Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Case Mod Work Logs › [Case/Build Log] Custom Solidworks Designed CNC Machined Acetal Case, GTX Titans, EK Watercooling...
New Posts  All Forums:Forum Nav:

[Case/Build Log] Custom Solidworks Designed CNC Machined Acetal Case, GTX Titans, EK Watercooling... - Page 10

post #91 of 120
Thread Starter 
Thanks for the suggestions.

Bends were just too tight. Honestly don't think angles would have helped but might explore them and even play with EKs ridgid fittings later. Ended up with this. Girlfriend. Helped me out, bored out of her mind for a few hours, poor thing but she did good.

Temps are up under load for the CPU so I'm thinking the added restriction is contributing or might need to re-do the CPU mount. Might explore a dual D5 pump setup if it's still a bit high when it's in the case and the pump doesn't run directly into both rads before the blocks while it's temporarily sitting on my desk in a mess.

    
CPUMotherboardGraphicsRAM
i7 4770k Gigabyte Z87X OC  Gigabyte GTX Titan Gskill Ripjaws 2400mhz 16GB 4x4GB  
Hard DriveHard DriveCoolingCooling
Corsair Force GS 240GB Western Digital Velociraptor 320GB EK GTX Titan Acetal Copper FC Block with Backplate EK Monarch DIMM Module heatspreaders 
CoolingCoolingCoolingOS
EK X3 Reservoir 150 EK Gigabyte Z87 X OC Acetal Copper Block EK Monarch X4 Copper Acetal Block with clean top Windows 8 64-Bit 
MonitorMonitorMonitorKeyboard
Dell U2412M Dell U2412M Dell U2412M Razer BlackWidow 
PowerCaseMouseMouse Pad
Corsair AX1200i Custome Acetal case CNC Machined from 8mm sheet  Razer Mamba Razer Ironclad 
OtherOtherOtherOther
Corsair Individually Sleeved Cables Koolance 90deg Elbows  Monsoon Compression Fittings Corsair SP120 Quiet Edition PWM Fans 
OtherOtherOtherOther
Koolance OD3 Quick Disconnect Male Compression Koolance OD3 Quick Disconnect Female G1/4 Threaded EK Acetal Clean Supremacy Block XSPC RX360 Radiator 
OtherOtherOther
XSPC Acrylic Tank Reservior/Pump Top XSPC RX360 Radiator  Koolance 450S D5 Pump 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 4770k Gigabyte Z87X OC  Gigabyte GTX Titan Gskill Ripjaws 2400mhz 16GB 4x4GB  
Hard DriveHard DriveCoolingCooling
Corsair Force GS 240GB Western Digital Velociraptor 320GB EK GTX Titan Acetal Copper FC Block with Backplate EK Monarch DIMM Module heatspreaders 
CoolingCoolingCoolingOS
EK X3 Reservoir 150 EK Gigabyte Z87 X OC Acetal Copper Block EK Monarch X4 Copper Acetal Block with clean top Windows 8 64-Bit 
MonitorMonitorMonitorKeyboard
Dell U2412M Dell U2412M Dell U2412M Razer BlackWidow 
PowerCaseMouseMouse Pad
Corsair AX1200i Custome Acetal case CNC Machined from 8mm sheet  Razer Mamba Razer Ironclad 
OtherOtherOtherOther
Corsair Individually Sleeved Cables Koolance 90deg Elbows  Monsoon Compression Fittings Corsair SP120 Quiet Edition PWM Fans 
OtherOtherOtherOther
Koolance OD3 Quick Disconnect Male Compression Koolance OD3 Quick Disconnect Female G1/4 Threaded EK Acetal Clean Supremacy Block XSPC RX360 Radiator 
OtherOtherOther
XSPC Acrylic Tank Reservior/Pump Top XSPC RX360 Radiator  Koolance 450S D5 Pump 
  hide details  
Reply
post #92 of 120
Thread Starter 




I don't know why I'm so proud of this giant mess but I find it hilarious. So one last picture of it before it throw it into the case and start building it now the loop for the blocks is done. Until I throw a second GTX Titan in. Chipset block will have to go when that happens. No way they can co-exist.

And the clear tubing is because I don't want to waste the new black roll I got for the actual build. Coolant will be clear also. Was too annoyed after it not working the first time to flush the blocks and loop.
    
CPUMotherboardGraphicsRAM
i7 4770k Gigabyte Z87X OC  Gigabyte GTX Titan Gskill Ripjaws 2400mhz 16GB 4x4GB  
Hard DriveHard DriveCoolingCooling
Corsair Force GS 240GB Western Digital Velociraptor 320GB EK GTX Titan Acetal Copper FC Block with Backplate EK Monarch DIMM Module heatspreaders 
CoolingCoolingCoolingOS
EK X3 Reservoir 150 EK Gigabyte Z87 X OC Acetal Copper Block EK Monarch X4 Copper Acetal Block with clean top Windows 8 64-Bit 
MonitorMonitorMonitorKeyboard
Dell U2412M Dell U2412M Dell U2412M Razer BlackWidow 
PowerCaseMouseMouse Pad
Corsair AX1200i Custome Acetal case CNC Machined from 8mm sheet  Razer Mamba Razer Ironclad 
OtherOtherOtherOther
Corsair Individually Sleeved Cables Koolance 90deg Elbows  Monsoon Compression Fittings Corsair SP120 Quiet Edition PWM Fans 
OtherOtherOtherOther
Koolance OD3 Quick Disconnect Male Compression Koolance OD3 Quick Disconnect Female G1/4 Threaded EK Acetal Clean Supremacy Block XSPC RX360 Radiator 
OtherOtherOther
XSPC Acrylic Tank Reservior/Pump Top XSPC RX360 Radiator  Koolance 450S D5 Pump 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 4770k Gigabyte Z87X OC  Gigabyte GTX Titan Gskill Ripjaws 2400mhz 16GB 4x4GB  
Hard DriveHard DriveCoolingCooling
Corsair Force GS 240GB Western Digital Velociraptor 320GB EK GTX Titan Acetal Copper FC Block with Backplate EK Monarch DIMM Module heatspreaders 
CoolingCoolingCoolingOS
EK X3 Reservoir 150 EK Gigabyte Z87 X OC Acetal Copper Block EK Monarch X4 Copper Acetal Block with clean top Windows 8 64-Bit 
MonitorMonitorMonitorKeyboard
Dell U2412M Dell U2412M Dell U2412M Razer BlackWidow 
PowerCaseMouseMouse Pad
Corsair AX1200i Custome Acetal case CNC Machined from 8mm sheet  Razer Mamba Razer Ironclad 
OtherOtherOtherOther
Corsair Individually Sleeved Cables Koolance 90deg Elbows  Monsoon Compression Fittings Corsair SP120 Quiet Edition PWM Fans 
OtherOtherOtherOther
Koolance OD3 Quick Disconnect Male Compression Koolance OD3 Quick Disconnect Female G1/4 Threaded EK Acetal Clean Supremacy Block XSPC RX360 Radiator 
OtherOtherOther
XSPC Acrylic Tank Reservior/Pump Top XSPC RX360 Radiator  Koolance 450S D5 Pump 
  hide details  
Reply
post #93 of 120
Tubing looks good to me now thumb.gif
Good stuff, waiting now for the final result smile.gif
   
My first LC build
(14 items)
 
CPUMotherboardGraphicsGraphics
Intel Core i7-5930K Gigabyte GA-X99-Gaming 7 WIFI Gigabyte GTX 970 (9GV-N970G1 GAMING-4GD) Gigabyte GTX 970 (9GV-N970G1 GAMING-4GD) 
RAMHard DriveHard DriveHard Drive
G.Skill Ripjaws 4 series 16GB (4 x 4GB) DDR4-28... Seagate Barracuda 3TB 7200 RPM SAMSUNG 830 Series 128GB x 2 RAID 0 Samsung SSD850 EVO 1TB 
CoolingOSMonitorMonitor
custom loop, 3x240 rads Windows 10 pro DELL P2715Q Benq xl2411z v2 
KeyboardPowerCaseMouse
SteelSeries 6Gv2 Seasonic Platinum 1200W (SS-1200XP3) Phanteks Enthoo Primo Sensei Raw 
CPUMotherboardGraphicsRAM
i5-750 ASUS - P7P55D-E Premium GTX 670 direct CU Kingston Genesis 
Hard DriveCoolingOSMonitor
Samsung 830 custom water loop windows 7 64 Ultimate Dell 2209WA 22 inch 1680x1050 
KeyboardPowerCaseMouse
steelseries corsair 760i Corsair 540 air steelseries xai 
Mouse PadAudio
steelseries asus 
CPUMotherboardGraphicsRAM
i5-750 ASUS - P7P55D-E Premium GTX 670 direct CU Kingston Genesis 
Hard DriveCoolingOSMonitor
Samsung 830 custom water loop windows 7 home premium Dell 2209WA 22 inch 1680x1050 
KeyboardPowerCaseMouse
steelseries corsair 760i CM 690 II adv steelseries xai 
Mouse PadAudio
steelseries asus 
  hide details  
Reply
   
My first LC build
(14 items)
 
CPUMotherboardGraphicsGraphics
Intel Core i7-5930K Gigabyte GA-X99-Gaming 7 WIFI Gigabyte GTX 970 (9GV-N970G1 GAMING-4GD) Gigabyte GTX 970 (9GV-N970G1 GAMING-4GD) 
RAMHard DriveHard DriveHard Drive
G.Skill Ripjaws 4 series 16GB (4 x 4GB) DDR4-28... Seagate Barracuda 3TB 7200 RPM SAMSUNG 830 Series 128GB x 2 RAID 0 Samsung SSD850 EVO 1TB 
CoolingOSMonitorMonitor
custom loop, 3x240 rads Windows 10 pro DELL P2715Q Benq xl2411z v2 
KeyboardPowerCaseMouse
SteelSeries 6Gv2 Seasonic Platinum 1200W (SS-1200XP3) Phanteks Enthoo Primo Sensei Raw 
CPUMotherboardGraphicsRAM
i5-750 ASUS - P7P55D-E Premium GTX 670 direct CU Kingston Genesis 
Hard DriveCoolingOSMonitor
Samsung 830 custom water loop windows 7 64 Ultimate Dell 2209WA 22 inch 1680x1050 
KeyboardPowerCaseMouse
steelseries corsair 760i Corsair 540 air steelseries xai 
Mouse PadAudio
steelseries asus 
CPUMotherboardGraphicsRAM
i5-750 ASUS - P7P55D-E Premium GTX 670 direct CU Kingston Genesis 
Hard DriveCoolingOSMonitor
Samsung 830 custom water loop windows 7 home premium Dell 2209WA 22 inch 1680x1050 
KeyboardPowerCaseMouse
steelseries corsair 760i CM 690 II adv steelseries xai 
Mouse PadAudio
steelseries asus 
  hide details  
Reply
post #94 of 120
Thread Starter 
Quote:
Originally Posted by Gleniu View Post

Tubing looks good to me now thumb.gif
Good stuff, waiting now for the final result smile.gif

Thanks.

Slowly getting started on the case now but still haven't got all my screws for final assembly yet. I've got the feet on, a few panels polished. Did the right thing and sanded it with 600grit, then 1200grit and then polished it but didn't really come out that different to straight up polishing over the freshly machined surface. So I'm going to leave the sides and just polish them with no sanding, see how they look compared to the front and back which I did properly and then decide if they need to be redone.

Doing the top now. Just using the polishing wheel on my dremel.




    
CPUMotherboardGraphicsRAM
i7 4770k Gigabyte Z87X OC  Gigabyte GTX Titan Gskill Ripjaws 2400mhz 16GB 4x4GB  
Hard DriveHard DriveCoolingCooling
Corsair Force GS 240GB Western Digital Velociraptor 320GB EK GTX Titan Acetal Copper FC Block with Backplate EK Monarch DIMM Module heatspreaders 
CoolingCoolingCoolingOS
EK X3 Reservoir 150 EK Gigabyte Z87 X OC Acetal Copper Block EK Monarch X4 Copper Acetal Block with clean top Windows 8 64-Bit 
MonitorMonitorMonitorKeyboard
Dell U2412M Dell U2412M Dell U2412M Razer BlackWidow 
PowerCaseMouseMouse Pad
Corsair AX1200i Custome Acetal case CNC Machined from 8mm sheet  Razer Mamba Razer Ironclad 
OtherOtherOtherOther
Corsair Individually Sleeved Cables Koolance 90deg Elbows  Monsoon Compression Fittings Corsair SP120 Quiet Edition PWM Fans 
OtherOtherOtherOther
Koolance OD3 Quick Disconnect Male Compression Koolance OD3 Quick Disconnect Female G1/4 Threaded EK Acetal Clean Supremacy Block XSPC RX360 Radiator 
OtherOtherOther
XSPC Acrylic Tank Reservior/Pump Top XSPC RX360 Radiator  Koolance 450S D5 Pump 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 4770k Gigabyte Z87X OC  Gigabyte GTX Titan Gskill Ripjaws 2400mhz 16GB 4x4GB  
Hard DriveHard DriveCoolingCooling
Corsair Force GS 240GB Western Digital Velociraptor 320GB EK GTX Titan Acetal Copper FC Block with Backplate EK Monarch DIMM Module heatspreaders 
CoolingCoolingCoolingOS
EK X3 Reservoir 150 EK Gigabyte Z87 X OC Acetal Copper Block EK Monarch X4 Copper Acetal Block with clean top Windows 8 64-Bit 
MonitorMonitorMonitorKeyboard
Dell U2412M Dell U2412M Dell U2412M Razer BlackWidow 
PowerCaseMouseMouse Pad
Corsair AX1200i Custome Acetal case CNC Machined from 8mm sheet  Razer Mamba Razer Ironclad 
OtherOtherOtherOther
Corsair Individually Sleeved Cables Koolance 90deg Elbows  Monsoon Compression Fittings Corsair SP120 Quiet Edition PWM Fans 
OtherOtherOtherOther
Koolance OD3 Quick Disconnect Male Compression Koolance OD3 Quick Disconnect Female G1/4 Threaded EK Acetal Clean Supremacy Block XSPC RX360 Radiator 
OtherOtherOther
XSPC Acrylic Tank Reservior/Pump Top XSPC RX360 Radiator  Koolance 450S D5 Pump 
  hide details  
Reply
post #95 of 120
it is coming along nicely. I really like what you have done. going to smaller tubing might make it look a little less "busy" and might be able to get the bend you want. I can't wait for the finish product as it looks kick ass right now.
post #96 of 120
Thread Starter 
Quote:
Originally Posted by vaporizer View Post

it is coming along nicely. I really like what you have done. going to smaller tubing might make it look a little less "busy" and might be able to get the bend you want. I can't wait for the finish product as it looks kick ass right now.

Thanks mate.

I agree, it does look busy at the moment. But I might be going back to X79 soon so not sure if I should spend anymore time on it if it'll all be changing... I'll see how BF4 handles my resolution and two GPUs first.

Accidentally scratched the hell out of the case doing something stupid, so I've been sanding that down and re-polishing it again because of course it didn't take enough time to polish it the first time. Lol.
    
CPUMotherboardGraphicsRAM
i7 4770k Gigabyte Z87X OC  Gigabyte GTX Titan Gskill Ripjaws 2400mhz 16GB 4x4GB  
Hard DriveHard DriveCoolingCooling
Corsair Force GS 240GB Western Digital Velociraptor 320GB EK GTX Titan Acetal Copper FC Block with Backplate EK Monarch DIMM Module heatspreaders 
CoolingCoolingCoolingOS
EK X3 Reservoir 150 EK Gigabyte Z87 X OC Acetal Copper Block EK Monarch X4 Copper Acetal Block with clean top Windows 8 64-Bit 
MonitorMonitorMonitorKeyboard
Dell U2412M Dell U2412M Dell U2412M Razer BlackWidow 
PowerCaseMouseMouse Pad
Corsair AX1200i Custome Acetal case CNC Machined from 8mm sheet  Razer Mamba Razer Ironclad 
OtherOtherOtherOther
Corsair Individually Sleeved Cables Koolance 90deg Elbows  Monsoon Compression Fittings Corsair SP120 Quiet Edition PWM Fans 
OtherOtherOtherOther
Koolance OD3 Quick Disconnect Male Compression Koolance OD3 Quick Disconnect Female G1/4 Threaded EK Acetal Clean Supremacy Block XSPC RX360 Radiator 
OtherOtherOther
XSPC Acrylic Tank Reservior/Pump Top XSPC RX360 Radiator  Koolance 450S D5 Pump 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 4770k Gigabyte Z87X OC  Gigabyte GTX Titan Gskill Ripjaws 2400mhz 16GB 4x4GB  
Hard DriveHard DriveCoolingCooling
Corsair Force GS 240GB Western Digital Velociraptor 320GB EK GTX Titan Acetal Copper FC Block with Backplate EK Monarch DIMM Module heatspreaders 
CoolingCoolingCoolingOS
EK X3 Reservoir 150 EK Gigabyte Z87 X OC Acetal Copper Block EK Monarch X4 Copper Acetal Block with clean top Windows 8 64-Bit 
MonitorMonitorMonitorKeyboard
Dell U2412M Dell U2412M Dell U2412M Razer BlackWidow 
PowerCaseMouseMouse Pad
Corsair AX1200i Custome Acetal case CNC Machined from 8mm sheet  Razer Mamba Razer Ironclad 
OtherOtherOtherOther
Corsair Individually Sleeved Cables Koolance 90deg Elbows  Monsoon Compression Fittings Corsair SP120 Quiet Edition PWM Fans 
OtherOtherOtherOther
Koolance OD3 Quick Disconnect Male Compression Koolance OD3 Quick Disconnect Female G1/4 Threaded EK Acetal Clean Supremacy Block XSPC RX360 Radiator 
OtherOtherOther
XSPC Acrylic Tank Reservior/Pump Top XSPC RX360 Radiator  Koolance 450S D5 Pump 
  hide details  
Reply
post #97 of 120
Thread Starter 
Case is done and turned out alright.

Sanded some scratched areas with 1200grit and polished it with the Dremel but mostly just left the machining lines and polished over the too with the Dremel. And yeah I need to tap the top right corner together a bit more. In the picture there is a small gap.

Just need the rad screws and then I can throw the build into the case.



    
CPUMotherboardGraphicsRAM
i7 4770k Gigabyte Z87X OC  Gigabyte GTX Titan Gskill Ripjaws 2400mhz 16GB 4x4GB  
Hard DriveHard DriveCoolingCooling
Corsair Force GS 240GB Western Digital Velociraptor 320GB EK GTX Titan Acetal Copper FC Block with Backplate EK Monarch DIMM Module heatspreaders 
CoolingCoolingCoolingOS
EK X3 Reservoir 150 EK Gigabyte Z87 X OC Acetal Copper Block EK Monarch X4 Copper Acetal Block with clean top Windows 8 64-Bit 
MonitorMonitorMonitorKeyboard
Dell U2412M Dell U2412M Dell U2412M Razer BlackWidow 
PowerCaseMouseMouse Pad
Corsair AX1200i Custome Acetal case CNC Machined from 8mm sheet  Razer Mamba Razer Ironclad 
OtherOtherOtherOther
Corsair Individually Sleeved Cables Koolance 90deg Elbows  Monsoon Compression Fittings Corsair SP120 Quiet Edition PWM Fans 
OtherOtherOtherOther
Koolance OD3 Quick Disconnect Male Compression Koolance OD3 Quick Disconnect Female G1/4 Threaded EK Acetal Clean Supremacy Block XSPC RX360 Radiator 
OtherOtherOther
XSPC Acrylic Tank Reservior/Pump Top XSPC RX360 Radiator  Koolance 450S D5 Pump 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 4770k Gigabyte Z87X OC  Gigabyte GTX Titan Gskill Ripjaws 2400mhz 16GB 4x4GB  
Hard DriveHard DriveCoolingCooling
Corsair Force GS 240GB Western Digital Velociraptor 320GB EK GTX Titan Acetal Copper FC Block with Backplate EK Monarch DIMM Module heatspreaders 
CoolingCoolingCoolingOS
EK X3 Reservoir 150 EK Gigabyte Z87 X OC Acetal Copper Block EK Monarch X4 Copper Acetal Block with clean top Windows 8 64-Bit 
MonitorMonitorMonitorKeyboard
Dell U2412M Dell U2412M Dell U2412M Razer BlackWidow 
PowerCaseMouseMouse Pad
Corsair AX1200i Custome Acetal case CNC Machined from 8mm sheet  Razer Mamba Razer Ironclad 
OtherOtherOtherOther
Corsair Individually Sleeved Cables Koolance 90deg Elbows  Monsoon Compression Fittings Corsair SP120 Quiet Edition PWM Fans 
OtherOtherOtherOther
Koolance OD3 Quick Disconnect Male Compression Koolance OD3 Quick Disconnect Female G1/4 Threaded EK Acetal Clean Supremacy Block XSPC RX360 Radiator 
OtherOtherOther
XSPC Acrylic Tank Reservior/Pump Top XSPC RX360 Radiator  Koolance 450S D5 Pump 
  hide details  
Reply
post #98 of 120
Thread Starter 
PSU and reservoir placement done, drilled, tapped and screwed in. Just have to do the same for the pump, then I can put the cable tie mounts in for the cable routing and then just need to assemble the build in the case. Is coming along pretty quick.



    
CPUMotherboardGraphicsRAM
i7 4770k Gigabyte Z87X OC  Gigabyte GTX Titan Gskill Ripjaws 2400mhz 16GB 4x4GB  
Hard DriveHard DriveCoolingCooling
Corsair Force GS 240GB Western Digital Velociraptor 320GB EK GTX Titan Acetal Copper FC Block with Backplate EK Monarch DIMM Module heatspreaders 
CoolingCoolingCoolingOS
EK X3 Reservoir 150 EK Gigabyte Z87 X OC Acetal Copper Block EK Monarch X4 Copper Acetal Block with clean top Windows 8 64-Bit 
MonitorMonitorMonitorKeyboard
Dell U2412M Dell U2412M Dell U2412M Razer BlackWidow 
PowerCaseMouseMouse Pad
Corsair AX1200i Custome Acetal case CNC Machined from 8mm sheet  Razer Mamba Razer Ironclad 
OtherOtherOtherOther
Corsair Individually Sleeved Cables Koolance 90deg Elbows  Monsoon Compression Fittings Corsair SP120 Quiet Edition PWM Fans 
OtherOtherOtherOther
Koolance OD3 Quick Disconnect Male Compression Koolance OD3 Quick Disconnect Female G1/4 Threaded EK Acetal Clean Supremacy Block XSPC RX360 Radiator 
OtherOtherOther
XSPC Acrylic Tank Reservior/Pump Top XSPC RX360 Radiator  Koolance 450S D5 Pump 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 4770k Gigabyte Z87X OC  Gigabyte GTX Titan Gskill Ripjaws 2400mhz 16GB 4x4GB  
Hard DriveHard DriveCoolingCooling
Corsair Force GS 240GB Western Digital Velociraptor 320GB EK GTX Titan Acetal Copper FC Block with Backplate EK Monarch DIMM Module heatspreaders 
CoolingCoolingCoolingOS
EK X3 Reservoir 150 EK Gigabyte Z87 X OC Acetal Copper Block EK Monarch X4 Copper Acetal Block with clean top Windows 8 64-Bit 
MonitorMonitorMonitorKeyboard
Dell U2412M Dell U2412M Dell U2412M Razer BlackWidow 
PowerCaseMouseMouse Pad
Corsair AX1200i Custome Acetal case CNC Machined from 8mm sheet  Razer Mamba Razer Ironclad 
OtherOtherOtherOther
Corsair Individually Sleeved Cables Koolance 90deg Elbows  Monsoon Compression Fittings Corsair SP120 Quiet Edition PWM Fans 
OtherOtherOtherOther
Koolance OD3 Quick Disconnect Male Compression Koolance OD3 Quick Disconnect Female G1/4 Threaded EK Acetal Clean Supremacy Block XSPC RX360 Radiator 
OtherOtherOther
XSPC Acrylic Tank Reservior/Pump Top XSPC RX360 Radiator  Koolance 450S D5 Pump 
  hide details  
Reply
post #99 of 120
Looking good!!!! drool.gif
post #100 of 120
Thread Starter 
Quote:
Originally Posted by seross69 View Post

Looking good!!!! drool.gif

Thanks mate.
    
CPUMotherboardGraphicsRAM
i7 4770k Gigabyte Z87X OC  Gigabyte GTX Titan Gskill Ripjaws 2400mhz 16GB 4x4GB  
Hard DriveHard DriveCoolingCooling
Corsair Force GS 240GB Western Digital Velociraptor 320GB EK GTX Titan Acetal Copper FC Block with Backplate EK Monarch DIMM Module heatspreaders 
CoolingCoolingCoolingOS
EK X3 Reservoir 150 EK Gigabyte Z87 X OC Acetal Copper Block EK Monarch X4 Copper Acetal Block with clean top Windows 8 64-Bit 
MonitorMonitorMonitorKeyboard
Dell U2412M Dell U2412M Dell U2412M Razer BlackWidow 
PowerCaseMouseMouse Pad
Corsair AX1200i Custome Acetal case CNC Machined from 8mm sheet  Razer Mamba Razer Ironclad 
OtherOtherOtherOther
Corsair Individually Sleeved Cables Koolance 90deg Elbows  Monsoon Compression Fittings Corsair SP120 Quiet Edition PWM Fans 
OtherOtherOtherOther
Koolance OD3 Quick Disconnect Male Compression Koolance OD3 Quick Disconnect Female G1/4 Threaded EK Acetal Clean Supremacy Block XSPC RX360 Radiator 
OtherOtherOther
XSPC Acrylic Tank Reservior/Pump Top XSPC RX360 Radiator  Koolance 450S D5 Pump 
  hide details  
Reply
    
CPUMotherboardGraphicsRAM
i7 4770k Gigabyte Z87X OC  Gigabyte GTX Titan Gskill Ripjaws 2400mhz 16GB 4x4GB  
Hard DriveHard DriveCoolingCooling
Corsair Force GS 240GB Western Digital Velociraptor 320GB EK GTX Titan Acetal Copper FC Block with Backplate EK Monarch DIMM Module heatspreaders 
CoolingCoolingCoolingOS
EK X3 Reservoir 150 EK Gigabyte Z87 X OC Acetal Copper Block EK Monarch X4 Copper Acetal Block with clean top Windows 8 64-Bit 
MonitorMonitorMonitorKeyboard
Dell U2412M Dell U2412M Dell U2412M Razer BlackWidow 
PowerCaseMouseMouse Pad
Corsair AX1200i Custome Acetal case CNC Machined from 8mm sheet  Razer Mamba Razer Ironclad 
OtherOtherOtherOther
Corsair Individually Sleeved Cables Koolance 90deg Elbows  Monsoon Compression Fittings Corsair SP120 Quiet Edition PWM Fans 
OtherOtherOtherOther
Koolance OD3 Quick Disconnect Male Compression Koolance OD3 Quick Disconnect Female G1/4 Threaded EK Acetal Clean Supremacy Block XSPC RX360 Radiator 
OtherOtherOther
XSPC Acrylic Tank Reservior/Pump Top XSPC RX360 Radiator  Koolance 450S D5 Pump 
  hide details  
Reply
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Case Mod Work Logs
Overclock.net › Forums › Case Mods & Cases › Builds & Case Mods › Case Mods › Case Mod Work Logs › [Case/Build Log] Custom Solidworks Designed CNC Machined Acetal Case, GTX Titans, EK Watercooling...