Originally Posted by jak3z
When unstable more voltage. I can't be here every second telling you what to do.
Then think two steps ahead and tell me what to do in case certain option fail.
More voltage? Which voltage?
Vcore or IMC ?
Ackording to this:
Common BSOD Error Codes for Overclocking
0x101 = increase vcore
0x124 = increase/decrease QPI/VTT first, if not increase/decrease vcore...have to test to see which one it is
on i7 45nm, usually means too little VVT/QPI for the speed of Uncore
on i7 32nm SB, usually means too little vCore
0x0A = unstable RAM/IMC, increase QPI first, if that doesn't work increase vcore
0x1A = Memory management error. It usually means a bad stick of Ram. Test with Memtest or whatever you prefer. Try raising your Ram voltage
0x1E = increase vcore
0x3B = increase vcore
0x3D = increase vcore
0xD1 = QPI/VTT, increase/decrease as necessary, can also be unstable Ram, raise Ram voltage
0x9C = QPI/VTT most likely, but increasing vcore has helped in some instances
0x50 = RAM timings/Frequency or uncore multi unstable, increase RAM voltage or adjust QPI/VTT, or lower uncore if you're higher than 2x
0x109 = Not enough or too Much memory voltage
0x116 = Low IOH (NB) voltage, GPU issue (most common when running multi-GPU/overclocking GPU)
0x7E = Corrupted OS file, possibly from overclocking. Run sfc /scannow and chkdsk /r
124 means I should increase QPI/VTT and that QPI/VTT thing is called IMC in my... OUR case since you have the same mobo.
Some people told me to go directly to 1.35 Vcore/ 1.35 IMC.
So what to do next?
Mate I dont expect you to be here all the time. I post what I did and I RESPECT you and your time so Im checking for your replies whenever you write them. I waited whole day yesterday - you told me you be off for a day, thats fine. I really respect you as much as I need your help. So whenever you have time and willing to give me a helpfull hand please let me know.