Should be getting 40+FPS on CATIA with current Firepro beta drivers.
Specviewperf 11 is also dependent on memory and CPU (clockspeed and IPC matter).
Firepro W8000 Intel Core i7 4770K , DDR3 1600 4GB x2 , Catalyst Pro 12.104.2
CATIA is 56+ FPS , but it's a 4GB ECC VRAM , 256-bit memory bus W8000 (HD7950 downclocked)
Firepro W7000, i7-4770k, DDR3-1600 4GB x2 , Catalyst 13.11 beta
CATIA is 50+FPS for Firepro W7000 (HD7870GE downclocked to 950MHz), 256-bit memory bus , 4GB ECC VRAM
CATIA is at least 40+FPS even with newer drivers...
Dual Xeon E5-2643 , 32GB DDR3 1333MHz ECC
Around August CATIA was a bit worse...
Even before that:
April 2013 (Catalyst Pro 9.003.3.3 , Catalyst 13.3 Beta 3)
Intel Core i7 3770K @ 4,5 GHz (water cooled)
32 GB Corsair Dominator Platinum @2133 MHz
CPU: Intel Core i5-3570K @ 4800MHz 1.35v , ASUS Maximus V Formula ,Samsung DDR-1600 4GB x 2@ 2133MHz ,THORTECH Thunderbolt 1200W , ADATA S511 120GB SSD
FirePro W9000 ／ 8.982.8.1
TL;DR , it doesn't look like you're getting Firepro performance and we need to know your CPU specs + memory speed and setup (SSD / HDD counts not as much).Edited by AlphaC - 10/20/13 at 6:42pm