Overclock.net › Forums › AMD › AMD Motherboards › BSOD Issues on 990FX Sabertooth with 1055T proccessor.
New Posts  All Forums:Forum Nav:

BSOD Issues on 990FX Sabertooth with 1055T proccessor.

post #1 of 2
Thread Starter 
So I recently upgraded to a new mobo the 990FX Sabertooth R2.0 and put my old AMD 1055T in it. I tried over clocking it to 4.0GHz in UEFI BIOS, and it seems that everyone is getting a stable PC after doing it! Mine BSODs ONLY when I'm playing ARMA2/3 BF3 or even using a highly threaded application like Autodesk, Sony Vegas, and Cinema 4D. I get different errors every time. I tried updating every single driver I have on my PC even my BIOS, and it still wouldn't budge.

I have no idea what the hell is going on inside my PC and why this is happening. So I had to go back to the stock speed (2.8GHz) and just run like that. I did ALOT of research and found out what the BSOD codes are telling me, but couldn't find a solution. So im turning to you guys. HELP ME!!!!!!!!!!!!!!!!!

TL-DR Version: My PC is BSODing when running at 4.0GHz while using highly threaded applications like games and rendering software and I don't know why.

Things me and you should know:
1- My CPU is water-cooled.
2- Room temp is always COOL.
3- My case (HAF 932) circulates air like a vacuum machine.
4- I have the BSOD codes for you.
5- Running 16GB HyperX Beasts @ 1600MHz
6- I adjusted the RAM speeds and kept at stock for OC.
7- Temps are BELOW 50c right at BSOD.
8- I ran MEM TEST and I got 2 successes and 0 errors after 4hrs.
9- I formatted my Drives with a fresh Win7 after installing my new mobo.

Look at the pictures below please.






Edited by Khalil_y - 6/24/13 at 11:37am
Project Venom
(15 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X6 1055T @ 4.0GHz ASUS SABERTOOTH 990FX R2.0 XFX ATi Radeon HD 5770 xXx Edition Kingston HyperX BEAST DDR3 16GB 
Hard DriveOptical DriveCoolingOS
WD Black Caviar 1TB x4 LG Modisk Antec H20 620 Windows 7 Ultimate x64 
MonitorKeyboardPowerCase
Acer 19 Inch 1440x900 Microsoft Sidewinder X4 Crosair TX 750W PSU CM HAF 932 w/ 2 Red Neons 
MouseAudio
Logitech MX Revolution Creative Tactic 3D Rage 
  hide details  
Reply
Project Venom
(15 items)
 
  
CPUMotherboardGraphicsRAM
AMD Phenom II X6 1055T @ 4.0GHz ASUS SABERTOOTH 990FX R2.0 XFX ATi Radeon HD 5770 xXx Edition Kingston HyperX BEAST DDR3 16GB 
Hard DriveOptical DriveCoolingOS
WD Black Caviar 1TB x4 LG Modisk Antec H20 620 Windows 7 Ultimate x64 
MonitorKeyboardPowerCase
Acer 19 Inch 1440x900 Microsoft Sidewinder X4 Crosair TX 750W PSU CM HAF 932 w/ 2 Red Neons 
MouseAudio
Logitech MX Revolution Creative Tactic 3D Rage 
  hide details  
Reply
post #2 of 2
From the bios snips above I can see CPU Spread Spectrum should be disabled (PCIE Spread Spectrum too)
make sure C&Q, APM C1E etc are all disabled for stress testing.

Things like the CPU/NB Freq and HT Link Speed should be manually entered, not left on auto.
Same goes for the CPU/NB voltage (manually enter voltage, not auto)

When left on auto most bios tend to over volt a system causing excess heat. The more items NOT on auto the better you'll do.
Be sure and spend some time inside the DIGI+ II settings and don't get too carried away. Some times less is more! These settings can make or break an OC so take the time to learn/research them carefully.

In case you don't already have it, check this out. It may make recording/reading the BSOD codes easier. thumb.gif
Edited by The Sandman - 6/24/13 at 3:19pm
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: AMD Motherboards
Overclock.net › Forums › AMD › AMD Motherboards › BSOD Issues on 990FX Sabertooth with 1055T proccessor.