Originally Posted by iamkraine
I am seriously at my wits end. I have dialed in a 44 overclock at 1.2 volts on manual but now I want to take advantage of adaptive mode on my Maximus VI Impact motherboard. Nothing seems to work the voltages do not change no matter what I do and I cannot find a concrete solution to implementing adaptive mode. What do I do? I am willing to try anything to get this to work.
Let me know if you need certain information.
The way to use adaptive is pretty simple however kinda weird also lol....what you do is select adaptive for boith vcore and uncore voltage and you put the specified vcore in the tubro voltage mode not the offset at all...
so you want 1.2vcorer you select adaptive mode and put 1.2v in the turbo field not the offset field....
you also need to select vdroop/llc of 100% or lvl 1-10
you also need to specify the input voltage vrin/vccin voltage....
so initial and eventual inout voltage example:
initial - 1.85v << slightly higher than eventual
eventual - 1.8v < go up as the vcore goes up etc keep within 0.55v of then vcore