Overclock.net › Forums › Graphics Cards › NVIDIA › Unlock Afterburner limits on lots of cards! some with LLC (One tool for all AB versions)
New Posts  All Forums:Forum Nav:

Unlock Afterburner limits on lots of cards! some with LLC (One tool for all AB versions) - Page 78

post #771 of 1282
Quote:
Originally Posted by Rbby258 View Post

I would stick with beta 15, Does memory voltage work if you try less like +150

Will do then, thanks. I have tried +25mv to 200Mv and about everything in between. I guess 1.7v is going to be the max..
post #772 of 1282
Hi Rbby258, just wanna ask what max core voltage that this tool can handle?? So far so good I use it with GTX780 Lightning with +150mv which is 1.30volt max ^_^ for 1360mhz just for benchmark.
I wanna now is 1.45volt or +300mv can be done with this tool....but I think it's to hard for my card, perhaps +200mv is enough?? rolleyes.gif

Note : add +rep for your amazing tool thumb.gif
SkynetX
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeon E5-2623 V3 @3GHz running 3.3GHz MSI X99A SLI Krait Edition Inno3D GTX980Ti Ichill Black Hybrid  Gskill Ripjaws V 4x4G DDR4 2400MHz 
Hard DriveOptical DriveCoolingOS
Seagate Barracuda HDD 1TB SATA3 SAMSUNG Bluray Combo SH-B123L Cooler Master Hyper 212X Turbo Windows 10 Pro 64bit 
MonitorKeyboardPowerCase
DELL U2713HMT Thermaltake Poseidon Z CoolerMaster Silent Pro M2 1000W Silver Acrylic Benchtable 
MouseMouse PadAudio
Razer Death Adder Blue 3.5G Razer Goliathus Extended [Control] Creative Inspire T3030 
  hide details  
Reply
SkynetX
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeon E5-2623 V3 @3GHz running 3.3GHz MSI X99A SLI Krait Edition Inno3D GTX980Ti Ichill Black Hybrid  Gskill Ripjaws V 4x4G DDR4 2400MHz 
Hard DriveOptical DriveCoolingOS
Seagate Barracuda HDD 1TB SATA3 SAMSUNG Bluray Combo SH-B123L Cooler Master Hyper 212X Turbo Windows 10 Pro 64bit 
MonitorKeyboardPowerCase
DELL U2713HMT Thermaltake Poseidon Z CoolerMaster Silent Pro M2 1000W Silver Acrylic Benchtable 
MouseMouse PadAudio
Razer Death Adder Blue 3.5G Razer Goliathus Extended [Control] Creative Inspire T3030 
  hide details  
Reply
post #773 of 1282
Quote:
Originally Posted by neoroy View Post

Hi Rbby258, just wanna ask what max core voltage that this tool can handle?? So far so good I use it with GTX780 Lightning with +150mv which is 1.30volt max ^_^ for 1360mhz just for benchmark.
I wanna now is 1.45volt or +300mv can be done with this tool....but I think it's to hard for my card, perhaps +200mv is enough?? rolleyes.gif

Note : add +rep for your amazing tool thumb.gif

I tested Rbby's tool up to 1.45V & that works fine, running it just depends on temps & how comfortable you are with the voltage & temps. The higher the voltage goes the cooler I want the card to run.

The tool should be useable to 1.8V +, the voltage controller is capable of 2.3V max.
    
CPUMotherboardGraphicsRAM
i7 990x/3930k/3770k/4770k GB x58a-OC/Asus RIVE/x79 gd65/z77 mpower/z77 MV... gtx480s/gtx580s/7970s/680s/Titan Hyper/PSC/BBSE/Hynix/Samsung 
Hard DriveOptical DriveCoolingOS
HDDs/SSDs DVD Air/water/phase/copper pot Windowz 
MonitorKeyboardPowerCase
samsung 2320 Razer Lycosa ax1200 carboard box 
Mouse
Trackball 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 990x/3930k/3770k/4770k GB x58a-OC/Asus RIVE/x79 gd65/z77 mpower/z77 MV... gtx480s/gtx580s/7970s/680s/Titan Hyper/PSC/BBSE/Hynix/Samsung 
Hard DriveOptical DriveCoolingOS
HDDs/SSDs DVD Air/water/phase/copper pot Windowz 
MonitorKeyboardPowerCase
samsung 2320 Razer Lycosa ax1200 carboard box 
Mouse
Trackball 
  hide details  
Reply
post #774 of 1282
Quote:
Originally Posted by FtW 420 View Post

I tested Rbby's tool up to 1.45V & that works fine, running it just depends on temps & how comfortable you are with the voltage & temps. The higher the voltage goes the cooler I want the card to run.

The tool should be useable to 1.8V +, the voltage controller is capable of 2.3V max.

Do you have some sort of chart? I regularly game with 1372MHz on 1.35v @ 100% load and let it get to 94c. (770 LT) I always assumed that less heat would get me a higher overclock but I had no idea these chips could take THAT MUCH voltage!
post #775 of 1282
Quote:
Originally Posted by FtW 420 View Post

I tested Rbby's tool up to 1.45V & that works fine, running it just depends on temps & how comfortable you are with the voltage & temps. The higher the voltage goes the cooler I want the card to run.

The tool should be useable to 1.8V +, the voltage controller is capable of 2.3V max.

Oh my Lord biggrin.gif it can goes up to 1.8v?? Yup you have said 1.45v works fine with this tool via PM ^_^ thx Lorne thumb.gif
Btw last night I ran 1360mhz with +135volt and got temp up to 77c and VRM was 50-ish with stock cooling and all 80% fan. Still safe Lorne?? For benchmark ofcourse and not for daily biggrin.gif because it's beginning artifact while in benchmark.
SkynetX
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeon E5-2623 V3 @3GHz running 3.3GHz MSI X99A SLI Krait Edition Inno3D GTX980Ti Ichill Black Hybrid  Gskill Ripjaws V 4x4G DDR4 2400MHz 
Hard DriveOptical DriveCoolingOS
Seagate Barracuda HDD 1TB SATA3 SAMSUNG Bluray Combo SH-B123L Cooler Master Hyper 212X Turbo Windows 10 Pro 64bit 
MonitorKeyboardPowerCase
DELL U2713HMT Thermaltake Poseidon Z CoolerMaster Silent Pro M2 1000W Silver Acrylic Benchtable 
MouseMouse PadAudio
Razer Death Adder Blue 3.5G Razer Goliathus Extended [Control] Creative Inspire T3030 
  hide details  
Reply
SkynetX
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeon E5-2623 V3 @3GHz running 3.3GHz MSI X99A SLI Krait Edition Inno3D GTX980Ti Ichill Black Hybrid  Gskill Ripjaws V 4x4G DDR4 2400MHz 
Hard DriveOptical DriveCoolingOS
Seagate Barracuda HDD 1TB SATA3 SAMSUNG Bluray Combo SH-B123L Cooler Master Hyper 212X Turbo Windows 10 Pro 64bit 
MonitorKeyboardPowerCase
DELL U2713HMT Thermaltake Poseidon Z CoolerMaster Silent Pro M2 1000W Silver Acrylic Benchtable 
MouseMouse PadAudio
Razer Death Adder Blue 3.5G Razer Goliathus Extended [Control] Creative Inspire T3030 
  hide details  
Reply
post #776 of 1282
Quote:
Originally Posted by neoroy View Post

Oh my Lord biggrin.gif it can goes up to 1.8v?? Yup you have said 1.45v works fine with this tool via PM ^_^ thx Lorne thumb.gif
Btw last night I ran 1360mhz with +135volt and got temp up to 77c and VRM was 50-ish with stock cooling and all 80% fan. Still safe Lorne?? For benchmark ofcourse and not for daily biggrin.gif because it's beginning artifact while in benchmark.

Haha are you kidding me, you haven't reached your max until the fans are at 100% and you're hitting 90c. Add another 50mv!. biggrin.gif
post #777 of 1282
Quote:
Originally Posted by neoroy View Post

Oh my Lord biggrin.gif it can goes up to 1.8v?? Yup you have said 1.45v works fine with this tool via PM ^_^ thx Lorne thumb.gif
Btw last night I ran 1360mhz with +135volt and got temp up to 77c and VRM was 50-ish with stock cooling and all 80% fan. Still safe Lorne?? For benchmark ofcourse and not for daily biggrin.gif because it's beginning artifact while in benchmark.

Be wary. My 760 hawk just died at 1.325v and almost took my mobo with it. Temps were around yours at about 80c.
post #778 of 1282
Quote:
Originally Posted by cookieboyeli View Post

Haha are you kidding me, you haven't reached your max until the fans are at 100% and you're hitting 90c. Add another 50mv!. biggrin.gif
Hmm +380 for core and +150mv artifacting while benchmark (not like memory artifact but core artifact) so I add again to +200mv still artifact, I guess I've hit the wall rolleyes.gif
Hit +250mv with all fan 100%? I'm abit worry rolleyes.gif

Quote:
Originally Posted by TheBoom View Post

Be wary. My 760 hawk just died at 1.325v and almost took my mobo with it. Temps were around yours at about 80c.
Sorry for your lost TheBoom, I just hope it never happened to my card biggrin.gif I need to be really becareful.
Btw thx for the warning smile.gif
SkynetX
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeon E5-2623 V3 @3GHz running 3.3GHz MSI X99A SLI Krait Edition Inno3D GTX980Ti Ichill Black Hybrid  Gskill Ripjaws V 4x4G DDR4 2400MHz 
Hard DriveOptical DriveCoolingOS
Seagate Barracuda HDD 1TB SATA3 SAMSUNG Bluray Combo SH-B123L Cooler Master Hyper 212X Turbo Windows 10 Pro 64bit 
MonitorKeyboardPowerCase
DELL U2713HMT Thermaltake Poseidon Z CoolerMaster Silent Pro M2 1000W Silver Acrylic Benchtable 
MouseMouse PadAudio
Razer Death Adder Blue 3.5G Razer Goliathus Extended [Control] Creative Inspire T3030 
  hide details  
Reply
SkynetX
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeon E5-2623 V3 @3GHz running 3.3GHz MSI X99A SLI Krait Edition Inno3D GTX980Ti Ichill Black Hybrid  Gskill Ripjaws V 4x4G DDR4 2400MHz 
Hard DriveOptical DriveCoolingOS
Seagate Barracuda HDD 1TB SATA3 SAMSUNG Bluray Combo SH-B123L Cooler Master Hyper 212X Turbo Windows 10 Pro 64bit 
MonitorKeyboardPowerCase
DELL U2713HMT Thermaltake Poseidon Z CoolerMaster Silent Pro M2 1000W Silver Acrylic Benchtable 
MouseMouse PadAudio
Razer Death Adder Blue 3.5G Razer Goliathus Extended [Control] Creative Inspire T3030 
  hide details  
Reply
post #779 of 1282
Quote:
Originally Posted by neoroy View Post

Hmm +380 for core and +150mv artifacting while benchmark (not like memory artifact but core artifact) so I add again to +200mv still artifact, I guess I've hit the wall rolleyes.gif
Hit +250mv with all fan 100%? I'm abit worry rolleyes.gif
Sorry for your lost TheBoom, I just hope it never happened to my card biggrin.gif I need to be really becareful.
Btw thx for the warning smile.gif

No prob. Same thing happened with mine. Occasional core artifacting (mem at +0) and weird half fps bouts, then i decided i'd hit the wall so I backed it down. All was fine until one run of valley my system just went off like that. Couldn't boot back in. Realized that the card was dead. Happened before but instead my asus p8h67 mobo had died so I had thought it was a mobo problem. Then purchased an asrock oc formula. This time around the mobo probably had some sort of protection so the over current probably went to the card. Still took half the onboard audio jack with it (only left speaker working now) mad.giffrown.gif.
post #780 of 1282
Quote:
Originally Posted by TheBoom View Post

No prob. Same thing happened with mine. Occasional core artifacting (mem at +0) and weird half fps bouts, then i decided i'd hit the wall so I backed it down. All was fine until one run of valley my system just went off like that. Couldn't boot back in. Realized that the card was dead. Happened before but instead my asus p8h67 mobo had died so I had thought it was a mobo problem. Then purchased an asrock oc formula. This time around the mobo probably had some sort of protection so the over current probably went to the card. Still took half the onboard audio jack with it (only left speaker working now) mad.giffrown.gif.
Thx again mate smile.gif
Add +rep for your sharing, btw so did you RMA the card?

Btw I still confuse about how to disable LLC smile.gif if I check it says I2C 04 20 de : Invalid, I use VDDC of Chil 8318. Or is it only for NCP4206?
Edited by neoroy - 1/13/14 at 9:31am
SkynetX
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeon E5-2623 V3 @3GHz running 3.3GHz MSI X99A SLI Krait Edition Inno3D GTX980Ti Ichill Black Hybrid  Gskill Ripjaws V 4x4G DDR4 2400MHz 
Hard DriveOptical DriveCoolingOS
Seagate Barracuda HDD 1TB SATA3 SAMSUNG Bluray Combo SH-B123L Cooler Master Hyper 212X Turbo Windows 10 Pro 64bit 
MonitorKeyboardPowerCase
DELL U2713HMT Thermaltake Poseidon Z CoolerMaster Silent Pro M2 1000W Silver Acrylic Benchtable 
MouseMouse PadAudio
Razer Death Adder Blue 3.5G Razer Goliathus Extended [Control] Creative Inspire T3030 
  hide details  
Reply
SkynetX
(16 items)
 
  
CPUMotherboardGraphicsRAM
Intel Xeon E5-2623 V3 @3GHz running 3.3GHz MSI X99A SLI Krait Edition Inno3D GTX980Ti Ichill Black Hybrid  Gskill Ripjaws V 4x4G DDR4 2400MHz 
Hard DriveOptical DriveCoolingOS
Seagate Barracuda HDD 1TB SATA3 SAMSUNG Bluray Combo SH-B123L Cooler Master Hyper 212X Turbo Windows 10 Pro 64bit 
MonitorKeyboardPowerCase
DELL U2713HMT Thermaltake Poseidon Z CoolerMaster Silent Pro M2 1000W Silver Acrylic Benchtable 
MouseMouse PadAudio
Razer Death Adder Blue 3.5G Razer Goliathus Extended [Control] Creative Inspire T3030 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: NVIDIA
Overclock.net › Forums › Graphics Cards › NVIDIA › Unlock Afterburner limits on lots of cards! some with LLC (One tool for all AB versions)