc off first then change to it)?
I should game.
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 3820 rampage 4 extreme GTX 970 Gskill Ripjawz 2133mhz 
Hard DriveCoolingCoolingOS
Raid 0 4x120 840 evo  EK Supremacy CSQ EK FB Kit RE4 LE CSQ MB block windows 7 64bit 
MonitorPowerCaseOther
samsung D6530 40" Corsair RM Series 1000W corsair 750d 9 x 120mm rad 
Other
other loop parts 
  hide details  
Reply
I should game.
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 3820 rampage 4 extreme GTX 970 Gskill Ripjawz 2133mhz 
Hard DriveCoolingCoolingOS
Raid 0 4x120 840 evo  EK Supremacy CSQ EK FB Kit RE4 LE CSQ MB block windows 7 64bit 
MonitorPowerCaseOther
samsung D6530 40" Corsair RM Series 1000W corsair 750d 9 x 120mm rad 
Other
other loop parts 
  hide details  
Reply
post #136 of 1278
If it possible to flash Asus 770 with Lighting 770 Bios? Even if Asus use digital power phases? That is whats holding me back from Flashing to Lighting.
post #137 of 1278
Thread Starter 
Quote:
Originally Posted by alegelos View Post

GPU: SLI Asus DC2 770gtx
Cooling: extreme water cooling
I cant get over 1300mhz with stock volt (ambient 21°, cores 34°)

I read the whole post, try ArtMoney & Rbby with MSI Afterburn, and ArtMoney with Asus Tweak program.


Asus Tweak + ArtMoney: ArtMoney get the location, set values in ArMoney, but AsusTweak put it back to 1212mv (its use the total amount). No happy ending, volt locked to 1212mv. Volt reading is also 1212mv all the time...

MSI Afterburn + Rbby: send the values.. but volt doesn't go over 12mv (it use the extra volt over the 1200mv standard). Volt reading is 1212mv all the time.

MSI Afterburn + ArtMoney: ArtMoney get the location, set values in ArtMoney, Afterburn detect the extra volt and even move the bar more than its allowed, getting out of the image. But after 2-3 seconds the volt value at ArtMoney come back to 12, and the bar at Afterburn come back at is original position. So even if u get Afterburn over 12mv, it goes back in few later. Also volt reading is 1212mv all the time, even in those few seconds.




Any idea? am i doing something wrong? Stupid Asus, i should buy Lighting frown.gif and 4gb version. Every game i run without any filter (AA, etc) use 1800-2020mb.

Your card don't work with this method, sorry.
I should game.
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 3820 rampage 4 extreme GTX 970 Gskill Ripjawz 2133mhz 
Hard DriveCoolingCoolingOS
Raid 0 4x120 840 evo  EK Supremacy CSQ EK FB Kit RE4 LE CSQ MB block windows 7 64bit 
MonitorPowerCaseOther
samsung D6530 40" Corsair RM Series 1000W corsair 750d 9 x 120mm rad 
Other
other loop parts 
  hide details  
Reply
I should game.
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 3820 rampage 4 extreme GTX 970 Gskill Ripjawz 2133mhz 
Hard DriveCoolingCoolingOS
Raid 0 4x120 840 evo  EK Supremacy CSQ EK FB Kit RE4 LE CSQ MB block windows 7 64bit 
MonitorPowerCaseOther
samsung D6530 40" Corsair RM Series 1000W corsair 750d 9 x 120mm rad 
Other
other loop parts 
  hide details  
Reply
post #138 of 1278
Thread Starter 
Quote:
Originally Posted by alegelos View Post

If it possible to flash Asus 770 with Lighting 770 Bios? Even if Asus use digital power phases? That is whats holding me back from Flashing to Lighting.

possibly, someone back when the 770's came out flashed my 770 lightning bios to it and it worked. They flashed back after cant remember why.
I should game.
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 3820 rampage 4 extreme GTX 970 Gskill Ripjawz 2133mhz 
Hard DriveCoolingCoolingOS
Raid 0 4x120 840 evo  EK Supremacy CSQ EK FB Kit RE4 LE CSQ MB block windows 7 64bit 
MonitorPowerCaseOther
samsung D6530 40" Corsair RM Series 1000W corsair 750d 9 x 120mm rad 
Other
other loop parts 
  hide details  
Reply
I should game.
(13 items)
 
  
CPUMotherboardGraphicsRAM
i7 3820 rampage 4 extreme GTX 970 Gskill Ripjawz 2133mhz 
Hard DriveCoolingCoolingOS
Raid 0 4x120 840 evo  EK Supremacy CSQ EK FB Kit RE4 LE CSQ MB block windows 7 64bit 
MonitorPowerCaseOther
samsung D6530 40" Corsair RM Series 1000W corsair 750d 9 x 120mm rad 
Other
other loop parts 
  hide details  
Reply
post #139 of 1278
Hope any come with a solution, i really need more power. Using 3x VG248QE monitors, its hard to get over 120fps even in normal quality and high in other games.

If no unlock i guess its time to for a change...
post #140 of 1278
He said he lost the volt control.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: NVIDIA
Overclock.net › Forums › Graphics Cards › NVIDIA › Unlock Afterburner limits on lots of cards! some with LLC (One tool for all AB versions)