Thanks for the info! in My case I will just be cooling a single cpu and gpu with two 120.4 rads with fans in push pull blowing air at each other in the bottom of the case like yours. Given that you can get 41C on yours although you have more rads over all in your case I feel that this setup should work just fine as even if I add more WC blocks for more cards ect in the future I can still hit my target temps of 45C with this configuration which is what I really care about. I plan to transition my current computer to this case and then upgrade the m/b cpu ram ect when cannonlake-e comes out. What I like about this case is that I can use QDs to make it to every section can be easily removed for repair and testing hell remove two QDs and some power connectors and I can take the entire motherboard with everything out of the case for upgrades/repair. The extra space in this case will easily fit my 20+ HDDs to hold me over until they get moved out and kept with the original motherboard/cpu/raid card to use as a file server once cannonlake-e hits.
Well it was looking good until I saw this: http://www.caselabs-store.com/hdd-side-mount-single-wide-magnum/
Not sure why it can not work up top but there goes my build Edited by zeroibis - 7/7/16 at 5:40am