Overclock.net › Forums › Cooling › Water Cooling › Current airflow setup with rads in case
New Posts  All Forums:Forum Nav:

Current airflow setup with rads in case

post #1 of 3
Thread Starter 
Hi, my current setup is with the 800 D. One fan is intaking cool air at the bottom and a top 360mm rad is exasting hot air into the room. Another 140mm single rad is exasting hot air out the side into the room. Any problems with that? If so give me some suggestions!
post #2 of 3
You want slightly positive air flow (more air coming in), that way air is trying to escape from you case through the cracks. Negative would cause dust to bypass any filters you have on the intakes. So you want slightly positive or neutral. Sounds like you have negative air flow, you have much dust in you case? Or hight temps? I would probably only use your rad as an exhaust and switch the 140 too intake.
RedCraze
(23 items)
 
  
CPUMotherboardGraphicsGraphics
Intel core i5 4690k Asus maximus VII Hero MSI 7970 OC TF3 MSI 7970 OC TF3 
RAMHard DriveHard DriveHard Drive
G.Skill Ripjaw X 2166mhz 2x8GB Samsung 840 120gb 3tb toshiba Samsung 850 evo 250gb 
Optical DriveCoolingCoolingCooling
LG BH12LS35 Blu-Ray USB 3.0 EK-D5 X-RES 250 CSQ  MCP655 EK Supremacy Evo 
CoolingCoolingCoolingCooling
Bitspower Petg Tubing & Darkside Fittings EK Coolstream XE360 w/ AP-15 Push/Pull Ek Coolstream PE360 /AP-15 Push EK-FC7970-CSQ x 2 w/Backplate 
OSMonitorKeyboardPower
Windows 7 / Windows 10 Viewsonic vx2703mh  Logitech G15 XFX PRO1050W Black Edition  
CaseMouseMouse Pad
Corsair 900d  Logitech G502 SteelSeries QcK Gaming Mouse Pad 
  hide details  
Reply
RedCraze
(23 items)
 
  
CPUMotherboardGraphicsGraphics
Intel core i5 4690k Asus maximus VII Hero MSI 7970 OC TF3 MSI 7970 OC TF3 
RAMHard DriveHard DriveHard Drive
G.Skill Ripjaw X 2166mhz 2x8GB Samsung 840 120gb 3tb toshiba Samsung 850 evo 250gb 
Optical DriveCoolingCoolingCooling
LG BH12LS35 Blu-Ray USB 3.0 EK-D5 X-RES 250 CSQ  MCP655 EK Supremacy Evo 
CoolingCoolingCoolingCooling
Bitspower Petg Tubing & Darkside Fittings EK Coolstream XE360 w/ AP-15 Push/Pull Ek Coolstream PE360 /AP-15 Push EK-FC7970-CSQ x 2 w/Backplate 
OSMonitorKeyboardPower
Windows 7 / Windows 10 Viewsonic vx2703mh  Logitech G15 XFX PRO1050W Black Edition  
CaseMouseMouse Pad
Corsair 900d  Logitech G502 SteelSeries QcK Gaming Mouse Pad 
  hide details  
Reply
post #3 of 3
On my c70 vengeance case I have 9 fans 6 intake and 3 outtake. I figured a 3 to 1 ratio was a good way of doing it. But its only been a week since and I'm seeing improvements
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Water Cooling
Overclock.net › Forums › Cooling › Water Cooling › Current airflow setup with rads in case