Originally Posted by v1ral
How about a 360 radiator graphic as well, I have a spare MCR320 radiator here and I would like to put it it, but I think with either barbs top or bottom will have issues with clearance.
Thanks in advance..
nice looking rig!
I included the measurements on top exactly for 360. For 360 the mounting (fan or rad) on top would be aligned with the black stuff on the right side in the picture - case is slightly convex in the area facing fans/rad.
You can see it in this picture well:
So with 30mm rad and one layer of fans barbs on top may be ok - but it will be very tight, probably some fancy fittings required.
With barbs on the bottom if it's 30mm rad with fans in pull there should be no problem.
With push pull (my build) it looks like this (16mm tubing):
MCR320 is 34 mm thick, so it looks to me it would just fit - but don't take it for granted.
I hope it helps.