Originally Posted by jameyscott
Depends on your mobos vrm heatsinks and how long your gfx card is. Look through some of the pages someone posted the inside dimensions with a picture.
I plan to use my MVG (ivy bridge) and then my gpu is this guy.
the PCB is actually shorter than the edge of my mobo.
Originally Posted by inedenimadam
I have a 60mm ek 360 up front. You could put a 240 up top too, but you will have to use 90degree elbows right off the rad or flip it and loose the hdd bay. I've seen someone else here that has a monsta installed in the front too..I don't know what issues he had, but the EK 60 360 does fit in push/pull with a little planning.
I haven't taken pics, but if you need pictures or if you want me to pull out the yard stick let me know. Ill help anyway I can.
Might need to ask for dimensions later as I am working on a very "unique" res with a buddy as the moment. here's a teaser
Originally Posted by strykerr1
don't quote me but i believe you can not use a 240 on top unless you invert your 360 to have the fitting on the bottom and only run 2 fans on the 360, i cant remember were for the life of me i saw a build of a 540 were a guy encountered that problem, it was a few weeks ago when i was researching this case. i know a 180 and a 360 will work and a 360 ( depending on your gpu) will only work with a pull with the fans mounted outside the case and the mesh removed , but you can put the grill back in place. if you have a reference card you might be able to to run a push i don't know because, i don't have lengths etc.
I am going to use acrylic tubing so I can Fanegle some things
might mod this case and try to throw in a 3rd or 4th rad if I can work the mods right in this case.
Plan is to start build in summer as I can fund it easily and plan accordingly along the way
tell em what you guys think. I want to put a design in the res but not sure what to do for it really...