Overclock.net banner

Haswell Refresh

588 views 1 reply 2 participants last post by  LanCam 
#1 ·
Updated my rig with some new goodies, specs:
Hardware:
-4770k
-Corsair Platinum 2800
-680 SLI
-Corsair 860i PSU
-MSI MPower MAX
-Samsung 256GB 830 SSD
-Crucial M4 128GB SSD
-Crucial C300 SSD
-WD VelociRaptor 1TB HDD

Case/Cooling:
-EK-Supremacy - Full Nickel CPU
-EK-Nickel Acetal GPU
-Laing D5 Pump
-XSPC RX360 Radiator
-XSPC EX240 Radiator
-Mayhems Aurora - Supernova Clear Coolant
-x6 Scythe Gentle Typhoon 120mm 1450 RPM Fan
-x1 Corsair AF140 Fan
-NZXT Mesh Fan Controller

For delidding I used the hammer/vice method and also lapped the IHS (took a long time...) as you can see from the pics there was an extreme dip in the middle, I don't know if this was caused by the clamping pressure of the vice?
Haven't done much overclocking yet, but I can say at 4.5Ghz 1.29v bios (1.36v under prime95 load) temps never exceeded 55c after 15mins.
I have also managed to run the RAM at XMP 2800 no problems!
I will update with my overclocking results and screenshots later.









 
See less See more
10
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top