Originally Posted by DBEAU
You mentioned using a bay res so I'd like to add XSPC makes a real nice one with a D5 built in. And again, with a ray storm, GPU and 2 rads you can run this pump on the lowest setting without issue.
Someone else mentioned tube length being a factor but if you're building in a 350d and you seem conscience of minimizing tube length you'll be fine.
However, I can't speak for interference with the bays and the top rad.
Allready researched it, the bayres/d5 combo doesnt interfer with the rad in the top because of the reservoir not filling up the complet 5,25 bay but just like a third or so (pump sticks out more but is low enough to not touch a thinner rad). However i allready decided to go with the MCP35X.
Everything is picked, fittings, rads, pump, tubing, res, blocks and the only thing that is left are the fans.
Alot of people recommend the corsair sp quiet editions but my bro has them on his h100i and let me tell you, they are not nearly as quiet as i want my pc to be haha.
Anyone got experience with NB-BlackSilent Pro's (120mm)?
I would be looking at the PL-1 editions for ultimate silence, my motherboard only has 3 connectorls left after the pump is connected to the cpu pwm 4-pin.
So i would have to connect them via molex, not my question is weither they still run @ 900 RPM via 12V molex?
They describe that it starts @ 4,5V so increasing voltage would increase RPM or will it just have lower RPM @ 4,5V.
(Sorry if those questions seem retarded but im completely new to the whole concept and its my first time paying attention to stuff like that)Edited by maxtoned - 6/11/13 at 8:58am