Yeah well I figured it out... So After finding out that my fan on the radiator where facing each other and basically canceling the airflow thought the rad I've dropped temps by 15 C at same voltage. Currently on 1.310 Volts at 4.6 Ghz, prime small ftt has been running for 15 min as of right now. Temps are around 83-85 C. Seems hot but the chips handle it like a champ (was wondering if it's too high and I should go a bit easyer on the voltage here)
Basically one of the core is sitting 10c lower then the others again. It's either the TIM I applied or the ****ty one from intel (or spacing with the glue)... Any tips to get over 4.7-4.8ish Ghz or getting it more stable? I didn't mess around with the other voltage much, are those relevent and what kind of voltage should be safe with this chip? Not sure since sandy could take a lot and ivy less.